Introducción
Thank you for choosing the ClearClick Retro AM/FM Radio with Bluetooth. This classic wooden vintage-style speaker combines nostalgic aesthetics with modern functionality, allowing you to enjoy both traditional radio broadcasts and contemporary digital audio. This manual provides essential information for setting up, operating, and maintaining your new radio.
Producto terminadoview
Figura 1: Frente view of the ClearClick Retro AM/FM Radio, showcasing its classic wooden design and central tuning dial.
Figure 2: Close-up of the tuning dial and control knobs for FM/AM/BT selection and volume.
The ClearClick Retro Radio features a beautiful, handmade wooden exterior, an easy-to-use tuning dial, and dedicated knobs for mode selection and volume control. It is designed to be powered by a standard North American power plug.
Configuración
- Desembalaje: Carefully remove the radio from its packaging. Ensure all components, including the power cord, are present.
- Colocación: Place the radio on a stable, flat surface away from direct sunlight, heat sources, and excessive moisture.
- Conexión de energía: Insert the included power cord into the AC input on the back of the radio. Plug the other end into a standard North American wall outlet (120V AC, 60Hz).
- Configuración de la antena: For optimal FM reception, extend the built-in wire antenna fully. For AM reception, the radio utilizes an internal antenna; repositioning the radio may improve signal strength.
Instrucciones de funcionamiento
Encendido / apagado y control de volumen
- To power on the radio, rotate the right-side VOLUMEN knob clockwise until you hear a click.
- Para ajustar el volumen, continúe girando el VOLUMEN perilla.
- Para apagar, gire el VOLUMEN Gire la perilla en sentido contrario a las agujas del reloj hasta que haga clic.
Operación de radio AM / FM
- Rotate the left-side FM AM BT knob to select either FM or AM modo.
- Girar la central SINTONIZACIÓN knob to scan for radio stations. The tuning backlight will illuminate in AM/FM mode.
- Ajustar el SINTONIZACIÓN knob carefully for clear reception.
Funcionamiento de Bluetooth
- Rotate the left-side FM AM BT perilla para seleccionar BT mode. The radio will enter Bluetooth pairing mode, indicated by a blue LED.
- En su dispositivo con Bluetooth habilitado (por ejemplo, teléfono inteligente, tableta), busque dispositivos Bluetooth disponibles.
- Select "Vintage Radio" or "ClearClick Radio" from the list to pair.
- Once paired, the blue LED will remain solid, and you can play audio from your device through the radio.
- The radio's tuning backlight stays on even in Bluetooth mode (NEW 2019 feature).
Mantenimiento
- Limpieza: Use a soft, dry cloth to wipe the exterior of the radio. Do not use abrasive cleaners or solvents, as they may damage the wooden finish.
- Almacenamiento: When not in use for extended periods, store the radio in a cool, dry place, away from extreme temperatures and humidity.
- Ventilación: Ensure the radio has adequate ventilation to prevent overheating. Do not block the ventilation holes on the back.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sin poder | Cable de alimentación no conectado; toma de corriente no activa. | Ensure power cord is securely plugged into the radio and a working wall outlet. Check if the volume knob is turned on. |
| Mala recepción de radio | Señal débil; antena no extendida. | Fully extend the FM wire antenna. For AM, try repositioning the radio. Adjust the tuning knob slowly. |
| El Bluetooth no se conecta | Radio not in BT mode; device too far; device already paired. | Ensure radio is in BT mode. Move your device closer to the radio. Unpair "Vintage Radio" from your device's Bluetooth settings and try pairing again. |
| No hay sonido de Bluetooth | Volume too low on radio or device. | Increase volume on both the radio and your connected Bluetooth device. |
Presupuesto
- Dimensiones del producto: 10.5" (alto) x 8" (ancho) x 6" (profundidad)
- Peso del artículo: 4.74 libras
- Tecnología de conectividad: Bluetooth
- Tecnología de sintonizador: AM, FM (2 bandas)
- Fuente de energía: Corded Electric (Standard North American Power Plug)
- Componentes incluidos: Cable de alimentación
- Nivel de resistencia al agua: No resistente al agua
- Tecnología de visualización: LCD (for tuning dial backlight)
Figura 3: Lado view illustrating the dimensions of the radio.
Garantía y soporte
The ClearClick Retro AM/FM Radio with Bluetooth comes with a Garantía completa de 5 año. ClearClick is a USA-Based Small Business committed to providing excellent customer support.
For warranty claims or technical assistance, please refer to the contact information provided with your product packaging or visit the official ClearClick webSitio. Conserve su recibo de compra para validar la garantía.
Información importante de seguridad
Please read and follow all safety instructions provided in the original product packaging. Do not expose the unit to rain or moisture. Do not disassemble the unit; refer all servicing to qualified personnel. Ensure proper ventilation to prevent overheating.