BFT Clonix 2E 2-Channel Receiver User Manual

1. Introducción

The BFT Clonix 2E is a high-performance 2-channel radio receiver designed for use with BFT MITTO, KLEIO, and TRC remote control transmitters. Operating at 433.92 MHz, this receiver provides reliable wireless control for various automation systems, such as gates, garage doors, and barriers. It features a substantial memory capacity, capable of storing up to 128 remote controls, making it suitable for both residential and commercial applications.

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of your Clonix 2E receiver. Please read this manual thoroughly before installation and keep it for future reference.

Figure 1: BFT Clonix 2E 2-channel receiver. This image shows the compact, grey housing of the receiver, designed for discreet installation.

2. Información de seguridad

Instrucciones de seguridad importantes:

• Desconecte siempre la alimentación antes de realizar cualquier procedimiento de instalación, mantenimiento o solución de problemas.
• La instalación debe ser realizada por personal calificado de acuerdo con todos los códigos y regulaciones eléctricas locales.
• Do not expose the receiver to moisture, rain, or extreme temperatures.
• Asegure una conexión a tierra adecuada para evitar descargas eléctricas.
• Use only BFT original spare parts and accessories.
• Keep packaging materials (plastic bags, polystyrene, etc.) out of reach of children, as they can be a source of danger.

3. Contenido del paquete

Verifique que todos los artículos estén presentes y sin daños al abrir el paquete:

• BFT Clonix 2E 2-channel receiver unit
• Manual de instrucciones
• Mounting screws (if included)
• Antenna wire (if external)

Figure 2: Package contents. This image displays the Clonix 2E receiver alongside its accompanying instruction manual, indicating typical items found in the product packaging.

4. Configuración e instalación

The Clonix 2E receiver is designed for easy integration into existing or new automation systems. Follow these steps for proper installation:

4.1 Montaje del receptor

1. Choose a suitable location for mounting the receiver. It should be protected from direct weather exposure and easily accessible for wiring.
2. Secure the receiver to a flat, stable surface using appropriate screws.

4.2 conexiones de cableado

Refer to the internal wiring diagram for correct connections. The Clonix 2E operates on 12-24V AC/DC power.

Figure 3: Internal components and wiring terminals. This image provides a view inside the Clonix 2E receiver, highlighting the terminal block for electrical connections and the antenna wire.

• Fuente de alimentación: Connect the 12-24V AC/DC power supply to the designated terminals (usually marked + and - or AC/DC).
• Canales de salida: Connect the two output channels to your automation system's control inputs. These are typically dry contact relays.
• Antena: Connect the antenna wire to the antenna terminal for optimal range. Ensure the antenna is extended and positioned for best signal reception.

4.3 Programación de controles remotos

The Clonix 2E can store up to 128 remote controls. The programming procedure typically involves pressing a button on the receiver and then activating the remote control.

1. Locate the programming button on the receiver's circuit board (often labeled "PROG" or "MEM").
2. Press and hold the programming button until an indicator LED (if present) illuminates or flashes.
3. Mientras el LED esté activo, presione el botón de su control remoto que desea programar.
4. The LED should change state (e.g., flash rapidly, turn solid, or turn off) to indicate successful programming.
5. Repita este procedimiento para controles remotos o botones adicionales según sea necesario.
6. To clear all programmed remotes, consult the specific instructions provided with your receiver, as this often involves holding the programming button for an extended period.

5. Instrucciones de funcionamiento

Once installed and programmed, operating the Clonix 2E receiver is straightforward:

• Ensure the receiver is powered on and correctly connected to your automation system.
• Use a programmed BFT MITTO, KLEIO, or TRC remote control.
• Press the desired button on the remote control. The receiver will activate the corresponding output channel, triggering the connected device (e.g., opening/closing a gate).
• El alcance operativo máximo es de aproximadamente 200 metros, aunque puede variar según factores ambientales y obstáculos.

6. Mantenimiento

The BFT Clonix 2E receiver requires minimal maintenance to ensure long-term reliable operation:

• Limpieza: Periodically clean the exterior of the receiver with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Conexiones: Inspeccione anualmente todas las conexiones del cableado para asegurarse de que estén seguras y libres de corrosión.
• Antena: Asegúrese de que la antena no esté dañada y esté posicionada de manera óptima para la recepción de la señal.
• Protección ambiental: Verify that the receiver remains protected from moisture and extreme temperatures.

7. Solución de problemas

If you experience issues with your Clonix 2E receiver, consult the following table:

8. Especificaciones

Technical specifications for the BFT Clonix 2E 2-channel receiver:

Figure 4: Product label with specifications. This image provides a detailed view of the Clonix 2E's label, confirming its model type, operating frequency, and power requirements.

9. Garantía y soporte

BFT products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official BFT webSitio. Conserve su comprobante de compra para reclamaciones de garantía.

For technical support, troubleshooting assistance beyond this manual, or to inquire about spare parts, please contact BFT customer service or your authorized BFT dealer. Contact information can typically be found on the BFT official websitio o en el embalaje del producto.

BFT Official Websitio: www.bftautomation.com