Introducción
Thank you for choosing the Feit Electric 30 watts 1 lights LED Wall Pack. This product is designed to provide efficient and reliable outdoor lighting. This manual contains important information regarding the installation, operation, and maintenance of your LED wall pack. Please read it thoroughly before installation and retain it for future reference.
Información de seguridad
Siga siempre las precauciones básicas de seguridad al instalar y operar productos eléctricos para reducir el riesgo de incendio, descarga eléctrica y lesiones personales.
- Desconecte la energía en el disyuntor antes de realizar la instalación o el mantenimiento.
- Ensure all connections are made correctly and securely.
- This product is designed for outdoor use and is UL rated for wet locations.
- No intente modificar el dispositivo. Cualquier modificación podría anular la garantía y representar un riesgo para la seguridad.
- Consulte a un electricista calificado si no está seguro acerca del proceso de instalación.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- Feit Electric 30W LED Wall Pack Fixture
- Herrajes de montaje (tornillos, tuercas para cables)
- Manual de instrucciones

Image: The Feit Electric 30W LED Wall Pack shown in its retail packaging, indicating the 'PROSERIES' line and key features like 'Bronze Finish', '30W | 3200 Lumens', and '5000K Daylight'.
Instalación
This fixture is designed for universal 120-277V AC operation. Ensure power is OFF at the circuit breaker before proceeding.
- Preparar el cableado: Ensure the electrical box is securely mounted and the wiring is accessible.
- Montaje: Secure the fixture to the mounting surface using the provided hardware. The bronze die-cast aluminum housing is IP65 rated, protecting it from water jets and dust ingress.
- Conexiones eléctricas: Connect the fixture wires to the supply wires using appropriate wire nuts. Connect the black fixture wire to the live (hot) wire, the white fixture wire to the neutral wire, and the green/ground fixture wire to the ground wire.
- Accesorio seguro: Once wiring is complete, carefully push the fixture back against the mounting surface and secure it with the remaining screws.
- Optional Photocell Control: The fixture includes ½ inch threaded knockouts for maximum mounting versatility or the addition of a ½ inch photocell control (not included).

Imagen: Un lado detallado view of the Feit Electric 30W LED Wall Pack, showcasing its bronze die-cast aluminum housing and the textured borosilicate glass lens.
Configuración
After installation, restore power at the circuit breaker. The LED wall pack will illuminate immediately. No further setup is required unless an external photocell or timer is connected.
Instrucciones de funcionamiento
The Feit Electric 30W LED Wall Pack operates automatically when power is supplied. If connected to a switch, simply toggle the switch to turn the light on or off. If a photocell is installed, the light will automatically turn on at dusk and off at dawn.
Mantenimiento
The LED wall pack is designed for long-term, maintenance-free operation. The borosilicate glass lens ensures long life durability with no fading. To clean the fixture, ensure power is off and wipe the surface with a soft, damp Paño. No utilice limpiadores abrasivos ni disolventes.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. | No hay energía en el dispositivo. | Check circuit breaker and wall switch. Ensure all wire connections are secure. |
| La luz parpadea. | Conexión de cableado suelta. | Apague la energía y vuelva a verificar todas las conexiones de cables. |
| Light stays on during the day (with photocell). | La fotocélula está obstruida o defectuosa. | Ensure photocell is not covered. If issue persists, replace photocell. |
Presupuesto
| Característica | Especificación |
|---|---|
| Marca | Feit eléctrico |
| Modelo | 30 watts 1 lights LED Wall Pack |
| Consumo de energía | 30 vatios |
| Salida de lúmenes | 3200 lúmenes |
| Temperatura de color | 5000K (luz del día) |
| Índice de reproducción cromática (IRC) | 80 IRC |
| Promedio de horas | 50,000 horas |
| Material de la carcasa | Aluminio fundido a presión |
| Material de la sombra | Shatter-resistant Glass (Borosilicate) |
| Clasificación de protección de entrada (IP) | IP65 (Protected from water jets and dust ingress) |
| Volumentage | Universal 120-277V AC |
| Dimensions (H x W x E) | 10-13/16" x 9-7/8" x 9-13/16" |
| Peso del producto | 6.45 libras |
| Certificaciones | UL Rated for Wet Locations |
Garantía y soporte
Feit Electric products are manufactured to the highest quality standards. For warranty information or technical support, please refer to the contact information provided on the product packaging or visit the official Feit Electric webSitio. Conserve su recibo de compra como comprobante.





