Introducción
This instruction manual provides detailed guidance for the installation, operation, and maintenance of the Juno 6-Inch Incandescent Recessed Light Housing, Model IC22 W G. This housing is specifically designed for new construction applications and is engineered for safety, performance, and energy efficiency.
Las características principales incluyen:
- IC-Rated: Adecuado para el contacto directo con el aislamiento.
- Listado UL: Certificado para damp locations, ensuring safety and reliability.
- Air-Loc Gasket: Integrated gasket reduces air leakage, contributing to energy efficiency.
- Fácil instalación: Features push-in electrical connectors and Real Nail 3 bar hangers for secure mounting.
- Versátil: Accommodates various incandescent lamp types and trim combinations.
Información de seguridad
Always disconnect power at the circuit breaker before installing or servicing the fixture. Installation should be performed by a qualified electrician in accordance with national and local electrical codes. Ensure the housing is properly grounded.
This housing is Clasificación IC, meaning it is safe for direct contact with insulation. It is also UL listado para damp Ubicaciones, making it suitable for bathrooms, kitchens, and other areas where moisture may be present.
Configuración e instalación
The Juno IC22 W G housing is designed for new construction projects and fits ceilings up to 1 inch thick. Follow these general steps for installation:
- Prepare el techo: Ensure the ceiling joists are properly spaced to accommodate the housing's bar hangers. The housing requires a 6-7/8 inch ceiling cutout.
- Monte la carcasa: Utilize the Real Nail 3 bar hangers with telescoping arms to securely mount the galvanized steel frame between ceiling joists. The hangers are designed for quick and stable positioning.
- Alambrado: The pre-wired junction box includes (5) 1/2 inch and (1) 3/4 inch knockouts. Use the provided push-in electrical connectors to simplify wiring connections. Ensure all connections are secure and comply with electrical codes.
- Install Socket and Trim: The housing features an adjustable socket plate and a detachable medium base porcelain socket with snap-in springs. This allows for accommodation of various lamp and trim combinations. Install the desired incandescent bulb and compatible Juno 6-inch baffle trim (sold separately).
Instrucciones de funcionamiento
The Juno IC22 W G is a housing unit designed to hold an incandescent light bulb and a compatible trim. Its operation is dependent on the installed bulb and the electrical circuit it is connected to.
- Compatibilidad de bombilla: This housing accepts incandescent lamp types including A19, BR30, BR40, R20, PAR16, PAR20, and PAR30. Ensure the wattage of the chosen bulb does not exceed the maximum rating of the fixture (90 watts).
- Control de poder: The light will operate via the wall switch or control method connected to its electrical circuit.
Mantenimiento
Regular maintenance ensures optimal performance and longevity of your recessed light housing.
- Limpieza: Periodically clean the trim and bulb with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Reemplazo de bombilla: Always disconnect power before replacing a bulb. Allow the old bulb to cool completely before removal. Insert the new bulb securely into the medium base porcelain socket, ensuring it is of a compatible type and wattage.
- Inspección: Annually inspect the housing and wiring for any signs of wear, damage, or loose connections. If any issues are found, consult a qualified electrician.
Solución de problemas
If you encounter issues with your Juno recessed light housing, consider the following common troubleshooting steps:
- La luz no se enciende:
- Verifique el disyuntor para asegurarse de que se suministre energía al artefacto.
- Verify the light bulb is correctly installed and not burnt out. Try replacing it with a known working bulb.
- Asegúrese de que el interruptor de pared esté en la posición “ENCENDIDO”.
- Luz parpadeante:
- Confirm the bulb is fully screwed into the socket.
- Check for loose wiring connections in the junction box (ensure power is off before inspecting).
- Asegúrese de que la bombilla esté encendida.tage is compatible with the fixture and any dimmer switches used.
- Calentamiento excesivo:
- Asegúrese de que el bulbo tenga el agua correcta.tage is used and does not exceed the fixture's maximum rating.
- Verify that the IC-rated housing is not compromised and insulation is not directly touching non-IC rated parts (if applicable, though this model is IC-rated).
For persistent electrical issues or if you are unsure about any troubleshooting steps, consult a qualified electrician.
Presupuesto
| Atributo | Detalle |
|---|---|
| Número de modelo | IC22 W G |
| Tamaño | 6 pulgadas |
| Tipo de instalación | New Construction, Recessed |
| Material | Galvanized Steel Frame, Copper (internal components) |
| Dimensiones (producto) | 14"L x 14"W x 8"H (overall with hangers) |
| Recorte de techo | 6-7/8 pulgadas |
| Espesor del techo | Up to 1 inch |
| Tipo de fuente de luz | Incandescente |
| Base de la bombilla | E26 Medio |
| Wat máximotage | 90 vatios |
| Volumentage | 120 voltios |
| Certificaciones | UL Listed, CSA, IC-Rated, Damp Ubicación |
| Peso | 2.5 libras |
| Componentes incluidos | Alojamiento |
Garantía y soporte
The Juno 6 Inch Incandescent Recessed Light Housing (Model IC22 W G) comes with a Garantía limitada de 5 años. Please note that using trim kits from other brands may void the warranty.
For technical assistance, warranty claims, or further information, please contact Juno customer support. Refer to the official Juno websitio o embalaje del producto para obtener los datos de contacto más actualizados.
