1. Introducción
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Bartscher ROMA/II Pizza Oven Heating Element. Please read these instructions carefully before installation and retain them for future reference. This heating element is designed for use in Bartscher ROMA/II pizza ovens.
2. Instrucciones de seguridad
- Seguridad eléctrica: Installation and maintenance must be performed by a qualified electrician or authorized service technician. Disconnect the pizza oven from the main power supply before any installation, maintenance, or repair work.
- Peligro de calor: Heating elements become extremely hot during operation. Allow the element to cool completely before handling. Use appropriate personal protective equipment (e.g., heat-resistant gloves) if handling is necessary while warm.
- Aplicación correcta: This heating element is specifically designed for Bartscher ROMA/II pizza ovens. Do not use it for any other purpose or in incompatible appliances.
- Inspección de daños: Before installation, inspect the heating element for any signs of damage. Do not install a damaged element.
- Ventilación: Ensure adequate ventilation around the pizza oven as per the oven's original instruction manual.
3. Producto terminadoview
The Bartscher ROMA/II Pizza Oven Heating Element is a crucial component for maintaining the optimal temperature within your pizza oven. It features a robust design for reliable performance.
Características principales:
- Conexión: M4
- Connection Length: 15 mm
- Fixing Type: 2-hole
- Potencia: 800 W
- Volumentage: 230 V
Figure 1: Bartscher ROMA/II Pizza Oven Heating Element. This image shows the S-shaped tubular heating element with electrical connectors at each end.
Figure 2: Dimensional diagram of the heating element. The diagram illustrates the length (L) and width (B) of the S-shaped element, along with the threaded connectors.
4. Configuración e instalación
Importante: Installation must be carried out by a qualified professional to ensure safety and proper function.
- Desconexión de energía: Ensure the pizza oven is completely disconnected from the main power supply before beginning installation. Verify with a voltage probador.
- Access the Heating Element Compartment: Follow the specific instructions in your Bartscher ROMA/II pizza oven manual to safely access the heating element compartment. This may involve removing panels or covers.
- Remove Old Element (if applicable): Carefully disconnect the electrical wiring from the old heating element. Note the wiring configuration for correct re-connection. Unscrew or unfasten the old element from its mounting points.
- Instalar nuevo elemento: Position the new Bartscher ROMA/II heating element in the designated location. Secure it using the 2-hole fixing type. Ensure it is firmly seated and does not touch any other components.
- Conectar el cableado: Reconnect the electrical wiring to the M4 connectors on the new heating element. Ensure all connections are secure and correctly polarized according to the original wiring diagram of your pizza oven. The connection length is 15 mm.
- Asegurar y probar: Replace any removed panels or covers. Once fully assembled, reconnect the pizza oven to the main power supply and perform a functional test according to the oven's operating instructions. Monitor for proper heating and any unusual odors or sounds.
5. Instrucciones de funcionamiento
The Bartscher ROMA/II Heating Element operates as an integral part of your pizza oven. Its function is controlled by the oven's thermostat and control system. There are no direct user controls for the heating element itself.
- Refer to your Bartscher ROMA/II pizza oven's main instruction manual for detailed operating procedures, including temperature setting, preheating, and cooking guidelines.
- Ensure the oven door is properly closed during operation to maintain heat efficiency and prevent heat loss.
- Do not obstruct the heating element or place items directly on it.
6. Mantenimiento
Regular maintenance ensures the longevity and efficiency of your heating element and pizza oven.
- Limpieza: Always ensure the oven is switched off and completely cool before cleaning. Gently wipe the exterior of the heating element with a dry, soft cloth to remove any dust or debris. Do not use abrasive cleaners, harsh chemicals, or excessive moisture, as this can damage the element.
- Inspección: Periodically inspect the heating element for any signs of physical damage, corrosion, or discoloration. Check the electrical connections for tightness and signs of overheating. If any damage is observed, discontinue use and contact a qualified technician for replacement.
- Control profesional: It is recommended to have your pizza oven and its components, including the heating element, inspected by a qualified service technician annually.
7. Solución de problemas
If you experience issues with your pizza oven's heating, consider the following common troubleshooting steps. For complex issues, contact a qualified service technician.
- El horno no calienta:
- Check if the oven is properly plugged in and receiving power.
- Verify the circuit breaker or fuse for the oven has not tripped.
- Ensure the oven's thermostat is set correctly.
- If the element is visibly damaged or not glowing when power is applied (and it should be), it may need replacement.
- Calentamiento desigual:
- Ensure the oven is preheated sufficiently.
- Check for any obstructions around the heating element.
- A faulty thermostat or control board in the oven could also cause uneven heating.
- Olor a quemado:
- A new element may produce a slight burning smell initially as manufacturing residues burn off. This should dissipate quickly.
- If the smell persists or is accompanied by smoke, immediately disconnect power and inspect for foreign objects or electrical issues.
8. Especificaciones
| Atributo | Valor |
|---|---|
| Marca | bartscher |
| Modelo | ROMA/II |
| Referencia del fabricante | 4251391256361 |
| Fuerza | 800 W |
| Volumentage | 230 V |
| Tipo de conexión | M4 |
| Longitud de conexión | 15 milímetros |
| Tipo de fijación | 2 agujeros |
| Element Length (L) | 445 milímetros |
| Element Width (B) | 195 milímetros |
| Número de circuitos de calefacción | 1 |
| Hilo | 1/4" |
9. Garantía y soporte
Information regarding specific warranty terms for the Bartscher ROMA/II Pizza Oven Heating Element is not available in the provided product details. For warranty claims or technical support, please contact your retailer or Bartscher customer service directly, providing your model number (ROMA/II) and manufacturer reference (4251391256361).
La información sobre la disponibilidad de piezas de repuesto no está disponible actualmente.
