Fortinet FortiSwitch 224E Layer 2/3 Switch User Manual

1. Introducción

The Fortinet FortiSwitch 224E is a high-performance Layer 2/3 Ethernet switch designed to provide secure, scalable, and manageable network access. It is an integral component of the Fortinet Security Fabric, offering seamless integration and unified management through the FortiGate interface via FortiLink. This manual provides essential information for the proper installation, configuration, operation, and maintenance of your FortiSwitch 224E.

Please read this manual thoroughly before operating the device to ensure optimal performance and to prevent damage.

2. Producto terminadoview

2.1 Características principales

• Conmutación de capa 2/3: Supports advanced routing capabilities for enhanced network flexibility.
• 24 puertos GE RJ45: Provides high-density Gigabit Ethernet connectivity for various devices.
• 4 puertos SFP GE: Offers fiber connectivity for long-distance links and uplink aggregation.
• Compatibilidad del controlador de conmutador FortiGate: Enables seamless integration with FortiGate devices for centralized, unified management via FortiLink.
• Implementación versátil: Ideal for enterprise networks, branch offices, and data center environments.

2.2 Contenido del paquete

Verifique que su paquete contenga los siguientes elementos:

• FortiSwitch 224E Unit
• Cable(s) de alimentación de CA
• Kit de montaje en rack (soportes y tornillos)
• Guía de inicio rápido
• Hoja de información de seguridad

2.3 Panel frontal y posterior Views

Imagen 2.3.1: Delantera y trasera view of the FortiSwitch 224E. The front panel features 24 RJ45 ports, 4 SFP ports, and status LEDs. The rear panel includes the console port and dual AC power inputs.

Imagen 2.3.2: Detallado view of the FortiSwitch 224E front panel, showing the 24 Gigabit Ethernet RJ45 ports (labeled 1-24), 4 Gigabit Ethernet SFP ports (labeled 25/26 and 27/28), and various status indicators (Power, Alarm, MGMT, CONSOLE).

Imagen 2.3.3: Detallado view of the FortiSwitch 224E rear panel, featuring the RJ45 console port for local management and two AC power input receptacles (100-240Vac, 50-60Hz).

3. Información de seguridad

Tenga en cuenta las siguientes precauciones de seguridad para evitar lesiones y daños al dispositivo:

• Fuerza: Use only the power cord(s) supplied with the device or approved replacements. Ensure the power source voltage matches the device's requirements (100-240Vac, 50-60Hz).
• Toma de tierra: Siempre conecte el dispositivo a una toma de corriente con conexión a tierra.
• Ventilación: Ensure adequate airflow around the device. Do not block ventilation openings. Maintain proper clearance for air intake and exhaust.
• Ambiente: Operate the device within the specified temperature and humidity ranges (Operating: 0-50°C, 10-90% non-condensing humidity). Avoid direct sunlight, heat sources, and excessive moisture.
• Instalación: Install the device on a stable, level surface or securely mount it in a standard 19-inch equipment rack.
• Servicio: No intente reparar el dispositivo usted mismo. Consulte todo el servicio a personal calificado.

4. Configuración e instalación

4.1 Preparación del sitio

Before installation, ensure the installation site meets the environmental requirements outlined in the Safety Information and Specifications sections. Provide adequate space for cabling and ventilation.

4.2 Montaje del interruptor

The FortiSwitch 224E can be installed in a standard 19-inch equipment rack or placed on a desktop.

4.2.1 Montaje en bastidor

1. Attach the provided rack-mount brackets to the sides of the FortiSwitch using the included screws.
2. Align the brackets with the vertical rails of the equipment rack.
3. Secure the FortiSwitch to the rack using appropriate rack screws (not always included).

4.2.2 Ubicación del escritorio

If not rack-mounting, place the FortiSwitch on a flat, stable surface. Ensure there is sufficient space around the device for proper ventilation.

4.3 Conexión de la alimentación

1. Connect the supplied AC power cord(s) to the AC input receptacle(s) on the rear panel of the FortiSwitch.
2. Conecte el otro extremo del cable(s) de alimentación a una toma eléctrica con conexión a tierra.
3. The switch will power on automatically. Verify the Power LED on the front panel illuminates.

