Manual del usuario del receptor de audio Radial Catapult MINI TX Cat 5

Introducción

The Radial Catapult MINI TX is a compact and robust 4-channel analog audio snake transmitter designed to send balanced audio signals over a standard Cat 5 or Cat 6 Ethernet cable. This device, when paired with a Catapult MINI RX unit (sold separately), provides a convenient and cost-effective solution for transmitting multiple audio channels over long distances, utilizing existing network infrastructure or dedicated Cat cable runs. Its passive design ensures high-fidelity audio transmission without the need for power.

Radial Catapult MINI TX unit, angled view, mostrando la c azulasing and product name.

Figure 1: Radial Catapult MINI TX unit, angled view, highlighting its compact design and branding.

Características principales

4-Channel Audio Transmission: Supports four balanced analog audio signals.
Cat 5/6 Connectivity: Utilizes standard Ethernet cables for signal transmission, offering flexibility and cost savings.
Operación pasiva: Requires no external power, simplifying setup and increasing confiabilidad.
Diseño compacto y duradero: Housed in a rugged steel enclosure, suitable for professional use.
XLR and RJ45 Connectors: Standardized connectors for easy integration into existing audio systems.

Instrucciones de instalación

Setting up the Catapult MINI TX is straightforward. Ensure you have a Catapult MINI RX unit and a shielded Cat 5 or Cat 6 Ethernet cable of appropriate length for your application.

Identificar componentes: Locate the Catapult MINI TX (transmitter) and Catapult MINI RX (receiver) units. The TX unit typically has female XLR inputs, and the RX unit has male XLR outputs.
Connect Audio Sources to TX: Connect your balanced audio sources (e.g., microphones, preamps, mixing console outputs) to the four female XLR inputs on the Catapult MINI TX unit. Each input corresponds to a specific channel.

Radial Catapult MINI TX with four XLR cables connected, showing the input side.

Figure 2: Catapult MINI TX with four XLR cables connected, illustrating the input setup.

Conectar el cable Ethernet: Connect one end of a shielded Cat 5 or Cat 6 Ethernet cable to the RJ45 connector on the Catapult MINI TX unit.

Fin view of Radial Catapult MINI TX showing the RJ45 and XLR connectors.

Figura 3: Fin view of the Catapult MINI TX, highlighting the RJ45 and XLR connector ports.

Connect RX Unit: Connect the other end of the Ethernet cable to the RJ45 connector on the Catapult MINI RX unit.
Connect Audio Destinations from RX: Connect the male XLR outputs of the Catapult MINI RX unit to your audio destinations (e.g., mixing console inputs, audio interface inputs, powered speakers).
Verificar conexiones: Double-check all cable connections to ensure they are secure and correctly routed.

Instrucciones de funcionamiento

Once the Catapult MINI TX and RX units are connected, operation is automatic due to their passive design. No power or configuration is required.

Flujo de señal: Audio signals from your sources connected to the TX unit's XLR inputs will be transmitted over the Cat 5/6 cable to the RX unit, and then output via its XLR connectors.
Mapeo de canales: Each XLR input on the TX unit corresponds directly to an XLR output on the RX unit. Ensure your audio sources and destinations are connected to the correct channels.
Longitud del cable: While Cat 5/6 cables can transmit signals over significant distances, extremely long runs (e.g., hundreds of feet) may introduce slight signal degradation. Test your setup with the intended cable length to ensure optimal performance.
Shielded Cable Requirement: Always use shielded Cat 5 or Cat 6 cable for reliable and noise-free operation. Unshielded cables may introduce interference.

Mantenimiento

The Radial Catapult MINI TX is designed for durability and requires minimal maintenance.

Limpieza: Utilice un paño suave y seco para limpiar el exterior de la unidad. Evite limpiadores abrasivos o disolventes.
Almacenamiento: Store the unit in a dry environment, away from extreme temperatures and direct sunlight, when not in use.
Inspección de cables: Periodically inspect your Cat 5/6 and XLR cables for any signs of wear, damage, or corrosion. Replace damaged cables immediately.
Cuidado del conector: Keep the XLR and RJ45 connectors free of dust and debris.

