Monitor Desk Mount Stand User Manual

1. Producto terminadoview

The Klip xtreme KPM-310 Dual Monitor Desk Mount Stand is designed to optimize your workspace by securely holding two monitors, freeing up valuable desk space. This robust mount promotes an ergonomic viewing experience with its extensive adjustability.

Constructed from high-grade steel, the KPM-310 supports two screens, each up to 32 inches in size and weighing up to 17.6 lbs. It features a sturdy desktop C-clamp base for stability and a fully articulating mechanism allowing for tilt, swivel, and rotation adjustments. Integrated cable management clips help maintain a tidy setup, and a tool holder ensures the hexagonal key is always accessible for quick adjustments.

Figura 1: The Klip xtreme KPM-310 Dual Monitor Desk Mount Stand, showing its C-clamp base and two articulating arms designed to hold monitors.

2. Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación. Si alguna pieza falta o está dañada, comuníquese con atención al cliente.

• Main Pole with C-Clamp Base
• Dual Articulating Arms
• Placas de montaje VESA (2x)
• Kit de hardware (tornillos, arandelas, espaciadores)
• Hexagonal Key (for adjustments)
• Clips de gestión de cables

Figura 2: Frente view of the assembled monitor mount, illustrating the main pole, dual arms, and VESA plates.

3. Configuración e instalación

Follow these steps to properly install your monitor desk mount.

3.1. Attaching the C-Clamp Base to Your Desk

1. Place the main pole with the integrated C-clamp base onto the edge of your desk.
2. Apriete el C-clamp screw securely until the mount is firmly attached to the desk surface. Ensure the desk surface is stable and can support the weight of the mount and two monitors.

3.2. Assembling the Articulating Arms

1. Slide the articulating arms onto the main pole at your desired height.
2. Secure the arms in place using the provided locking mechanism or screws.

Figura 3: De arriba hacia abajo view of the monitor mount, showing the full extension of the articulating arms and the central pole.

3.3. Attaching Monitors to VESA Plates

1. Remove the VESA mounting plates from the articulating arms by loosening the securing screws.
2. Align the VESA plate with the mounting holes on the back of your monitor (compatible with VESA 75x75mm or 100x100mm patterns).
3. Fije la placa VESA al monitor con los tornillos correspondientes del kit de tornillería. No apriete demasiado.
4. Carefully slide the monitor with the attached VESA plate back onto the articulating arm.
5. Secure the VESA plate to the arm using the securing screws.
6. Repita este procedimiento para el segundo monitor.

Figura 4: De cerca view of a VESA mounting plate attached to an articulating arm, illustrating the connection point for a monitor.

4. Operación y ajustes

The KPM-310 offers a range of adjustments to achieve optimal viewángulos de inclinación y posicionamiento ergonómico.

• Ajuste de altura: Loosen the collar on the main pole to slide the arms up or down. Retighten to secure.
• Ajuste de inclinación: The monitor can be tilted +45° to -45° (90° total range) to reduce glare and optimize viewing angle. Use the hexagonal key to adjust the tension at the tilt joint if needed.
• Ajuste giratorio: Each arm can swivel +90° to -90° (180° total range) at the pole and at the monitor connection point, allowing you to position monitors side-by-side or at an angle.
• Ajuste de rotación: Monitors can be rotated 360° (+180° to -180°) from landscape to portrait orientation without removing the screen.
• Ajuste de tensión: All joints can be tightened or loosened individually using the hexagonal key to control the fluidity or rigidity of movement.

After making adjustments, ensure all connections are secure to prevent monitors from shifting.

5. Mantenimiento

Regular maintenance ensures the longevity and proper function of your monitor mount.

• Limpieza: Limpie el soporte con un paño suave.amp paño. Evite limpiadores abrasivos o disolventes que puedan dañar el acabado.
• Comprobación de estanqueidad: Periodically check all screws and connections, especially the C-clamp and VESA plate screws, to ensure they remain tight and secure.
• Lubricación: No lubrication is typically required for the joints. If movement becomes stiff, check for debris or overtightened screws.

6. Solución de problemas

If you encounter issues with your monitor mount, refer to the following common problems and solutions:

• Los monitores se caen o no mantienen su posición:
  • Asegúrese de que el C-clamp está firmemente apretado al escritorio.
  • Use the hexagonal key to tighten the tension screws at the articulating joints and VESA plate connection points.
  • Verify that the monitor weight does not exceed the maximum load capacity of 17.6 lbs per arm.
• El monte se siente inestable:
  • Confirm the C-clamp is fully tightened and the desk surface is sturdy.
  • Ensure the main pole is properly seated in the base.
• Dificultad para ajustar la inclinación/giro/rotación:
  • Loosen the tension screws at the respective joints slightly using the hexagonal key.
  • Asegúrese de que no haya cables que obstruyan el movimiento.

7. Especificaciones

8. Garantía y soporte

The Klip xtreme KPM-310 Monitor Desk Mount Stand comes with a Garantía de por vida, garantizando tranquilidad respecto a su calidad y durabilidad.

For technical support, warranty claims, or inquiries about missing parts, please contact Klip xtreme customer service. Refer to the official Klip xtreme websitio para información de contacto.