COMTREND PG-9172AC

Comtrend G.hn 1.2 Gbps Powerline Ethernet Adapter AC1200 PG-9172AC User Manual

Marca: COMTREND | Modelo: PG-9172AC

1. Introducción

The Comtrend G.hn 1.2 Gbps Powerline Wireless Ethernet Bridge Adapter AC1200 PG-9172AC is designed to enhance your home network by transforming any electrical outlet into a high-speed internet access point. This solution provides a strong and stable connection without requiring additional wiring. Utilizing G.hn technology, data can be transmitted between electrical circuits, ensuring minimal interference and optimized performance for activities such as video streaming. It is suitable for homes with multiple devices and high-bandwidth demands. The adapter features dual-band AC1200 WiFi and a Gigabit Ethernet port, offering flexible connectivity options for streaming, gaming, or remote work. This device is intended to extend internet coverage to areas that are difficult to reach with standard Wi-Fi.

2. ¿Qué hay en la caja?

  • Comtrend G.hn 1.2 Gbps Powerline Ethernet Adapter (PG-9172AC)
  • Guía de instalación rápida (QIG)
  • Cable Ethernet

3. Instrucciones de configuración

3.1 Conexión inicial y emparejamiento

To begin, ensure you have at least two G.hn compatible devices. For initial setup, plug both adapters directly into wall outlets in the same room. Avoid using power strips or surge protectors, as these can block signals and hinder performance.

Upon plugging in, observe the LED indicators on the adapters. The Power light should be green, and the Connection light should be solid. If the Connection light is not solid green, you may need to pair the devices manually.

To pair the adapters, press and hold the "Config" button on both adapters for approximately 15 seconds. This action secures the network and synchronizes the devices.

3.2 Wi-Fi Model Setup (PG-9172AC)

For models with wireless capabilities, such as the PG-9172AC, follow these steps:

  1. Connect one PG-9172AC adapter to your existing router using the provided Ethernet cable.
  2. Plug the second PG-9172AC adapter into a wall outlet in a remote room where you desire extended Wi-Fi coverage.
  3. Pair the two adapters as described in Section 3.1 by holding the "Config" button on both for 15 seconds.

Your Wi-Fi network name (SSID) and password are typically located on a label at the bottom of the unit. You can change these settings by logging into the unit's web interface, as detailed in the full user manual.

Comtrend G.hn 1.2 Gbps Powerline Ethernet Adapter PG-9172AC

Image: Comtrend G.hn 1.2 Gbps Powerline Ethernet Adapter (PG-9172AC). This image shows the top-down view of the black adapter with two antennas, indicating its wireless capabilities.

4. Instrucciones de funcionamiento

The Comtrend PG-9172AC adapter provides a robust network connection through your home's electrical wiring. Its dual-band AC1200 Wi-Fi and Gigabit Ethernet port offer versatile connectivity for various devices.

  • Wi-Fi de doble banda: The AC1200 Wi-Fi supports both 2.4GHz and 5GHz bands, allowing for flexible connection options for different devices and reducing network congestion.
  • Puerto Gigabit Ethernet: Connect wired devices such as smart TVs, gaming consoles, or desktop computers directly to the adapter for maximum speed and stability.
  • Calidad de servicio (QoS): The 8-level QoS prioritization feature helps manage network traffic, ensuring that critical applications like video streaming or online gaming receive sufficient bandwidth for smooth performance.
  • Conexión segura: The one-touch pairing process not only establishes a connection but also encrypts your network, protecting your data from unauthorized access.

5. Mantenimiento

To ensure optimal performance and longevity of your Comtrend Powerline Adapter, consider the following maintenance tips:

  • Manténlo limpio: Regularly wipe the device with a soft, dry cloth to remove dust. Ensure ventilation holes are clear of obstructions.
  • Ventilación: Place the adapter in a well-ventilated area to prevent overheating. Do not cover the device or place it in enclosed spaces.
  • Conexiones firmes: Periodically check that the adapter is firmly plugged into the wall outlet and that all Ethernet cables are securely connected.
  • Evite la sobrecarga: Do not plug the adapter into an overloaded electrical circuit, as this can affect performance.

6. Solución de problemas

6.1 Sin conexión

  • Toma de corriente directa de pared: Ensure both Powerline adapters are plugged directly into wall outlets, not power strips, surge protectors, or extension cords. These can significantly degrade or block the Powerline signal.
  • Comprobar los LED: Verify the Power LED is green and the Powerline Connection LED is solid green on both adapters. If the Connection LED is off or blinking, the devices are not properly paired or connected.
  • Re-Pair Devices: If the Connection LED is not solid, press and hold the "Config" button on both adapters for approximately 15 seconds to re-pair them. Do this within two minutes of each other.
  • Test in Same Room: For initial troubleshooting, plug both adapters into wall outlets in the same room to confirm they can establish a connection.

