Introducción
This user manual provides detailed instructions for the installation, operation, and maintenance of your KICKER 43PXBTC Weather Proof Bluetooth Controller. Please read this manual thoroughly before using the device to ensure proper functionality and safety. Keep this manual for future reference.
Image: The KICKER 43PXBTC Weather Proof Bluetooth Controller, a compact black device with a central rotary knob featuring volume controls (+/-) and track navigation buttons (previous/next).
Información de seguridad
Observe siempre las siguientes precauciones de seguridad:
- Asegúrese de que el cableado y las conexiones sean adecuados para evitar cortocircuitos o daños eléctricos.
- No exponga el dispositivo a temperaturas extremas ni a la luz solar directa durante períodos prolongados.
- While the device is weather-proof, avoid submerging it in water.
- Si no está seguro de alguno de los pasos, consulte a un profesional para la instalación.
Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- KICKER 43PXBTC Bluetooth Controller
- Herrajes de montaje (tornillos, soportes)
- Mazo de cables
- Manual de usuario (este documento)
Configuración e instalación
Follow these steps for proper installation of your KICKER 43PXBTC controller.
Montaje del controlador
- Choose a suitable, easily accessible location on your Polaris RZR, ATV, UTV, or golf cart. Ensure the surface is flat and secure.
- Drill the necessary holes for mounting the controller using the provided template (if applicable) or by carefully marking the screw positions.
- Secure the controller using the supplied mounting hardware. Do not overtighten.
Conexiones de cableado
The 43PXBTC requires power, ground, and an audio output connection. Refer to the wiring diagram below for detailed connections.
- Cable rojo: Connect to a switched +12V power source.
- Cable negro: Connect to a chassis ground.
- Alambre azul: Remote turn-on output for amplificador (si corresponde).
- Salidas RCA: Connect to the audio input of your ampLifier o unidad principal.
Asegúrese de que todas las conexiones estén seguras y aisladas para evitar cortocircuitos.
Instrucciones de funcionamiento
Learn how to use your KICKER 43PXBTC Bluetooth Controller.
Encendido/apagado
- The unit powers on automatically when the +12V switched power source is active.
- To power off, turn off the vehicle's ignition or the connected power source.
Emparejamiento Bluetooth
- Ensure the 43PXBTC is powered on.
- En su dispositivo móvil (teléfono inteligente, tableta), habilite Bluetooth y busque los dispositivos disponibles.
- Select "KICKER PXBTC" from the list of devices.
- Once paired, the LED indicator on the controller will confirm the connection (refer to LED indicator section for details).
Control de audio
- Sube el volumen: Presione el botón '+'
- Bajar volumen: Presione el botón '-'.
- Pista siguiente: Press the '>>|' button.
- Pista anterior: Press the '|<<' button.
- Reproducir/Pausa: Press the central knob (if applicable, or refer to specific model functionality).
Mantenimiento
Proper maintenance ensures the longevity of your KICKER 43PXBTC controller.
- Limpieza: Utilice un paño suave y seco.amp cloth to wipe down the controller. Avoid harsh chemicals or abrasive cleaners.
- Conexiones: Revise periódicamente todas las conexiones del cableado para asegurarse de que estén seguras y libres de corrosión.
- Almacenamiento: If storing the vehicle for an extended period, ensure the controller is powered off.
Solución de problemas
If you encounter issues with your KICKER 43PXBTC, refer to the following table:
| Problema | Posible causa | Solución |
|---|---|---|
| Sin poder | Loose power connection; Blown fuse; No +12V supply. | Check power and ground wires; Inspect and replace fuse if necessary; Verify +12V at the power source. |
| No se puede emparejar Bluetooth | Controller not in pairing mode; Device too far; Interference. | Ensure controller is powered on; Move device closer; Restart both controller and mobile device. |
| Sin salida de audio | Conexiones RCA incorrectas; Amplifier not powered on; Volume too low. | Verificar las conexiones RCA a amplifier; Check amplifier power; Increase volume on controller and connected device. |
| Conexión intermitente | Bluetooth range exceeded; Obstructions; Device interference. | Keep device within range; Minimize obstructions; Turn off other Bluetooth devices nearby. |
Presupuesto
Key technical specifications for the KICKER 43PXBTC Weather Proof Bluetooth Controller:
- Modelo: 43PXBTC
- Tipo de controlador: Mando a distancia
- Color: Negro
- Tecnología de conectividad: Auxiliar, Bluetooth
- Respuesta de frecuencia: 20Hz-20KHz (-3dB)
- THD (250mV 1kHz, AUX input, 2.5V output): <0.01%
- S/N Ratio (AU-Weight) ref 5V, minimum volume: >100dB
- Es resistente al agua: Verdadero
- Fuente de energía: Vehicle Power (12V DC)
- Dimensiones del producto: 12.7 x 12.7 x 12.7 cm; 249 g
- Dispositivos compatibles: Portátil, teléfono inteligente, tableta
Información de garantía
KICKER products are designed and engineered to provide years of trouble-free operation. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official KICKER website. Typically, KICKER offers a limited warranty against defects in materials and workmanship for a specified period from the original date of purchase.
Nota: Warranty may be voided if the product is improperly installed, abused, or modified.
Atención al cliente
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact KICKER customer support:
- Websitio: www.kicker.com
- Refer to the KICKER website for contact numbers and support hours specific to your region.
