Blackvue DR750S-2CH

Manual del usuario de la cámara para salpicadero de doble canal BlackVue DR750S-2CH

Brand: BlackVue | Model: DR750S-2CH

1. Introducción

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BlackVue DR750S-2CH dual channel dashcam. The DR750S-2CH is a high-performance car DVR recorder featuring Full HD 1080p recording for both front and rear cameras, built-in Wi-Fi, Cloud connectivity, G-Sensor, and GPS. It supports up to 128GB microSD cards for reliable loop recording and intelligent parking mode surveillance.

2. Producto terminadoview

Características principales:

Componentes:

The BlackVue DR750S-2CH package includes the main front camera unit, a rear camera, a 16GB microSD card, and necessary cables for installation and power. Additional components may include mounting accessories and a pry tool for cable management.

BlackVue DR750S-2CH Front and Rear Dashcam

Figura 1: BlackVue DR750S-2CH Front and Rear Dashcam units. The front camera is a cylindrical unit with a lens, while the smaller rear camera is also cylindrical and connects to the front unit.

3. Configuración

3.1. Preparaciones iniciales

  1. Insertar tarjeta MicroSD: Locate the microSD card slot on the main front camera unit. Gently insert the provided 16GB microSD card until it clicks into place.
  2. Retire las películas protectoras: Carefully remove any protective films from the front and rear camera lenses.

3.2. Instalación de la cámara frontal

  1. Elija la ubicación de montaje: Select a flat, clear area on your front windshield, typically behind the rearview espejo, asegurándose de que no obstruya su view.
  2. Parabrisas limpio: Thoroughly clean the chosen area on the windshield to ensure proper adhesion.
  3. Apply Electrostatic Sticker (Optional but Recommended): If provided, apply an electrostatic sticker to the cleaned area. This helps with easier removal and repositioning of the dashcam mount. Press outwards from the center to remove air bubbles.
  4. Attach Mount Bracket: Slide the mount bracket onto the front camera unit. Remove the adhesive backing from the mount bracket.
  5. Montaje de la cámara frontal: Align the dashcam with the electrostatic sticker (if used) or directly onto the cleaned windshield. Press firmly and hold for several seconds to ensure a secure bond.

3.3. Conexión de alimentación

  1. Conecte el cable de alimentación: Plug the mini USB connector of the power cable into the dashcam's power socket.
  2. Cable de alimentación de ruta: Neatly route the power cable along the windshield edge and down the A-pillar to your vehicle's power outlet. Ensure the cable does not interfere with airbag deployment. If unsure, consult a professional.
  3. Conectar a la toma de corriente:
    • Puerto USB-A: If your vehicle has a USB-A port (5V, 2A or higher recommended), plug the USB end of the power cable directly into it.
    • Toma de encendedor de cigarrillos: If using the cigarette lighter socket, insert the USB end of the power cable into the supplied car charger adapter, then plug the adapter into your vehicle's cigarette lighter outlet.
  4. Potencia de prueba: Activate your vehicle's ignition. The dashcam should power on.
  5. Formatear tarjeta MicroSD: If prompted on the dashcam screen, format the microSD card by pressing the designated button (refer to on-screen instructions or the quick start guide).

3.4. Instalación de la cámara trasera

  1. Elija la ubicación de montaje: Select a flat, clear area at the top center of your rear windshield.
  2. Parabrisas limpio: Limpie completamente el área elegida.
  3. Apply Electrostatic Sticker (Optional): Apply an electrostatic sticker to the cleaned area, ensuring it does not cover the lens area. Press outwards from the center to remove air bubbles.
  4. Retire las películas protectoras: Remove the protective film from the rear camera lens and the adhesive cover from its mount.
  5. Montaje de la cámara trasera: Align the rear camera so the "BlackVue" logo is oriented upright when viewed from inside your vehicle. Secure the mount bracket in this position, then firmly attach the rear camera onto the electrostatic sticker (if used) or directly onto the cleaned windshield.
  6. Conectar el cable de la cámara trasera: Run the rear camera cable from the front camera along the headliner and through the C-pillar or side trim for a clean, concealed look. Plug the cable securely into the rear camera port on the front unit.
  7. Adjust Rear Camera Angle: Switch your front camera's display to rear view mode. Tilt the rear camera up or down until it captures a clear, straight view detrás de su vehículo.

