E-flite Tail Set: Mini Convergence (EFL9302) Instruction Manual

Introducción

This manual provides essential instructions for the E-flite Tail Set, model EFL9302, specifically designed for the Mini Convergence aircraft. It covers important safety guidelines, installation procedures, maintenance tips, and product specifications to ensure proper use and longevity of your aircraft component.

Información de seguridad

ADVERTENCIA:

Lea el manual de instrucciones COMPLETO para familiarizarse con las características del producto antes de usarlo. No operar el producto correctamente puede causar daños al producto, a la propiedad personal y lesiones graves. Este es un producto de hobby sofisticado. Debe operarse con precaución y sentido común, y requiere cierta habilidad mecánica básica. No operar este producto de manera segura y responsable podría causar lesiones o daños al producto u otra propiedad. Este producto no está diseñado para ser usado por niños sin la supervisión directa de un adulto. No lo use con componentes incompatibles ni lo altere de ninguna manera fuera de las instrucciones proporcionadas por Horizon Hobby, LLC. El manual del producto contiene instrucciones de seguridad, operación y mantenimiento. Es esencial leer y seguir todas las instrucciones y advertencias del manual, antes del ensamblaje, configuración o uso, para operar correctamente y evitar daños o lesiones graves.

¿Qué hay en la caja?

• Tail Set: Mini Convergence

Configuración e instalación

1. Preparación: Ensure your Mini Convergence aircraft is powered off and the battery is disconnected before beginning installation. Clear your workspace and gather any necessary tools (e.g., small screwdriver, adhesive if required).
2. Remove Existing Tail Components (if applicable): Carefully detach any damaged or old tail components from the aircraft fuselage. Refer to your aircraft's main manual for specific removal instructions.
3. Align New Tail Set: Position the new E-flite Tail Set pieces onto the designated areas of the Mini Convergence fuselage. Ensure proper orientation and alignment with the aircraft's structure. The pieces should fit snugly.
4. Secure the Tail Set: Depending on the aircraft design, secure the tail set using the provided fasteners or recommended adhesive. Apply adhesive sparingly and allow adequate drying time if used. Ensure all connections are firm and stable.
5. Verify Control Surface Movement: Once installed, gently check the movement of any integrated control surfaces (e.g., rudders, elevators) on the tail set. Ensure they move freely and without obstruction. Reconnect the battery and perform a control surface test with your transmitter to confirm correct operation and direction.

Always refer to the complete Mini Convergence aircraft manual for detailed assembly and setup instructions, as this tail set is a replacement part.

Consideraciones operativas

The E-flite Tail Set is a structural and aerodynamic component of your Mini Convergence aircraft. Its operation is integral to the overall flight performance and stability. Once correctly installed, the tail set functions passively to provide lift, stability, and control authority through its associated control surfaces (if any). Ensure all control linkages are properly connected and calibrated before flight.

Mantenimiento

• Inspección regular: Before each flight, visually inspect the tail set for any signs of damage, cracks, or loose connections.
• Limpieza: If necessary, gently clean the tail set with a soft, damp cloth. Avoid using harsh chemicals that could damage the foam material.
• Almacenamiento: Store the aircraft in a safe place, away from direct sunlight and extreme temperatures, to prevent material degradation.
• Reparar: Minor damage to foam can often be repaired with foam-safe adhesive. For significant damage, replacement of the tail set is recommended.

Solución de problemas

• Loose Tail Set: If the tail set feels loose after installation, re-check all fasteners or adhesive points. Ensure they are securely attached.
• Incorrect Control Surface Movement: If control surfaces on the tail (e.g., elevator, rudder) do not move correctly, verify that linkages are properly connected to the servos and that the servo directions are correctly set on your transmitter.
• Daños visibles: Any visible cracks or deformities should be addressed immediately. Depending on severity, repair with foam-safe glue or replace the component.

Presupuesto

Garantía y soporte

For warranty information, technical support, or replacement parts, please contact Horizon Hobby, LLC, the manufacturer of E-flite products. Refer to their official website or the original aircraft manual for contact details and specific warranty terms applicable to your region.

Horizon Hobby, LLC: Www.horizonhobby.com