Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your hykolity 4FT LED Shop Light. Please read this manual thoroughly before installation and retain it for future reference.
Información de seguridad
- Desconecte siempre la alimentación desde el disyuntor antes de realizar la instalación o el mantenimiento.
- Asegúrese de que el volumen de suministrotage is compatible with the fixture (100-277V).
- No mire directamente a la fuente de luz LED.
- Este producto está diseñado únicamente para uso en interiores.
- Si no está seguro acerca de la instalación, consulte a un electricista calificado.
Contenido del paquete
Each hykolity 4FT LED Shop Light package includes the following items:
- LED Shop Light Fixture (4 units per pack)
- Cadenas colgantes
- Tornillos de montaje
- Anclajes de plástico
- Power Cord with Pull Chain Switch
- Ganchos en forma de J
Figura 1: Accesorios incluidos y dimensiones del producto.
Presupuesto
| Característica | Detalle |
|---|---|
| Modelo | HBSP-MB4F-50K |
| Quétage | 42 W |
| Brillo | 4400 lúmenes |
| Temperatura de color | 5000K luz diurna blanca |
| Volumentage | 100-277 V |
| Esperanza de vida | 50,000 horas |
| Dimensiones (L x An x Al) | 48" x 5.4" x 2.24" |
| Material | Plástico |
| Características especiales | Shatter Resistant, Linkable (up to 6 units) |
| Certificaciones | Certificación ETL |
| Uso en interiores y exteriores | Interior |
Instalación
The hykolity LED Shop Light offers two primary installation methods: hanging mount and surface mount. Both methods are designed for quick and easy setup.
1. Hanging Mount Installation
- Locate suitable mounting points on your ceiling or overhead structure. Ensure these points can support the weight of the fixture.
- Screw the provided J-hooks into the ceiling at the desired locations.
- Attach the hanging chains to the J-hooks and then to the designated attachment points on the light fixture. Adjust the chain length to achieve the desired hanging height.
- Enchufe el cable de alimentación a una toma de corriente compatible.
2. Instalación de montaje en superficie
- Mark the desired mounting locations on the ceiling or wall. Use the light fixture as a template to ensure correct spacing for the mounting screws.
- Drill pilot holes at the marked locations. Insert plastic anchors if mounting into drywall.
- Secure the light fixture to the ceiling or wall using the provided mounting screws.
- Enchufe el cable de alimentación a una toma de corriente compatible.
Figure 2: Quick and easy installation methods.
Función enlazable
These shop lights are designed to be linkable, allowing you to connect up to 6 units together using the integrated plug connection. This feature is ideal for illuminating larger areas such as garages, workshops, or warehouses with a single power source.
Figure 3: Detail of the pull chain switch and linkable design.
Video 1: Official Hykolity video demonstrating the unboxing, installation, and features of the 42W LED Shop Light, including its linkable design and flicker-free operation.
Instrucciones de funcionamiento
The hykolity LED Shop Light is designed for simple operation. Once installed and plugged in, use the integrated pull chain switch to control the light.
- Encender/Apagar: Pull the chain once to turn the light on. Pull it again to turn it off.
- Linkable Operation: If multiple units are linked, pulling the chain on the primary unit will control all connected lights simultaneously.
Mantenimiento
- Limpieza: Ensure the fixture is unplugged before cleaning. Wipe the surface with a soft, damp Paño. No utilice limpiadores abrasivos ni disolventes.
- Reemplazo de bombilla: The LED light source is integrated and designed for a long lifespan (50,000 hours), requiring no bulb replacement under normal use.
- Inspección: Periodically check the power cord and hanging chains for any signs of wear or damage. Replace if necessary.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No hay suministro de energía. Pull chain switch not activated. | Compruebe si el cable de alimentación está bien enchufado. Verifique que el disyuntor esté encendido. Pull the chain switch firmly. |
| La luz parpadea. | Conexión suelta. Incompatible dimmer switch (not recommended). | Asegúrese de que todas las conexiones sean seguras. This fixture is not designed for use with dimmer switches. |
| La luz es tenue. | Acumulación de polvo. | Clean the light fixture as per maintenance instructions. |
Garantía y soporte
The hykolity 4FT LED Shop Light is confidently guaranteed for 5 años from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims, technical support, or any inquiries, please contact hykolity customer service.
For more information, visit the official hykolity store: hykolity Store
Aplicaciones recomendadas
The hykolity 4FT LED Shop Light is versatile and suitable for a variety of indoor environments requiring bright, efficient lighting:
- Garajes
- Talleres
- Workbench Areas
- Áreas de almacenamiento
- Almacenes
- Sótanos
- Equipment Rooms
- Oficinas
Figura 4: Examples of suitable applications for the LED shop light.
Beneficios clave
- Súper brillante: Delivers 4400 lumens at 5000K Daylight White, providing excellent illumination.
- Eficiencia energética: Uses only 42W, offering a 70% reduction in energy usage compared to traditional fluorescent fixtures.
- De larga duración: Rated for 50,000 hours of maintenance-free light.
- Sin destellos: Provides stable and consistent lighting without annoying flicker.
- Durable: ETL certified for quality and reliability, featuring a shatter-resistant design.
Figure 5: Comparison highlighting the brightness and flicker-free performance.
