1. Introducción
This manual provides essential information for the safe installation, operation, and maintenance of your Luceco EBER10S40 LED Outdoor Round Bulkhead Light. Please read these instructions carefully before installation and retain them for future reference.
The Luceco EBER10S40 is a 10W LED bulkhead light designed for both indoor and outdoor applications. It features a durable polycarbonate construction, an IP54 weather resistance rating, and provides 700 lumens of 4000K neutral white light. The product includes interchangeable black and white bezels to suit various aesthetic preferences.
Figure 1: The Luceco EBER10S40 LED bulkhead light, showcasing its modern design and neutral white light output.
2. Información de seguridad
Para su seguridad, siga siempre estas precauciones:
- La instalación debe ser realizada por un electricista calificado de acuerdo con las regulaciones nacionales de cableado.
- Ensure the main power supply is switched off at the consumer unit/fuse box before commencing installation or maintenance.
- Do not connect this fitting to an unearthed circuit.
- No sumerja el producto en agua.
- This product is designed for permanent connection to fixed wiring.
- No intente modificar el producto.
- Mantenga los materiales de embalaje fuera del alcance de los niños.
3. Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- 1 x Luceco EBER10S40 LED Bulkhead Light Fixture
- 1 x Black Bezel (pre-installed or separate)
- 1 x White Bezel (interchangeable option)
- Tornillos de fijación y tacos de pared
- Manual de instrucciones
Figure 2: The interchangeable black and white bezels included with the light fixture.
4. Configuración e instalación
The Luceco EBER10S40 is suitable for both wall and ceiling mounting. Follow these steps for installation:
- Preparación: Ensure the electricity supply is completely isolated at the main fuse board.
- Ubicación de montaje: Choose a suitable mounting location on a wall or ceiling, ensuring the surface is flat and capable of supporting the fixture's weight.
- Quitar bisel: Gently twist and remove the outer bezel (if pre-installed) to access the mounting holes and wiring terminals.
- Marcado y perforación: Place the light fixture base against the chosen surface and mark the positions for the fixing screws. Drill appropriate holes and insert wall plugs if necessary.
- Alambrado: Connect the mains supply cables to the inline terminals within the fixture. Ensure correct polarity: Live (L), Neutral (N), and Earth (E). Double-check all connections for security.
- Accesorio seguro: Mount the fixture base to the wall or ceiling using the provided fixing screws. Ensure it is securely fastened.
- Attach Bezel: Select either the black or white bezel. Align it with the fixture and twist it into place until it is securely seated.
- Restaurar energía: Once installation is complete and all connections are secure, restore the electricity supply.
Figure 3: The Luceco EBER10S40 light installed on a brick wall, illustrating its suitability for various mounting surfaces.
Figure 4: The Luceco EBER10S40 light fixture seamlessly integrated into an exterior brick wall.
5. Instrucciones de funcionamiento
The Luceco EBER10S40 LED bulkhead light operates via a standard wall switch. Once installed and connected to the mains power supply, simply toggle the connected light switch to turn the light on or off.
Figure 5: The Luceco EBER10S40 light providing illumination in an outdoor setting at night.
6. Mantenimiento
This LED bulkhead light requires minimal maintenance.
- Limpieza: To clean the fixture, ensure the power is off. Wipe the surface with a soft, damp Paño. No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar el acabado.
- Lamp Reemplazo: The LED light source in this luminaire is not replaceable by the user. When the light source reaches its end of life, the entire luminaire should be replaced.
- Inspección: Periodically inspect the fixture for any signs of damage or wear. If damage is observed, disconnect power and consult a qualified electrician.
7. Solución de problemas
If you encounter issues with your Luceco EBER10S40 light, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No power supply. Faulty wiring connection. Faulty switch. | Check the circuit breaker/fuse. Verify all wiring connections are secure. Test the switch. If issues persist, consult a qualified electrician. |
| La luz es tenue o parpadea. | Unstable power supply. Loose wiring connection. | Ensure stable power supply. Check and secure all wiring connections. If issues persist, consult a qualified electrician. |
| Water ingress inside the fixture. | Instalación incorrecta o sello dañado. | Immediately disconnect power. Inspect the installation for proper sealing and ensure the bezel is correctly fitted. If damage is present, the fixture may need replacement. |
For problems not listed here, or if the suggested solutions do not resolve the issue, please contact Luceco customer support.
8. Especificaciones
Detailed technical specifications for the Luceco EBER10S40 LED Outdoor Round Bulkhead Light:
| Característica | Especificación |
|---|---|
| Marca | Luceco |
| Número de modelo | EBER10S40-01 |
| Dimensiones del producto (L x An x Al) | 21.8 x 8.5 x 21.8 cm |
| Peso del artículo | 443 gramos |
| Material | Policarbonato (PC) |
| Clasificación IP | IP54 |
| Quétage | 10 vatios |
| Flujo luminoso | 700 lúmenes |
| Temperatura de color | 4000 Kelvin (blanco neutro) |
| Índice de reproducción cromática (IRC) | 80 |
| Volumentage | 240 voltios |
| Estilo | Moderno |
| Tipo de montaje | Wall Mount (also suitable for ceiling) |
| Clasificación de eficiencia energética | E |
Figure 6: The durable, weatherproof housing of the Luceco EBER10S40, rated IP54.
9. Garantía y soporte
Luceco provides a Garantía del fabricante de 3 años Para este producto, cubre defectos de materiales y mano de obra en condiciones normales de uso. Conserve su comprobante de compra para reclamaciones de garantía.
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Luceco customer support through their official websitio o el minorista al que se compró el producto.
