Introducción
This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.
Información de seguridad
ADVERTENCIA:
- Always follow the assembly instructions provided in this user manual to ensure safe use.
- No exceda la capacidad máxima de peso de 275 libras (124.74 kg).
- Be cautious of the swivel feature to prevent tripping.
- Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar el ensamblaje:
- Cojín de asiento
- Cojín de espalda
- Gas Lift (Cylinder)
- Hardware (Screws, Hex Tool)
- Base (5-point star base)
- Apoyabrazos (2)
- Ruedas (5)
- Mechanism (for seat height and tilt)
Configuración y montaje
Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.
Video: AmazonBasics Mid-Back Office Chair Assembly Guide. This video demonstrates the step-by-step process of assembling the chair, including attaching the casters, cylinder, mechanism, seat, armrests, and backrest, and tightening all screws.
- Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
- Cilindro de inserción: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
- Fije el mecanismo al asiento: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
- Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
- Adjuntar reposabrazos: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
- Adjuntar respaldo: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
- Apriete todos los tornillos: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
- Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.
Instrucciones de funcionamiento
Your Amazon Basics office chair offers several adjustable features for personalized comfort:
- Ajuste de altura del asiento: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
- Función de inclinación: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
- Ajuste de tensión de inclinación: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
- Giro de 360 grados: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
- Rolling Casters: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.
Mantenimiento
Para mantener la apariencia y longevidad de su silla:
- Limpieza: Limpiar con anuncioamp Paño. Evite productos químicos agresivos o limpiadores abrasivos que puedan dañar el cuero sintético.
- Sujetadores: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to prevent wobbling or instability.
- Ruedas: Mantenga las ruedas libres de residuos (cabello, polvo, etc.) para garantizar un rodaje suave.
Solución de problemas
Si tiene problemas con su silla, considere lo siguiente:
- La silla se siente inestable o tambaleante: Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
- Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
- Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
- Las ruedas no giran con suavidad: Inspeccione las ruedas para ver si tienen residuos atrapados (cabello, pelusa) y límpielas. Asegúrese de que estén completamente insertadas en la base.
Presupuesto
| Característica | Especificación |
|---|---|
| Dimensiones del producto (L x An x Al) | 24.2"D x 24"W x 38.8"H (61.5cmW × 61cmD × 88.5-98cmH) |
| Ancho del asiento | 20.1 pulgadas |
| Profundidad del asiento | 16.5 pulgadas |
| Altura interior del respaldo del asiento | 18.7 pulgadas |
| Capacidad de peso | 275 libras (124.74 kg) |
| Material | Faux Leather (Polyurethane bonded leather) |
| Material de relleno | Espuma |
| Estilo de espalda | Espalda sólida |
| Estilo de brazo | Apoyabrazos acolchados |
| Movimiento | 360-degree Swivel, Rolling Casters |
| Ajustes | Height-adjustable seat, Adjustable seat angle, Tilt control |
| Proceso de dar un título | Certificado por BIFMA |
| Número de modelo | GF-9390M-1 |
| Código Postal | 841710177909 |
Garantía y soporte
For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.
