1. Introducción
The Kramer VS-62HA is a high-performance 6x2 matrix switcher designed for 4K@60Hz (4:2:0) HDMI and analog audio signals. It incorporates advanced auto-switching capabilities and versatile control options, making it ideal for various professional AV environments. This device re-clocks and equalizes signals, allowing any of its six inputs to be routed to either or both of its two outputs simultaneously.
Key features include support for resolutions up to 4K@60Hz (4:2:0) and WUXGA, HDCP compliance, and comprehensive HDMI support for 3D, Deep Color, x.v.Color, Lip Sync, and various audio formats like Dolby TrueHD, Dolby Digital Plus, DTS-HD, and 7.1 PCM. The VS-62HA also features EDID capture, advanced auto AV switching (last-connected or priority), independent audio routing, and programmable Step-In over HDMI functionality.
2. Información de seguridad
Always read and follow all instructions carefully before operating this device. Keep this manual for future reference.
- Asegúrese de que el dispositivo esté conectado a una toma de corriente con conexión a tierra.
- No exponga el dispositivo al agua ni a la humedad excesiva.
- Evite colocar el dispositivo cerca de fuentes de calor o bajo la luz solar directa.
- No abra el dispositivo casing. Deje todo servicio a personal cualificado.
- Utilice únicamente el adaptador de corriente suministrado con la unidad.
- Desconecte la alimentación antes de limpiar o mover el dispositivo.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en su paquete:
- Kramer VS-62HA 6x2 4K HDMI/Audio Automatic Matrix Switcher
- Adaptador de corriente
- Rack Ears (for rack mounting)
- Este manual de usuario
4. Producto terminadoview
The VS-62HA features a user-friendly front panel for direct control and comprehensive rear panel connectivity.
4.1 Panel frontal
Figure 4.1: Front and Rear Panels of the Kramer VS-62HA. The top image shows the front panel with input selection buttons, EDID controls, and analog audio controls. The bottom image shows the rear panel with HDMI inputs/outputs, analog audio inputs/outputs, control ports (RS-232, Ethernet), and power input.
The front panel provides intuitive controls for input selection, EDID management, and analog audio adjustments. It includes LED indicators for power, input status, and output status.
- Botones de ENTRADAS (1-6): Selecciona la fuente de entrada HDMI.
- TO OUT 1 / TO OUT 2 Buttons: Routes the selected input to Output 1 or Output 2.
- Botón APAGADO: Disconnects the current input from the output.
- EDID Controls: Buttons for EDID management (e.g., EDID Copy, EDID Default).
- ANALOG AUDIO Control: Volume up/down, mute, and swap functions for analog audio outputs.
- Botón de bloqueo: Bloquea los controles del panel frontal para evitar cambios accidentales.
- PATTERN Button: Activates an internal test pattern generator.
4.2 Panel trasero
The rear panel houses all the necessary ports for connecting your source devices, displays, and control systems.
- ENTRADA HDMI (1-6): Puertos de entrada HDMI para conectar dispositivos fuente.
- AUDIO IN (1-6): Analog audio input ports (3.5mm jacks) corresponding to HDMI inputs.
- HDMI OUT (1-2): HDMI output ports for connecting displays.
- AUDIO OUT (1-2): Balanced analog audio output ports (terminal blocks).
- REMOTE 1 / REMOTE 2 LEDs: Indicators for remote control status.
- SETUP DIP Switches: For initial configuration settings.
- REMOTE IR: IR receiver port for remote control.
- RS-232: Serial control port for integration with control systems.
- ETERNET: RJ-45 port for network control and firmware updates.
- Botón PROGRAMA: Para actualizaciones de firmware.
- Botón de reinicio: Reinicia el dispositivo.
- Entrada de potencia: Para conectar el adaptador de corriente externo.
5. Configuración e instalación
Follow these steps to set up your Kramer VS-62HA matrix switcher.
5.1 Connecting the VS-62HA
Figure 5.1: Typical Connection Diagram for the Kramer VS-62HA. This diagram illustrates how to connect various HDMI and audio sources (laptops, VIA Connect PRO, Dante Interface) to the inputs, and how to connect displays (LCD Display) and active speakers to the outputs. It also shows connections for remote input select switches and a PC controller via Ethernet.
- Apagar todos los dispositivos: Before making any connections, ensure all devices, including the VS-62HA, are powered off.
- Conecte fuentes HDMI: Connect your HDMI source devices (e.g., Blu-ray players, computers, media streamers) to the HDMI IN 1-6 ports on the rear panel using high-quality HDMI cables.
- Conectar fuentes de audio analógicas (opcional): If using analog audio, connect your analog audio sources to the corresponding AUDIO IN 1-6 ports.
