1. Introducción
The Xfinity XR2 Remote Control is designed to provide seamless control over your Xfinity HD and HD-Digital Receivers, as well as your television and audio devices. This manual will guide you through the process of setting up, operating, and maintaining your remote control.
Image: Two Xfinity XR2 remote controls, highlighting their design and button layout.
2. Configuración
2.1. Instalación de la batería
Your XR2 remote requires four (4) AA batteries. To install:
- Localice la tapa del compartimiento de la batería en la parte posterior del control remoto.
- Deslice la cubierta hacia abajo y levántela.
- Insert the four AA batteries, ensuring the positive (+) and negative (-) terminals align with the indicators inside the compartment.
- Vuelva a colocar la tapa del compartimiento de la batería deslizándola en su lugar hasta que encaje firmemente.
2.2. Initial Programming and Pairing
The XR2 remote can operate in either Infrared (IR) or Radio Frequency (RF) mode. For older Cisco HD DVRs or similar models, you may need to configure it for IR output.
2.2.1. Configuring for IR Mode (if needed)
- Mantenga pulsado el Configuración button (located at the very bottom left of the remote) until the red LED light at the top of the remote turns green.
- Presione el A key (located above the numeric keys). The green light will flash three times, indicating the remote is now configured for IR output.
- The remote should now be ready for use with your DVR.
2.2.2. Programming for TV and Audio Devices
To control your television or audio receiver, you will need to program the remote using specific 5-digit codes provided in the accompanying pamphlet or available from Xfinity support. Follow the instructions provided with your remote for TV code entry.
3. Instrucciones de funcionamiento
The XR2 remote features a variety of buttons for controlling your Xfinity DVR and connected devices. Familiarize yourself with the layout and functions below:
- Power (All Power): Turns on/off your TV and DVR simultaneously.
- Entrada de televisión: Cycles through video inputs on your television.
- VOLUMEN +/-: Adjusts the volume of your television or audio receiver.
- Silenciar: Silencia o reactiva el audio.
- Canal +/-: Changes channels on your DVR.
- Search (Q): Accesses the search function.
- Transport Controls (Play, Pause, Rewind, Fast Forward, Stop, Record): Controls playback of live TV and recorded content.
- Xfinity/Menu: Accesses the Xfinity menu.
- Guía: Muestra la guía de programación.
- Aceptar/Seleccionar: Confirms selections and opens menus.
- Flechas de navegación: Moves through menus and guide listings.
- Pg Up/Down: Scrolls through pages in the guide or menus.
- Último: Vuelve al anterior viewcanal ed.
- Información: Muestra información sobre el programa actual.
- Salida: Sale de menús o guías.
- Favorito: Accede a tu lista de canales favoritos.
- Botones A, B, C, D: Botones sensibles al contexto para diversas funciones dentro de los menús.
- Teclado numérico (0-9): Ingresa directamente los números de canal.
- Configuración: Se utiliza para programar el control remoto.
- Espacio: Used for text entry.
- Intercambio: Swaps between two tuners on compatible DVRs.
4. Mantenimiento
To ensure the longevity and optimal performance of your XR2 remote control, follow these maintenance guidelines:
- Limpieza: Utilice un paño suave y seco para limpiar el control remoto. Para suciedad difícil, ligeramente dampEnjuague el paño con agua o un limpiador suave no abrasivo. Evite la humedad excesiva.
- Reemplazo de batería: Replace batteries when the remote's response becomes sluggish or the LED indicator does not light up consistently. Always replace all four batteries at the same time with new AA alkaline batteries.
- Almacenamiento: Guarde el control remoto en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
- Evite las gotas: Proteja el control remoto contra impactos físicos, ya que las caídas pueden dañar los componentes internos.
5. Solución de problemas
If you encounter issues with your XR2 remote, try the following solutions:
- El control remoto no responde:
- Compruebe que las pilas estén correctamente insertadas y tengan suficiente carga. Reemplácelas si es necesario.
- Ensure there is a clear line of sight between the remote and your DVR/TV if operating in IR mode.
- Remote Not Controlling TV/Audio:
- Re-attempt the TV/audio programming steps using the correct 5-digit code for your device.
- Verify that the remote is configured for the correct mode (IR or RF) as described in Section 2.2.1.
- Remote Needs Reset:
- If the remote is behaving erratically, you can perform a factory reset. Press and hold the Configuración button until the LED turns green, then enter 9-8-1. The LED will flash, indicating a successful reset. You will then need to re-program the remote.
- Botones que no funcionan:
- Asegúrese de que no haya residuos alojados debajo de los botones.
- If only specific buttons are not working, the remote may be faulty and require replacement.
6. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | XR2 (4330948498) |
| Dimensiones del producto | 7.99 x 5.98 x 2.01 pulgadas |
| Peso del artículo | 13.6 onzas |
| Pilas necesarias | 4 pilas AA |
| Tecnología de conectividad | Infrarrojos (IR) |
| Dispositivos compatibles | HDTV, DVR, Television |
| Máximo de dispositivos compatibles | 1 (DVR/TV combination) |
| Característica especial | Diseño ergonómico |
| Fabricante | Xfinity |
7. Garantía y soporte
For warranty information or technical support, please refer to the documentation provided with your Xfinity service or visit the official Xfinity support website. You may also contact Xfinity customer service directly for assistance with your XR2 remote control.
