Introducción
The Fluval Flex Freshwater Kit (Model 15006) is a contemporary aquarium designed for freshwater use. It features a distinctive curved front, customizable LED lighting, and a powerful 3-stage filtration system to provide optimal water quality for aquatic life. This manual provides detailed instructions for setup, operation, and maintenance.
Información de seguridad
ADVERTENCIA: Este producto contiene sustancias químicas que el estado de California reconoce como causantes de cáncer, defectos de nacimiento u otros daños reproductivos.
Always follow local electrical codes and safety guidelines when installing and operating electrical equipment near water. Ensure all connections are secure and dry before plugging into a power source. Do not immerse electrical components in water unless explicitly designed for submersion.
Contenido del paquete
The Fluval Flex Freshwater Kit includes the following components:
- Glass Aquarium with Cover and Anti-Slip Pad
- LED Lighting System (7500K White + RGB LEDs)
- FLEXPad Remote Control
- Seguro, bajo volumentage Transformador
- Circulation Pump with Multi-Directional Dual Output Nozzle (132 US Gal/h / 500 L/h)
- Foam Filter Block with Handle (Mechanical Filtration)
- Activated Carbon Insert (Chemical Filtration)
- BioMax Insert (Biological Filtration)
Note: Submersible heater (e.g., Fluval M50W Heater) and protein skimmer (e.g., PS2 Mini Protein Skimmer) are sold separately and are not included in this kit.
Image: The Fluval Flex 15 Gallon Aquarium Kit, displaying the glass tank, LED light, remote, pump, and filter media.
Instrucciones de instalación
1 Colocación
Place the aquarium on a sturdy, level surface capable of supporting the full weight of the tank when filled with water and decorations. Ensure it is away from direct sunlight, heat sources, and areas with significant temperature fluctuations.
2. Instalación de medios filtrantes
- Remove all filter media from their protective plastic bags.
- Rinse the Activated Carbon Insert and BioMax Insert thoroughly under cool tap water before use to remove any dust.
- Place the Foam Filter Block into the designated rear filter compartment.
- Insert the rinsed Activated Carbon into the top section of the foam filter block.
- Insert the rinsed BioMax into the bottom section of the foam filter block.
Image: A diagram illustrating the three-stage filtration system, showing the placement of foam, carbon, and Biomax media within the rear compartment.
3. Pump and Output Nozzle Setup
- Connect the flexible rubber tube to the circulation pump and the multi-directional dual output nozzle.
- Securely place the assembled pump and output nozzle into the rear filter compartment. Ensure all connections are tight to prevent leaks.
- Position the multi-directional dual outputs to achieve desired water flow within the aquarium.
4. LED Lighting System Installation
- Attach the LED lighting system to the designated slot on the aquarium cover.
- Connect the LED light to the safe, low voltage transformer, and then plug the transformer into a power outlet.
Imagen: Un primer plano view of the LED lighting system, highlighting its adjustable 7500K White + RGB LEDs.
5. Llenado del acuario
- Carefully fill the aquarium with dechlorinated freshwater. Avoid disturbing the substrate.
- Add any desired decorations or live plants.
- Allow the tank to cycle for several weeks before introducing fish to establish beneficial bacteria.
Instrucciones de funcionamiento
Control de iluminación LED
The LED lighting system is controlled via the included FLEXPad remote.
- Use the remote to adjust the 7500K White + RGB LEDs for endless color blends.
- Select from various special effects such as fading cloud cover and lightning bolts.
- The light fixture itself may also feature a touch-sensitive control for basic day/night illumination toggling.
Image: The FLEXPad remote control, displaying buttons for color selection, brightness adjustment, and special lighting effects.
Mantenimiento
Filter Media Replacement
Regular replacement of filter media is crucial for maintaining optimal water quality.
- Replace the Activated Carbon Insert every 2-4 weeks.
- Replace the BioMax Insert every 2-3 months.
- To ensure constant presence of beneficial bacteria, do not replace all filtration media at the same time.
Cambios de agua
Perform regular partial water changes (e.g., 25% weekly) to remove accumulated nitrates and replenish essential minerals.
The easy feed top cover opening and removable lid facilitate convenient access for maintenance.
Solución de problemas
Flujo de agua reducido
- Check the circulation pump for blockages or debris. Clean the pump and impeller if necessary.
- Ensure filter media is not excessively clogged. Replace mechanical filter media (foam) if heavily soiled.
LED Remote Not Responding
- Check the battery in the FLEXPad remote.
- Ensure the infrared remote sensor on the canopy is clear of obstructions.
Water Discoloration or Odor
- Replace the Activated Carbon Insert.
- Perform a partial water change.
- Check for decaying organic matter (e.g., uneaten food, dead plants/fish) and remove it.
Presupuesto
| Característica | Especificación |
|---|---|
| Marca | Fluval |
| Número de modelo | 15006 |
| Volumen del tanque | 15 galones (57 litros) |
| Dimensiones (L x An x Al) | 16.14 x 15.35 x 15.35 pulgadas (41 x 39 x 39 cm) |
| Material | Vaso |
| Color | Negro |
| Temperatura de color del LED | 7500K |
| Salida de bomba | 132 US Gal/h (500 L/h) |
| Peso del artículo | 28 libras (12.72 kg) |
Image: A diagram showing the dimensions of the Fluval Flex 15 Gallon aquarium.
Garantía y soporte
This product is covered by a Manufacturer Warranty. For specific details regarding your warranty, please refer to the documentation included with your purchase or contact Fluval customer support.
Para obtener información adicional sobre el producto y asistencia, visite el sitio web Fluval Store.