Solución de problemas

If you encounter issues with your Catapult MINI TX, consider the following troubleshooting steps:

Problema	Posible causa	Solución
No hay señal de audio	Conexión de cable incorrecta Damaged Cat 5/6 cable Unshielded Cat 5/6 cable Cable XLR defectuoso Source/destination device issues	Ensure all XLR and RJ45 cables are securely connected. Verify you are using a shielded Cat 5 or Cat 6 cable. Test cables individually with other equipment. Check power and settings of connected audio devices.
Zumbido o ruido en el audio	Unshielded Cat 5/6 cable Ground loop issues Interferencia electromagnética externa	Ensure you are using a shielded Cat 5 or Cat 6 cable. Try isolating power supplies of connected equipment. Route Cat cable away from power lines or strong electromagnetic fields.
señal intermitente	Conexiones de cables sueltas Cable o conector dañado	Reseat all cables firmly. Inspect cables and connectors for physical damage. Replace if necessary.

Presupuesto

Característica	Detalle
Modelo	R800 8028
Canales	4 (balanced analog audio)
Connector Type (Audio)	XLR Female (Input)
Connector Type (Data)	RJ45
Requisito de cable	Shielded Cat 5 or Cat 6 Ethernet cable
Operación	Passive (no power required)
Dimensiones (L x An x Al)	6.3 x 4.3 x 3 pulgadas (aproximadamente)
Peso	1.06 libras (aproximadamente)
Material de construcción	Acero
Color	Azul

Garantía y soporte

Radial Engineering products are built to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official Radial Engineering website or contact their customer support directly. For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the Radial Engineering support page or contact their authorized service centers.

Oficial Websitio: www.radialeng.com

	Radial HotShot MD StagGuía del usuario del conmutador de micrófono electrónico Guía del usuario para el Radial HotShot MD, comotagConmutador de micrófonos diseñado para el redireccionamiento momentáneo de micrófonos dinámicos a múltiples destinos, que ofrece un control sencillo para la comunicación entre vocalistas y miembros de la banda.
	Guía de usuario de Radial J48 Active Direct Box Guía de usuario completa para Radial J48 Active Direct Box, que detalla sus características, funciones, especificaciones e información de garantía para aplicaciones de audio profesionales.
	Guía del usuario de la caja directa pasiva Radial JDI Guía completa del usuario de la caja directa pasiva Radial JDI, que detalla sus características, especificaciones, aplicaciones y solución de problemas. Aprenda sobre su transformador Jensen, la impedancia de entrada/salida y cómo lograr un rendimiento de audio óptimo.
	Guía del usuario de Radial Headbone VT: Guitarra Amp Cambio de cabeza Guía completa del usuario del Radial Headbone VT, un dispositivo que permite a los guitarristas alternar entre dos válvulas. ampCabezales de amplificador y una sola caja acústica con control mediante pedal. Incluye información sobre configuración, características, seguridad y solución de problemas.
	Guía del usuario del rack Radial Workhorse Powerhouse serie 500 Guía del usuario del Radial Workhorse Powerhouse, un bastidor de rack de la serie 500 con 10 ranuras. Incluye detalles sobre características, instalación, flujo de señal, fuente de alimentación, especificaciones e información de garantía para ingenieros de audio profesionales.
	Guía del usuario del divisor de línea aislado con transformador de ocho canales Radial LX8 Guía completa del usuario del Radial LX8, un divisor de línea de ocho canales con aislamiento por transformador, diseñado para aplicaciones de audio profesional. Conozca sus características, flujo de señal, conexiones y solución de problemas para lograr una calidad de audio profesional y eliminar el ruido de bucle de tierra.

Radial Engineering R800 8028