Arrowmax AMCM9008-1600-D

Arrowmax AMCM9008-1600-D Battery User Manual

For Motorola HT750, HT1250, GP328, GP338 Two-Way Radios

Introducción

This manual provides essential information for the safe and effective use of your Arrowmax AMCM9008-1600-D Ni-MH battery pack. This battery is designed as a replacement for Motorola HNN9011, HNN9012, HNN9009, and HNN9008 batteries, compatible with various Motorola two-way radio models including HT750, HT1225, HT1250, GP328, and GP338. Please read this manual thoroughly before initial use and retain it for future reference.

Información importante de seguridad

Observe the following safety precautions to prevent damage to the battery, radio, or personal injury:

Carga inicial: Upon delivery, the battery is not fully charged. It is important to recharge the battery overnight (approximately 12-16 hours) before its first use to ensure optimal performance and battery life.

Arrowmax AMCM9008-1600-D Ni-MH Battery Pack with warning label

Figura 1: Frente view of the Arrowmax AMCM9008-1600-D Ni-MH battery pack, showing the product label and safety warnings.

Producto terminadoview

The Arrowmax AMCM9008-1600-D is a high-quality Ni-MH (Nickel-Metal Hydride) battery pack designed for reliable power to your compatible Motorola two-way radios. It features a robust construction and includes a heavy-duty spring belt clip for convenient carrying.

Características principales:

Compatibilidad:

This battery pack is compatible with the following Motorola two-way radio models and replaces the following OEM battery part numbers:

Atrás view of Arrowmax battery with heavy-duty spring belt clip

Figura 2: Posterior view of the Arrowmax battery pack, illustrating the integrated heavy-duty spring belt clip.

Configuración e instalación

  1. Deshacer: Retire con cuidado la batería de su embalaje.
  2. Carga inicial: Before first use, place the battery in a compatible charger and charge it overnight (12-16 hours). Refer to the "Charging the Battery" section for details.
  3. Adjuntar a la radio: Align the battery pack with the battery compartment on the back of your Motorola two-way radio. Slide the battery into place until it clicks securely. Ensure the battery is fully seated to maintain proper contact.
  4. Remove from Radio: To remove the battery, locate the battery release latch (usually at the bottom or side of the battery compartment on the radio). Press the latch and slide the battery pack downwards or outwards to detach it from the radio.
  5. Belt Clip Attachment (if separate): If the belt clip is not pre-attached, align the clip with the designated slots on the back of the battery and slide it into place until it locks. To remove, follow the reverse procedure, often involving a small tab or release mechanism on the clip itself.

Instrucciones de funcionamiento

Carga de la batería:

Use only a charger specifically designed for Ni-MH batteries and compatible with your Motorola radio battery type. Incompatible chargers can damage the battery or pose a safety risk.

  1. Conectar el cargador: Plug the charger's power adapter into an appropriate electrical outlet.
  2. Insertar batería: Place the battery pack into the charging slot of the charger. Ensure the battery contacts align correctly with the charger terminals.
  3. Observe Indicator: The charger typically has an LED indicator that shows the charging status (e.g., red for charging, green for fully charged). Refer to your charger's manual for specific indicator meanings.
  4. Tiempo de carga: For initial use, charge the battery overnight (12-16 hours). Subsequent charges typically take 8-12 hours for a full charge, depending on the charger and battery depletion level.
  5. Retire la batería: Once fully charged, remove the battery from the charger. Avoid leaving batteries on charge indefinitely after they are full, as this can reduce battery life over time.
Arrowmax battery in a charging dock

Figure 3: An Arrowmax battery pack placed in a compatible charging dock, indicating the charging process.

Using the Battery with Your Radio:

Once the battery is installed and fully charged, your radio is ready for use. Refer to your radio's instruction manual for specific operating procedures.

Mantenimiento y almacenamiento

Solución de problemas

Problema Posible causa Solución
La batería no se carga.
  • Improperly seated in charger.
  • El cargador no está encendido.
  • Contactos de batería sucios.
  • Cargador o batería defectuoso.
  • Ensure battery is correctly inserted.
  • Verifique la conexión de alimentación al cargador.
  • Limpie los contactos de la batería y del cargador.
  • Test with a different known-good charger or battery if available.
Tiempo de funcionamiento corto después de la carga completa.
  • Battery not fully charged initially.
  • La batería está llegando al final de su vida útil.
  • Temperaturas extremas de funcionamiento.
  • Perform an overnight initial charge (12-16 hours).
  • Consider replacing the battery if it's old or has been heavily used.
  • Operate radio within recommended temperature ranges.
Battery does not fit radio.
  • Incorrect battery model for your radio.
  • Instalación incorrecta.
  • Verify your radio model against the compatibility list in this manual.
  • Ensure correct alignment and firm seating during installation.

Presupuesto

Número de modelo AMCM9008-1600-D
Química de la batería Ni-MH (níquel-hidruro metálico)
Volumentage 7.2 V
Capacidad 2500 mAh
Radios compatibles Motorola HT750, HT1225, HT1250, GP328, GP338
Replaces OEM HNN9011, HNN9012, HNN9009, HNN9008
Approx. Weight (per battery) ~0.51 lbs (based on 2.05 lbs for 4-pack)
Fabricante Arrowmax

Garantía y soporte

For warranty information or technical support regarding your Arrowmax battery pack, please refer to the seller's policies or contact Arrowmax Communications, INC directly. Contact details are typically available on the product packaging or the seller's websitio.

Recursos en línea: Para información adicional o para view other products, visit the Arrowmax Store on Amazon.