Introducción
This manual provides essential information for the safe installation, operation, and maintenance of your Warehouse of Tiffany Bopelo Faux Wood Grain Metal 3-Light Semi-Flush Ceiling LampLea este manual detenidamente antes de la instalación y consérvelo para futuras consultas.
The Bopelo semi-flush ceiling lamp features a strong, caged metal bowl with a realistic faux wood grain finish, designed to add character to various indoor settings such as dining rooms, entryways, or industrial spaces.
Información de seguridad
ADVERTENCIA: RIESGO DE DESCARGA ELÉCTRICA. Desconecte la alimentación del disyuntor o de la caja de fusibles antes de realizar cualquier instalación o mantenimiento.
This fixture must be hard-wired. Professional installation is recommended to ensure proper wiring and safety.
Asegúrese de que todas las conexiones eléctricas cumplan con los códigos y ordenanzas locales, así como con el Código Eléctrico Nacional (NEC).
No exceda el máximo de agua.tage especificado para las bombillas.
Always handle glass components with care.
Mantenga los materiales inflamables alejados del lamp cuando está en funcionamiento.
Contenido del paquete
Carefully unpack your fixture and check that all parts are included. If any parts are missing or damaged, do not attempt to assemble or install the fixture.
- Conjunto de accesorios (1)
- Pantalla metálica (1)
- Installation Wiring (Pre-attached)
- Manual de instrucciones (este documento)
- Mounting Hardware (Screws, wire nuts, mounting plate)
Note: Three (3) 60-watt E12 light bulbs are NOT included and must be purchased separately.
Configuración e instalación
Herramientas necesarias: Destornillador Phillips, destornillador de cabeza plana, pelacables, cinta aislante, escalera, gafas de seguridad.
- Apagar la energía: Locate the circuit breaker or fuse box that controls the power to the light fixture location. Turn off the main power supply to prevent electric shock. Verify power is off using a voltage probador.
- Preparar el montaje: Remove the old fixture if applicable. Attach the mounting plate to the junction box in the ceiling using the provided screws. Ensure the plate is securely fastened.
- Conexiones de cable: Carefully connect the fixture's wires to the house wires using wire nuts. Match the wires as follows:
- Black (Live) fixture wire to Black (Live) house wire.
- White (Neutral) fixture wire to White (Neutral) house wire.
- Green or Bare Copper (Ground) fixture wire to Green or Bare Copper (Ground) house wire.
Secure each connection with a wire nut and wrap with electrical tape for added safety.
- Accesorio de montaje: Carefully tuck the wires into the junction box. Align the fixture with the mounting plate and secure it using the provided screws. Ensure the fixture is flush against the ceiling.
- Instalar bombillas: Screw three (3) E12 base, 60-watt maximum incandescent bulbs (not included) into the sockets. Do not overtighten.
- Restaurar energía: Turn the main power supply back on at the circuit breaker or fuse box. Test the light fixture.
Imagen: Frente view of the Bopelo Semi-Flush Ceiling Lamp, mostrarasing its faux wood grain metal cage and three light sockets.
Image: The Bopelo Semi-Flush Ceiling Lamp installed in a room, demonstrating its appearance when mounted on a ceiling.
Instrucciones de funcionamiento
Once properly installed and wired, the Warehouse of Tiffany Bopelo Semi-Flush Ceiling Lamp operates via a standard wall switch (not included). Simply toggle the wall switch to turn the light fixture on or off.
Este dispositivo está diseñado únicamente para uso en interiores.
Mantenimiento
Limpieza
To clean the fixture, ensure the power is turned off at the circuit breaker. Use a soft, dry cloth to wipe down the metal surfaces. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
Reemplazo de bombilla
Before replacing bulbs, turn off the power to the fixture at the circuit breaker. Allow bulbs to cool completely before touching them. Unscrew the old bulb and screw in a new E12 base bulb, ensuring it does not exceed 60 watts. Restore power after replacement.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No hay energía en el dispositivo. La bombilla está suelta o quemada. Cableado incorrecto. | Revise el disyuntor. Apriete o reemplace la bombilla. Verify wiring connections (consult a professional if unsure). |
| Luz parpadeante. | Bombilla suelta. Conexión de cableado suelta. Tipo de bombilla incorrecto. | Apriete la bombilla. Verifique las conexiones del cableado (asegúrese de que la energía esté apagada). Ensure bulb is E12 base and within wattagy límites. |
| El accesorio zumba. | Componentes sueltos. Interruptor de regulación de intensidad incompatible (si corresponde). | Ensure all screws and nuts are tight. If using a dimmer, ensure it is compatible with incandescent lighting. |
Presupuesto
- Modelo: CM021 / 3
- Marca: Almacén de Tiffany
- Dimensiones: 15.75 pulgadas (diámetro) x 15.75 pulgadas (alto)
- Material: Metal
- Finalizar: Imitation Wood / Brown Painted
- Material de la sombra: Metal
- Número de luces: 3
- Tipo de bombilla: E12 (Candelabro)
- Wat máximotage por bombilla: 60 vatios
- Volumentage: 120 voltios
- Fuente de energía: AC (Hard-wired)
- Uso en interiores y exteriores: Interior
- Certificaciones: UL Listed, CSA Listed, ETL Listed
- Requiere ensamblaje: Sí
Imagen: Un detalle view of the Bopelo Semi-Flush Ceiling Lamp, highlighting the faux wood grain finish and structural elements.
Garantía y soporte
The manufacturer states "No." for warranty description in the provided data. For specific warranty details or support inquiries, please contact Warehouse of Tiffany directly.
For further assistance or replacement parts, please visit the official Warehouse of Tiffany store or contact their customer service.
Warehouse of Tiffany Store: Visita la tienda
