Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Digital Stereo Receiver and accompanying 6.5" 2-Way Marine Speakers. Please read this manual thoroughly before attempting installation or operation to ensure proper use and to prevent damage.
Información de seguridad
- Desconecte siempre el terminal negativo de la batería del vehículo antes de la instalación para evitar cortocircuitos eléctricos.
- Asegúrese de que todo el cableado esté adecuadamente aislado y asegurado para evitar daños por vibración o abrasión.
- No opere la unidad de una manera que lo distraiga de la navegación segura.
- Consult a qualified marine electronics technician if you are unsure about any installation steps.
- This product is designed for marine environments; however, avoid direct high-pressure water spray on the unit.
Contenido del paquete
Verifique que todos los artículos estén presentes en su paquete:
- JBL PRV-175 Marine Gauge Hole Mount USB Bluetooth AM/FM Digital Stereo Receiver
- Two (2) pairs of 6.5" 225 Watt Peak Power High-Performance 2-Way Marine Speakers
- Mounting hardware for receiver (typically U-bracket, nuts, washers)
- Manual de usuario (este documento)
Nota: Speaker mounting hardware and speaker wire are typically not included and must be purchased separately.
Configuración e instalación
Receiver Installation (JBL PRV-175)
The PRV-175 receiver is designed for marine gauge-style mounting, fitting into a standard tachometer opening.
- Elija una ubicación de montaje: Select a flat, secure surface on your boat's dashboard or console that can accommodate the receiver's dimensions and provides adequate clearance for wiring.
- Corte el orificio de montaje: Using a suitable hole saw, cut a circular opening of approximately 3 inches (76mm) in diameter. Refer to the included template for precise measurements.
- Alambrado: Connect the power, ground, speaker outputs, and auxiliary inputs/outputs according to the wiring diagram provided with the unit. Ensure all connections are secure and waterproof.
- Monte el receptor: Insert the receiver into the opening. Secure it from the rear using the supplied U-bracket, nuts, and washers. Tighten until snug, but do not overtighten.
Imagen: Frente view of the JBL PRV-175 Marine Stereo Receiver, showing the display and control buttons. This unit is designed for gauge-style mounting.
Speaker Installation (6.5" Marine Speakers)
The 6.5" marine speakers are designed for flush mounting in suitable locations on your boat.
- Seleccionar ubicaciones de montaje: Choose locations that provide optimal sound dispersion and are structurally sound. Ensure there is sufficient depth behind the mounting surface for the speaker magnet.
- Cut Speaker Openings: Carefully cut circular openings for the speakers, typically around 5.6 inches (142mm) in diameter. Refer to the speaker's template for exact dimensions.
- Conecte los cables del altavoz: Run speaker wires from the receiver to each speaker location. Connect the positive (+) and negative (-) terminals of the speaker to the corresponding wires from the receiver. Ensure correct polarity for optimal sound.
- Monte los parlantes: Place the speakers into the openings and secure them using appropriate marine-grade screws (not included) through the mounting holes on the speaker frame.
Imagen: Frente view of a JBL 6.5-inch Marine Speaker with a chrome grille. These speakers are designed for flush mounting in marine environments.
Instrucciones de funcionamiento
Encendido/apagado
- Mantenga pulsado el MODE/SEL Botón para encender o apagar la unidad.
Control de volumen
- Prensa VOL+ para aumentar el volumen.
- Prensa vol- para bajar el volumen.
Selección de fuente
- Presione el MODE/SEL button repeatedly to cycle through available sources: AM, FM, Bluetooth (BT MUSIC), USB, and Auxiliary (AUX).
Operación de radio AM / FM
- In AM/FM mode, press the ESCANEAR/APS Botón para escanear y almacenar automáticamente estaciones fuertes.
- Utilice el Pista anterior (◀◀) y Pista siguiente (▶▶) buttons to manually tune or seek through stations.
Transmisión de audio por Bluetooth
- Emparejamiento: Select BT MUSIC mode. On your Bluetooth-enabled device, search for available devices and select "JBL PRV-175". Enter "0000" if a passcode is required.
- Reproducción: Una vez emparejados, puedes transmitir audio desde tu dispositivo. Usa el Reproducir/Pausa (▶▶) button on the receiver to control playback. Use the Pista anterior (◀◀) y Pista siguiente (▶▶) botones para saltar pistas.
Reproducción USB
- Insert a USB drive (containing compatible audio files) into the USB port. The unit will automatically switch to USB mode and begin playback.
- Utilice el Reproducir/Pausa (▶▶), Pista anterior (◀◀), y Pista siguiente (▶▶) botones para controlar la reproducción.
Entrada auxiliar
- Connect an external audio device to the auxiliary input using a 3.5mm audio cable.
- Select AUX mode on the receiver. Audio playback is controlled from the connected device.
Mantenimiento
- Limpieza: Utilice un paño suave y seco.amp cloth to clean the receiver's faceplate and speaker grilles. Avoid harsh chemicals or abrasive cleaners.
- Conexiones: Revise periódicamente todas las conexiones del cableado para detectar corrosión o holgura, especialmente en entornos marinos.
- Almacenamiento: If the boat is stored for an extended period, ensure the unit is powered off and consider disconnecting the battery.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| No llega energía a la unidad | Blown fuse; improper wiring; battery disconnected | Check and replace fuse; verify power and ground connections; ensure battery is connected. |
| No hay sonido de los altavoces | Incorrect source selected; speaker wires disconnected; volume too low; ampproblema del filtro | Select correct source; check speaker wire connections; increase volume; consult technician if amplifier is suspected. |
| El Bluetooth no se conecta | Unit not in BT MUSIC mode; device not in pairing mode; interference | Ensure receiver is in BT MUSIC mode; put device in pairing mode; move device closer to receiver; try re-pairing. |
| USB no se reproduce | Incompatible file format; USB drive not recognized; unit not in USB mode | Asegurar files are compatible (e.g., MP3); try a different USB drive; select USB mode. |
Presupuesto
JBL PRV-175 Marine Receiver
- Tipo: Marine Gauge Style Digital Media Receiver
- Sintonizador: Radio AM/FM
- Conectividad: Bluetooth Audio Streaming, USB input (for USB drives only), Auxiliary input (3.5mm Jack)
- Ampmás duradero: Built-In, 45 Watts Peak x 4 channels (20 Watts RMS x 4 channels)
- Placa frontal: Impermeable
- Salidas: 2 pares de salida RCA
- Control: Opción remota con cable
- Número de modelo: PRV-175
6.5" Marine Speakers
- Tipo: 2-way 6-1/2" marine speaker
- Manejo de potencia: 2-75 Watts RMS, 225 Watts Peak Power
- woofer: Cono de polipropileno con borde de goma.
- tweeter: Grille-mounted 1" polypropylene semi-dome
- Cesta: Cast-polymer
- Respuesta de frecuencia: 50-20,000 Hz
- Sensibilidad: 92 dB
General
- Peso del artículo: 8.34 libras (paquete total)
- Dimensiones del paquete: 16.14 x 12.76 x 10.71 pulgadas
- Fabricante: JBL
- Color: Negro
Garantía y soporte
Para obtener información sobre la garantía y soporte técnico, consulte la tarjeta de garantía incluida con su producto o visite el sitio web oficial de JBL. website. You may also contact JBL customer service directly for assistance with product operation, troubleshooting, or parts.
