Introducción
Welcome to your Viper 3306V Car Alarm System. This manual provides essential information for the proper installation, operation, and maintenance of your new vehicle security system. The Viper 3306V offers advanced protection for your vehicle, featuring a 3-channel anti-assault system and two-way communication capabilities to enhance your vehicle's safety.
Please read this manual thoroughly before attempting any installation or operation to ensure optimal performance and to avoid potential damage or misuse.
Información de seguridad
- Instalación profesional recomendada: For proper functionality and to prevent damage to your vehicle's electrical system, installation by a certified professional is highly recommended.
- Desconecte la batería del vehículo: Always disconnect the vehicle's negative battery terminal before beginning any installation work to prevent electrical shorts or damage.
- evitar tampriendo: Do not attempt to modify or disassemble the alarm system components. This may void your warranty and could lead to system malfunction.
- Cableado seguro: Ensure all wiring is properly routed, secured, and insulated to prevent chafing, short circuits, and interference with vehicle operations.
- Colocación de la sirena: Mount the siren in a location that is protected from water and heat, and where its sound is not obstructed.
Contenido del paquete
Verify that all components are present in your Viper 3306V Car Alarm System package:
- Viper 3306V Main Control Unit
- Dos (2) controles remotos
- Sirena
- Sensor de impacto
- Cableando arneses
- Manual de usuario (este documento)
Image: Viper 3306V Car Alarm System components. This image displays the main control unit, two remote controls, the siren, and a sensor, which are typically included in the package.
Configuración e instalación
The installation of the Viper 3306V Car Alarm System requires knowledge of automotive electrical systems. It is strongly recommended that this system be installed by an authorized Viper dealer or a qualified automotive electronics technician.
Pasos generales de instalación (para referencia profesional):
- Monte la unidad principal: Secure the main control unit in a hidden, dry location within the vehicle, away from excessive heat or moisture.
- Conecte la alimentación y la tierra: Connect the main power and ground wires according to the detailed wiring diagram provided with the installation guide (typically separate from this user manual).
- Instalar Siren: Mount the siren in the engine compartment, facing downwards to prevent water accumulation, and away from moving parts or extreme heat.
- Instalar sensor: Mount the shock sensor securely to a solid surface inside the vehicle. Adjust sensitivity as needed after installation.
- Connect Vehicle Inputs/Outputs: Connect the alarm system's input and output wires to the vehicle's door triggers, ignition, parking lights, and other relevant circuits as per the installation guide.
- Controles remotos del programa: Follow the programming instructions to link the remote controls to the main unit.
- Sistema de prueba: Thoroughly test all functions of the alarm system, including arming, disarming, sensor triggers, and anti-assault features.
Instrucciones de funcionamiento
Your Viper 3306V system is designed for intuitive operation using the provided remote controls.
Armando el sistema:
- Presione el CERRAR button on your remote control. The system will chirp once, and the parking lights will flash once, indicating the system is armed. The doors will lock (if connected).
- The two-way remote will confirm the armed status.
Desarmar el sistema:
- Presione el DESCUBRIR button on your remote control. The system will chirp twice, and the parking lights will flash twice, indicating the system is disarmed. The doors will unlock (if connected).
- The two-way remote will confirm the disarmed status.
Anti-Assault (SRV) Feature:
The anti-assault feature provides an additional layer of security. Consult your installer for specific activation and deactivation procedures, as this feature may be configured differently based on your preferences.
- Typically, this feature can be activated manually or automatically under certain conditions (e.g., ignition on, door opened).
- When activated, the system may trigger the siren and flash the lights to deter an assailant.
Modo pánico:
- To activate panic mode, press and hold the CERRAR or DESCUBRIR button (or a dedicated panic button if configured) for approximately 3 seconds. The siren will sound, and the parking lights will flash.
- To deactivate panic mode, press any button on the remote control.
Mantenimiento
- Baterías de control remoto: The remote controls are powered by non-standard batteries. When the remote's range decreases or its display (for two-way remotes) becomes dim, it is time to replace the batteries. Refer to the remote's specific instructions for battery replacement.
- Limpieza del sensor: Keep the shock sensor and any other external sensors (if installed) clean and free from debris to ensure accurate detection.
- Comprobaciones del sistema: Periodically test your alarm system by arming it and then gently shaking the vehicle or opening a door to ensure the siren activates.
- Evite la exposición al agua: Keep the main unit and remote controls away from water or excessive moisture.
Solución de problemas
If you experience issues with your Viper 3306V system, consider the following common troubleshooting steps:
- El sistema no se arma/desarma:
- Compruebe la batería del control remoto.
- Ensure you are within the remote's operating range.
- Verify all doors, hood, and trunk are closed properly.
- Alarmas falsas:
- The shock sensor sensitivity may be set too high. Consult your installer for adjustment.
- Check for loose items inside the vehicle that could trigger the sensor.
- Ensure the vehicle is parked in a stable location, away from heavy vibrations.
- La sirena no suena:
- Check the siren's wiring connections.
- Ensure the siren is not obstructed or damaged.
- El control remoto no responde:
- Reemplace la batería del control remoto.
- If the remote was dropped or damaged, it might need replacement or re-programming.
For persistent issues or complex problems, it is recommended to contact an authorized Viper dealer or a professional automotive electronics technician.
Presupuesto
| Número de modelo | 3306 V |
| Dimensiones (L x An x Al) | 38 x 29 x 33 cm (14.96 x 11.42 x 12.99 pulgadas) |
| Peso | 800 g (1.76 libras) |
| Fuente de poder | Vehicle battery (main unit), 2 non-standard batteries (remote controls) |
| Características | 3-channel anti-assault SRV, 2-way communication |
| Fabricante | Directed Electronics, Inc. |
Garantía y soporte
Your Viper 3306V Car Alarm System is covered by a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
For technical assistance, installation questions, or warranty service, please contact your authorized Viper dealer or visit the official Viper webSitio para recursos de soporte e información de contacto.
