Introducción
Thank you for choosing the Teka Classic 1C 1E 50 cm Sink. This high-quality 18/10 stainless steel sink features a single bucket and drainer, designed for built-in and reversible installation. Its soundproofing properties reduce noise and vibration, ensuring a comfortable user experience. The 190 mm deep bucket accommodates large kitchen items, making it ideal for various culinary tasks. This manual provides essential information for the proper installation, operation, and maintenance of your new sink.
Descripción de la imagen: Un de arriba hacia abajo view of the Teka Classic 1C 1E sink, illustrating its built-in design and soundproofing capabilities. Text on the image indicates 'Fregadero encastrado' (Built-in sink) and 'Insonorización' (Soundproofing).
Descripción de la imagen: Un de arriba hacia abajo view of the Teka Classic 1C 1E sink, emphasizing its depth and stainless steel construction. Text on the image indicates 'Profundidad' (Depth) and 'Acero inoxidable' (Stainless Steel).
Información de seguridad
- Always ensure the water supply is turned off before beginning any installation or maintenance.
- Utilice equipo de protección personal (EPP) adecuado, como guantes y protección para los ojos, durante la instalación.
- Handle the sink with care to avoid scratches or damage to the stainless steel finish.
- Asegúrese de que todas las conexiones sean estancas para evitar fugas.
- Si no está seguro de algún paso, consulte con un profesional calificado.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación.
- Teka Classic 1C 1E 50 cm Sink
- Valve basket 3 ½"
- Installation clips/staples
- Soundproofing material (pre-applied)
Configuración e instalación
The Teka Classic 1C 1E sink is designed for built-in (recessed) installation and is reversible, allowing for flexible placement of the drainer.
1. Prepare the Countertop
Ensure your countertop has a cutout that matches the sink's dimensions. The sink is designed for a 50 cm furniture base. Refer to the dimension diagram for precise measurements.
Descripción de la imagen: A technical drawing showing the top-down dimensions of the Teka Classic 1C 1E sink. Key measurements include overall length (860mm), width (500mm), bowl dimensions (406mm x 406mm), and drainer dimensions. It also indicates a 35mm diameter hole for the faucet.
2. Position the Sink
Place the sink into the prepared cutout. The sink is reversible, allowing you to choose whether the drainer is on the left or right side.
Descripción de la imagen: Un ángulo view of the Teka Classic 1C 1E stainless steel sink, showing the single bowl and integrated drainer. The sink is shown installed flush with a light-colored countertop, highlighting its built-in design.
3. Secure the Sink
Use the provided installation clips or staples to secure the sink firmly to the underside of the countertop. Ensure an even seal around the perimeter to prevent water ingress.
4. Install Faucet and Drain Assembly
- Install your chosen faucet into the pre-drilled tap hole (35mm diameter).
- Assemble the 3 ½" valve basket and connect it to your plumbing system. Ensure all connections are tight and sealed to prevent leaks.
Descripción de la imagen: Un de arriba hacia abajo view of the Teka Classic 1C 1E sink with a modern chrome faucet installed in the designated tap hole. The image shows the sink's clean lines and the integration of the faucet.
Instrucciones de funcionamiento
The Teka Classic 1C 1E sink is designed for everyday kitchen use.
- Flujo de agua: Utilice el grifo instalado para controlar el flujo y la temperatura del agua.
- Drenaje: The 3 ½" valve basket effectively collects debris and allows for efficient water drainage. Ensure it is clear of large food particles to prevent blockages.
- Soundproofing: The integrated soundproofing material reduces noise during use, providing a quieter kitchen environment.
Mantenimiento y cuidado
El cuidado adecuado garantizará la longevidad y la apariencia de su fregadero de acero inoxidable.
- Limpieza diaria: Limpie el fregadero con un paño seco después de cada uso para evitar manchas de agua y acumulación de minerales.
- Limpieza regular: For a deeper clean, use a mild soap or a specialized stainless steel cleaner with a soft cloth or sponge. Always rub in the direction of the grain.
- Evite los abrasivos: No utilice limpiadores abrasivos, lana de acero ni productos químicos agresivos (por ejemplo, blanqueador, ácidos fuertes) ya que pueden rayar o dañar el acabado de acero inoxidable.
- Prevenir manchas: Avoid leaving acidic foods (e.g., citrus, tomatoes) or corrosive substances in the sink for extended periods. Rinse thoroughly after contact.
- Mantenimiento de drenaje: Periodically remove and clean the valve basket to prevent clogs and odors.
Solución de problemas
This section addresses common issues you might encounter with your sink.
- Drenaje lento:
Causa: Blockage in the drain or valve basket.Solución: Remove the valve basket and clean any accumulated food particles or debris. If the issue persists, a plumbing snake or drain cleaner may be required for the P-trap.
- Manchas de agua:
Causa: Depósitos de agua dura o secado inadecuado.Solución: Wipe the sink dry after each use. For existing spots, use a mixture of vinegar and water, or a specialized stainless steel cleaner, and buff with a soft cloth.
- Arañazos en la superficie:
Causa: Abrasive materials or harsh scrubbing.Solución: Stainless steel can scratch. Minor scratches can sometimes be blended with a fine abrasive pad (like Scotch-Brite) rubbed in the direction of the grain, but this should be done with caution. Prevent future scratches by avoiding abrasive cleaners and sharp objects.
- Leaks Around Sink Edge:
Causa: Improper sealing during installation or loose clips.Solución: Check the installation clips and tighten if necessary. Reapply silicone sealant around the sink's perimeter if the seal is compromised.
Presupuesto
| Característica | Detalle |
|---|---|
| Marca | Teca |
| Número de modelo | TEK-10119013 |
| Material | Acero inoxidable 18/10 |
| Color | Plata |
| Tipo de instalación | Built-in (Recessed) |
| Tipo de fregadero | Single Bowl with Drainer, Reversible |
| Dimensiones generales (An. x Pr. x Al.) | 86 cm x 50 cm x 19 cm (aprox. 33.86" de ancho x 19.69" de profundidad x 7.48" de alto) |
| Profundidad del tazón | 190 mm (7.48 pulgadas) |
| Tipo de drenaje | Grid (3 ½" Valve Basket) |
| Tap Hole Count | 1 (Ø35 mm) |
| Ancho mínimo del gabinete base | 50 centímetros |
| Peso del artículo | 4.06 kg (8.93 libras) |
| Insonorización | Sí |
Garantía y soporte
Teka products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Teka websitio.
If you require technical assistance, have questions about installation, or need to report a defect, please contact Teka customer support through their official channels.
- Teka Oficial Websitio: www.teka.com
- Servicio al cliente: Refer to your regional Teka websitio para obtener información de contacto local.