3.5. BlackVue App Connection

To unlock the full potential of your BlackVue DR750S-2CH, download the BlackVue App from your device's app store (iOS/Android). Follow the in-app instructions to connect your smartphone to the dashcam's Wi-Fi hotspot. The default password is 12345678. Ensure any VPN is disabled before connecting.

Vídeo 1: Unboxing and initial setup of a BlackVue DR series dashcam, demonstrating component identification and basic preparation steps.

4. Instrucciones de funcionamiento

4.1. Funcionamiento básico

4.2. Modo de estacionamiento

The intelligent parking mode provides surveillance when your vehicle is parked. It utilizes impact detection and motion detection to record events. The dashcam consumes low power in parking mode to extend surveillance time.

Vídeo 2: A short demonstration of BlackVue's parking mode protection features, highlighting low current draw and pre-impact recording.

4.3. Wi-Fi and Cloud Features

Vídeo 3: Demonstration of HDR clarity in a BlackVue dashcam, showcasing improved video quality in challenging lighting conditions.

5. Mantenimiento

6. Solución de problemas

Vídeo 4: A short video demonstrating the temperature detection system in a BlackVue dashcam, showing its operational range in varying climates.

7. Especificaciones

CaracterísticaDetalle
Nombre del modeloDR750S-2CH
Canales de grabación2 (delantero y trasero)
Resolución de la cámara frontalFull HD 1080p @ 60fps
Resolución de la cámara traseraFull HD 1080p @ 30fps
Sensor de imagenSensor SONY STARVIS CMOS
Viewing Angle (Front)Diagonal 139 °, Horizontal 116 °, Vertical 61 °
Viewing Angle (Rear)Diagonal 139 °, Horizontal 116 °, Vertical 61 °
WifiBuilt-in (802.11n (2.4 – 2.4835 GHz))
GPSIncorporado
Sensor GIncorporado
Compatibilidad con tarjetas MicroSDHasta 128 GB (16 GB incluidos)
Temperatura de funcionamiento-20 °C a 70 °C (-4 °F a 158 °F)
Corte por alta temperaturaAprox. 80 °C (176 °F)
Dimensiones del producto4.53 x 1.38 x 1.38 pulgadas
Peso del artículo11.2 onzas
ColorNegro

8. Garantía y soporte

For warranty information, detailed support, and additional resources, please visit the official BlackVue website or contact BlackVue customer support. You can also visit the BlackVue Store on Amazon para actualizaciones de productos y accesorios.

Documentos relacionados - DR750S-2CH

Preview Manual de usuario de la cámara para salpicadero BlackVue DR750S-2CH | Instalación, configuración y solución de problemas
Manual de usuario completo para la cámara de salpicadero BlackVue DR750S-2CH, que abarca la instalación, configuración, gestión de vídeo, funciones en la nube y solución de problemas. Aprenda a utilizar su cámara de salpicadero eficazmente.
Preview Caja BlackVue DR770X: Guía de configuración, conectividad en la nube y uso
Guía completa para configurar y usar la cámara para tablero BlackVue DR770X Box Series, que incluye integración de aplicaciones, conectividad en la nube a través de un punto de acceso Wi-Fi o una tarjeta SIM, y viewo software.
Preview BlackVue DR970X Box-2CH Plus Series: Manual del usuario y guía de instalación
Guía completa de la cámara para coche BlackVue DR970X Box-2CH Plus Series, que abarca características, instalación, uso del software, especificaciones y mantenimiento. Aprenda a descargar vídeos y a utilizarla. Web Viewy optimizar el rendimiento.
Preview Guía de instalación y usuario de BlackVue DR970X Box-2CH Plus Series
Una guía completa para instalar y usar la cámara para tablero BlackVue DR970X Box-2CH Plus Series, que incluye la configuración de la cámara trasera, la instalación del módulo GNSS, la instalación del módulo de conectividad, las opciones de cable de alimentación y el uso de la aplicación.
Preview Guía de inicio rápido de BlackVue DR970X Box-2CH Plus y DR970X Box-2CH IR Plus
This Quick Start Guide provides essential information for installing and using the BlackVue DR970X Box-2CH Plus and DR970X Box-2CH IR Plus dashcam systems. It covers safety precautions, compliance information, package contents, component identification, and installation steps for the main unit and cameras.
Preview Cómo formatear la tarjeta SD para la cámara de salpicadero BlackVue DR650GW-2CH
Guía paso a paso para formatear la tarjeta SD de la dashcam BlackVue DR650GW-2CH con la aplicación de Windows. Incluye instrucciones para la instalación del software y el formateo de la tarjeta.