- Conectar pantallas HDMI: Connect your HDMI displays (e.g., TVs, projectors, monitors) to the HDMI OUT 1-2 ports on the rear panel.
- Connect Analog Audio Outputs: Connect your audio receivers or active speakers to the AUDIO OUT 1-2 terminal block connectors.
- Connect Control Systems (Optional):
- For RS-232 control, connect a serial cable from your control system to the RS-232 port.
- For network control, connect an Ethernet cable from your network switch/router to the ETHERNET port.
- Conecte la electricidad: Connect the supplied power adapter to the POWER input on the rear panel, then plug the adapter into a grounded AC outlet.
- Encendido: Power on the VS-62HA, then power on your source devices and displays.
5.2 Montaje en rack (opcional)
The VS-62HA can be mounted in a standard 19-inch equipment rack using the supplied rack ears. Attach the rack ears to the sides of the unit using the provided screws, then secure the unit into the rack.
6. Operating the VS-62HA
The VS-62HA can be operated via its front panel, RS-232, Ethernet, or IR remote control.
6.1 Operación del panel frontal
- Selección de entrada: Presione uno de los ENTRADAS buttons (1-6) to select the desired source.
- Enrutamiento de salida: After selecting an input, press TO OUT 1 or TO OUT 2 to route the selected input to the respective output. You can route the same input to both outputs simultaneously.
- Disconnecting an Output: Presione el APAGADO button for the desired output to disconnect the current input.
- Analog Audio Control: Utilice el VOL+, vol-, MUTE, y INTERCAMBIO buttons in the ANALOG AUDIO CONTROL section to adjust the analog audio output.
- Gestión de EDID: Use the EDID buttons to copy EDID from a connected display or load a default EDID. Refer to the full technical manual for advanced EDID settings.
- Controles de bloqueo: Presione el CERRAR button to disable front panel controls. Press again to unlock.
6.2 Cambio automático
The VS-62HA supports advanced auto-switching schemes. This feature allows the switcher to automatically switch to a newly connected or active input based on predefined rules (e.g., last-connected, priority). This can be configured via the web interface or RS-232 commands.
6.3 Control via RS-232 and Ethernet
For advanced control and integration into larger AV systems, the VS-62HA can be controlled via RS-232 serial commands or over an Ethernet network using its built-in web interface or Kramer's control software. Refer to the Kramer website for detailed command lists and software downloads.
7. Mantenimiento
Proper maintenance ensures the longevity and optimal performance of your VS-62HA.
- Limpieza: Utilice un paño suave y seco para limpiar el exterior de la unidad. No utilice limpiadores líquidos ni en aerosol.
- Ventilación: Asegúrese de que haya una ventilación adecuada alrededor de la unidad. No bloquee ninguna abertura de ventilación.
- Actualizaciones de firmware: Periodically check the Kramer Electronics website for firmware updates to ensure your device has the latest features and bug fixes. Firmware updates can typically be performed via the Ethernet port.
8. Solución de problemas
If you encounter issues with your VS-62HA, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| Sin salida de video |
|
|
| Sin salida de audio |
|
|
| Front panel unresponsive |
|
|
If the problem persists, contact Kramer technical support for further assistance.
9. Especificaciones
Technical specifications for the Kramer VS-62HA:
| Característica | Detalle |
|---|---|
| Número de modelo | FC-7 (VS-62HA) |
| Max. Velocidad de datos | 8.91Gbps (2.97Gbps per graphics channel) |
| Resolución máxima | 4K@60Hz (4:2:0) and WUXGA |
| Cumplimiento de HDCP | Sí |
| Compatibilidad con HDMI | 3D, Deep Color, x.v.Color, Lip Sync, Dolby TrueHD, Dolby Digital Plus, DTS-HD, 7.1 PCM |
| Gestión de EDID | EDID Capture, Non-Volatile EDID Storage |
| Enrutamiento de audio | Independent (breakaway) audio routing of embedded HDMI and analog audio |
| Opciones de control | IR, RS-232, Ethernet, Contact Closure, Advanced Auto Switching |
| Dimensiones del producto | 48.26 x 10.16 x 18.29 cm |
| Peso del producto | 907.18 gramos |
| Fabricante | Kramer |
| Primera fecha disponible | 22 de junio de 2017 |
10. Garantía y soporte
Kramer products are backed by a standard warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Kramer Electronics websitio.
For technical support, troubleshooting assistance, or service inquiries, please contact Kramer customer support through their official website or the contact information provided in your product documentation. When contacting support, please have your product model number (VS-62HA / FC-7) and serial number ready.
Kramer Electronics Official Websitio: www.kramerav.com