4.4 Initial Console Connection

For initial configuration or troubleshooting, connect to the console port:

1. Connect an RJ45-to-DB9 console cable (or USB-to-RJ45 adapter) from your management workstation to the CONSOLE port on the rear panel of the FortiSwitch.
2. Configure your terminal emulation software (e.g., PuTTY, Tera Term) with the following settings: Baud Rate: 9600, Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None.
3. Press Enter to access the command-line interface (CLI).

5. Operación

5.1 Conexión de dispositivos de red

5.1.1 puertos RJ45

Connect Ethernet cables from your network devices (e.g., computers, servers, access points) to the 24 GE RJ45 ports on the front panel. The corresponding Link/Activity LEDs will illuminate when a valid connection is established and blink during data transmission.

5.1.2 puertos SFP

Insert compatible Gigabit Ethernet SFP transceivers into the 4 GE SFP ports. Connect fiber optic cables from other network devices or uplinks to these transceivers. Ensure the correct fiber type (single-mode or multi-mode) is used for your transceivers and cables.

5.2 Administración y configuración

The FortiSwitch 224E can be managed through several methods:

• FortiLink Integration (Recommended): For unified management, connect the FortiSwitch to a FortiGate firewall. The FortiGate acts as a switch controller, allowing you to manage the switch directly from the FortiGate's GUI. Refer to the FortiGate documentation for detailed FortiLink setup.
• Interfaz de línea de comandos (CLI): Access the CLI via the console port (as described in Section 4.4) or via SSH/Telnet over the network (after initial configuration). The CLI provides full control over all switch features.
• WebGestión basada en: The FortiSwitch may offer a web-based graphical user interface (GUI) for configuration. Access it by entering the switch's IP address into a web navegador.

6. Mantenimiento

6.1 actualizaciones de firmware

Consulte periódicamente el soporte de Fortinet website for the latest firmware versions. Keeping your FortiSwitch firmware up-to-date ensures optimal performance, security, and access to new features. Follow the instructions provided with the firmware release notes for the update process.

6.2 Limpieza

Periodically clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners directly on the device. Ensure ventilation openings are free from dust and obstructions.

6.3 Monitoreo ambiental

Ensure the operating environment remains within the specified temperature and humidity ranges to prevent overheating and component damage.

7. Solución de problemas

7.1 Problemas de energía

• Sin LED de encendido: Check if the power cord is securely connected to both the switch and the power outlet. Verify the power outlet is functional. Try a different power cord.
• LED de alarma encendido: This indicates a system fault. Consult the Fortinet documentation or support for specific alarm codes and resolutions.

7.2 Problemas de conectividad

• LED de enlace/actividad del puerto apagado: Ensure the Ethernet or fiber cable is securely connected at both ends. Verify the connected device is powered on and functioning correctly. Check cable integrity.
• Sin acceso a la red: Verify IP configuration on the switch and connected devices. Check VLAN assignments if configured. Ensure FortiLink is properly established if managing via FortiGate.

7.3 Problemas de acceso a la consola

• No hay salida en la consola: Double-check the console cable connection. Verify the terminal emulation software settings (Baud Rate: 9600, Data Bits: 8, Parity: None, Stop Bits: 1, Flow Control: None). Try a different console cable or adapter.

8. Especificaciones

Imagen 8.1: Key performance and hardware specifications for the FortiSwitch 224E.

Imagen 8.2: Comprehensive hardware and environmental specifications for the FortiSwitch 224E, including comparisons with other models.

Imagen 8.3: Visual representation of the FortiSwitch 224E with its physical dimensions and weight.

9. Garantía y soporte

9.1 Garantía del producto

The FortiSwitch 224E comes with a Garantía limitada de por vida. For detailed terms and conditions of the warranty, please refer to the official Fortinet websitio o la documentación de garantía incluida con su producto.

9.2 Soporte técnico

For technical assistance, documentation, firmware downloads, and other support resources, please visit the official Fortinet support websitio:

https://support.fortinet.com

You may need to register your product to access full support services.