Daisy 901

Manual del usuario del kit de rifle de aire comprimido Daisy Powerline 901

Modelo: 901

Introducción

This manual provides essential information for the safe and effective operation, maintenance, and care of your Daisy Powerline 901 Air Rifle Kit. Please read this manual thoroughly before using the product.

Información importante de seguridad

ADVERTENCIA: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Always wear appropriate eye protection when handling or operating this air rifle.

Aviso legal: YOU MUST BE 18 YEARS OR OLDER TO BUY ANY AIR GUN OR AIR RIFLE IN OUR STORE. We do NOT and can NOT ship airguns or bb guns to New York City and its boroughs (Manhattan, Brooklyn, Bronx, Queens, Staten Island, these zip codes are: 100xx-104xx, 110xx, 112xx-114xx, 116xx), the city of Philadelphia, PA and Washington DC. Residents of Chicago, IL cannot buy CO2 powered rifles, pistols or revolvers directly from us. Residents of New Jersey can buy bb guns through a designated local gun store after acquiring an Airgun Permit.

Always treat every airgun as if it were loaded. Never point an airgun at anything you do not intend to shoot. Keep your finger off the trigger until ready to shoot. Be sure of your target and what is beyond it.

Contenido del paquete

Daisy Powerline 901 Air Rifle Kit including rifle, scope, safety glasses, BBs, pellets, and targets

Image: The Daisy Powerline 901 Air Rifle Kit, showing the black air rifle with an attached scope, yellow safety glasses, a tin of .177 caliber pellets, three containers of Daisy 350 count BBs, and two red ShatterBlast targets with black stakes.

Your Daisy Powerline 901 Air Rifle Kit includes the following components:

Configuración

1. Scope Installation

  1. Carefully unbox the 4x15 scope and mounting rings.
  2. Attach the scope rings to the dovetail rail on top of the rifle receiver. Ensure they are securely tightened but do not overtighten.
  3. Place the scope into the rings, ensuring the reticle is level. Secure the top halves of the rings.
  4. Adjust the scope's position for proper eye relief once mounted.

2. Configuración del objetivo

Instrucciones de funcionamiento

Loading BBs (Repeater Mode)

  1. Asegúrese de que el rifle esté apuntando hacia una dirección segura.
  2. Locate the BB loading port on the side of the rifle.
  3. Open the loading port and pour up to 50 BBs into the reservoir.
  4. Cierre el puerto de carga de forma segura.
  5. To load a BB into the chamber, pull the bolt handle fully to the rear and then push it forward until it locks.

Loading Pellets (Single Shot)

  1. Asegúrese de que el rifle esté apuntando hacia una dirección segura.
  2. Pull the bolt handle fully to the rear.
  3. Carefully insert one .177 caliber pellet into the breech, ensuring the skirt of the pellet is facing the rear.
  4. Push the bolt handle forward until it locks, seating the pellet.

Pumping the Rifle

  1. With the rifle pointed in a safe direction, grasp the forearm pump handle.
  2. Pump the handle fully open and then fully closed. Repeat this action for 3 to 10 pumps. More pumps result in higher velocity. Do not exceed 10 pumps.

Firing the Rifle

  1. Ensure the safety is engaged (ON).
  2. Aim at your target, ensuring a clear backstop.
  3. Disengage the safety (OFF).
  4. Coloque el dedo en el gatillo y apriételo lentamente para disparar.

Mantenimiento

Solución de problemas

ProblemaPosible causaSolución
BBs/Pellets not loading or jammingImproper loading, bent pellets, or residue in breech.Ensure bolt is fully cycled. Use unbent pellets. Clean breech area.
Low velocity or inconsistent shotsInsufficient pumps, worn seals, or dirty barrel.Ensure 3-10 full pumps. Inspect for air leaks. Clean barrel.
Scope not holding zero or inaccurateLoose scope rings, faulty scope, or bent barrel.Tighten scope rings. If issues persist, consider replacing the scope or contacting support for barrel inspection.
Charging handle difficult to operateLack of lubrication or internal obstruction.Apply silicone lubricant to the charging handle and bolt mechanism. Check for any foreign objects.

Presupuesto

Información de garantía

The Daisy Powerline 901 Air Rifle Kit comes with a Garantía limitada de un año. For warranty claims or service, please retain your proof of purchase and contact Daisy customer support. This warranty covers manufacturing defects and workmanship under normal use.

Atención al cliente

For further assistance, technical support, or to inquire about replacement parts, please visit the official Daisy Outdoor Products website or contact their customer service department. Always refer to your product model number (901) when seeking support.

Daisy Outdoor Products Official Websitio: www.daisy.com

Documentos relacionados - 901

Preview Ръководство за POS Manager: Настройки и Функции
Подробно ръководство за работа със софтуера POS Manager, обхващащо настройки, конфигурация на фискално устройство, управление на артикули, оператори, плащания, данъци и отчети.
Preview Protocolo de comunicación entre empresas físicas y ordenadores personales
Este documento describe el protocolo de comunicación de los usuarios físicos (ФУ) y los ordenadores personales (PC), previos a la instalación. información sobre el comando, la información y la información sobre el servicio.
Preview AIS sobre WiFi con módulo DT-06: Guía de integración de dAISy 2+
Aprenda a conectar el módulo WiFi DT-06 a su receptor AIS dAISy 2+ para transmitir de forma inalámbrica datos AIS a aplicaciones de navegación como OpenCPN y Navionics en dispositivos móviles y computadoras.
Preview Daisy H1000R 2D Wireless Barcode Scanner - High Performance & Versatile
Discover the Daisy H1000R, a high-performance 2D wireless barcode scanner. Featuring plug-and-play setup, 2000mAh battery, and compatibility with 1D/2D codes on screen and paper. Ideal for business, payment, and healthcare applications.
Preview Daisy 2D USB Scanner User Manual
Comprehensive user manual for the Daisy 2D USB Scanner, detailing setup, configuration, communication interfaces, reading modes, data editing, and code system settings for efficient barcode scanning.
Preview Daisy 2D Barcode Scanner User Manual: Configuration and Operation Guide
This user manual provides comprehensive instructions and configuration details for the Daisy 2D Barcode Scanner, covering output settings, system configurations, data editing, and barcode parameter adjustments.