6.2 Velocidades lentas

While G.hn technology supports speeds up to 1200 Mbps, actual performance can vary based on your home's electrical wiring and other factors.

  • Avoid Interfering Devices: Do not plug Powerline adapters into outlets connected to AFCI (Arc Fault Circuit Interrupter) or GFCI (Ground Fault Circuit Interrupter) breakers. Also, avoid outlets near noisy electrical devices like phone chargers, hair dryers, or microwaves, as these can cause significant speed drops (potentially to 40-80 Mbps).
  • Circuito eléctrico: Powerline adapters perform best when on the same electrical circuit. Performance may decrease if devices are on different circuits.
  • Calidad del cableado: Older or poorly maintained electrical wiring can impact Powerline performance.
  • Contactar con soporte: If you are consistently experiencing speeds below 40 Mbps after trying the above steps, contact customer support for further assistance.

6.3 Apartment/Multi-Dwelling Unit (MDU) Issues

In multi-dwelling units like apartments, neighboring Powerline networks can potentially interfere with your connection.

  • Network Isolation: G.hn's advanced algorithms are designed to isolate your network from others. However, for enhanced security and performance, it is recommended to secure your network.
  • Proteja su red: Hold the "Config" button on each adapter for 15 seconds to encrypt your Powerline network. This ensures that only your paired devices can communicate over your electrical wiring.
  • Límite de dispositivos: You can connect up to 16 G.hn devices within a single Powerline network, making it suitable for larger homes or small office environments.

7. Especificaciones

Característica Detalle
Marca COMPRENDER
Número de modelo PG-9172AC
Tipo inalámbrico 802.11ac, 802.11n
Interfaz de hardware Ethernet
Protocolo de enlace de datos Ethernet
Velocidad de transferencia de datos 1200 megabits por segundo
Dispositivos compatibles De oficina
Peso del artículo 1.75 libras (0.79 kg)
Dimensiones del producto (LxAnxAl) 5.35 x 1.61 x 7.08 pulgadas (13.59 x 4.09 x 17.98 cm)
Fecha de primera disponibilidad 24 de abril de 2017

8. Soporte

If you encounter issues that cannot be resolved using the troubleshooting steps provided, or if you require further assistance, please contact Comtrend customer support. Refer to the Quick Installation Guide (QIG) included with your product for specific contact information or visit the official Comtrend websitio.

Documentos relacionados - PG-9172AC

Preview Guía de instalación rápida del adaptador Ethernet Powerline Comtrend PG-9172PoE
Aprenda a configurar rápidamente sus adaptadores Ethernet Comtrend PG-9172PoE y PG-9172 Powerline para ampliar su red utilizando el cableado eléctrico existente. Esta guía abarca la instalación básica, la creación de redes y la resolución de problemas.
Preview Manual del usuario del adaptador Ethernet Powerline Comtrend PG-9182PT
Manual de usuario del adaptador Ethernet Powerline Comtrend PG-9182PT, que detalla la instalación, configuración y solución de problemas. Aprenda a optimizar su red doméstica con la tecnología G.hn.
Preview Manual del usuario de Comtrend PowerGrid-9182AC: Configuración del adaptador WiFi Ethernet Powerline
Manual de usuario completo del adaptador WiFi Ethernet Powerline Comtrend PowerGrid-9182AC. Incluye guía de configuración, instrucciones de seguridad, solución de problemas y opciones de configuración detalladas para funciones de red, inalámbricas y G.hn.
Preview Guía de instalación rápida del extensor WiFi de malla de doble banda Comtrend WAP-5903 AC1200
Guía de inicio rápido para configurar el extensor WiFi de doble banda Comtrend WAP-5903 AC1200 con malla mejorada. Aprenda a conectar y configurar su red de malla para una mejor cobertura WiFi en toda la casa.
Preview Manual del usuario de Comtrend GCA-7000: Guía de instalación, configuración y funcionamiento
Obtenga instrucciones detalladas para el adaptador Ethernet sobre coaxial Comtrend GCA-7000 G.hn. Este manual de usuario abarca la configuración, la seguridad, la configuración de red y las funciones avanzadas para un rendimiento óptimo.
Preview Manual del usuario del punto de malla inalámbrico Comtrend WAP-5922MP AC1200
Este manual de usuario proporciona instrucciones detalladas para instalar, configurar y operar el punto de malla inalámbrico de doble banda Comtrend WAP-5922MP AC1200 en modo repetidor y punto de acceso. Conozca las características, los requisitos del sistema y la solución de problemas.