1. Introducción
The E-flite Viper 70mm EDF Jet is designed to provide a high-performance jet experience with the stability of a low-wing sport airplane. This model is suitable for both experienced jet pilots and those new to EDF jets, offering incredible speed, vertical performance, and aerobatic capabilities. It features exclusive AS3X and SAFE Select technologies for enhanced flight stability and ease of control.
This manual provides essential information for the assembly, operation, and maintenance of your E-flite Viper 70mm EDF Jet. Please read it thoroughly before operating the aircraft to ensure safe and optimal performance.
Image 1.1: The E-flite Viper 70mm EDF Jet, showcasing its sleek design and livery.
2. Normas de seguridad
Operating a remote-controlled aircraft requires caution and adherence to safety protocols. Failure to operate this product safely and responsibly could result in injury or damage to the product or property.
- Lea el manual completo: Familiarize yourself with the product features and operating requirements before use.
- Operar en áreas abiertas: Always fly in open spaces away from people, vehicles, and buildings. Avoid flying near power lines or busy roads.
- Seguridad de la batería: Use only recommended batteries and chargers. Always handle LiPo batteries with extreme care. Never leave charging batteries unattended. Disconnect the battery when not in use.
- Fan Safety: Keep hands, face, and loose clothing away from the rotating fan unit. The fan can cause severe injury.
- Comprobaciones previas al vuelo: Before each flight, ensure all control surfaces move correctly, the battery is fully charged and secured, and the transmitter is properly bound and functioning.
- Condiciones climáticas: No vuele con vientos fuertes, lluvia u otras condiciones climáticas adversas.
- Recomendación de edad: This product is not a toy. It is intended for experienced RC pilots.
3. Qué incluye
The E-flite Viper 70mm EDF Jet (EFL7750) is a Bind-N-Fly (BNF) Basic model. This means the aircraft comes largely pre-assembled with essential electronics installed, but requires additional components for flight.
Componentes incluidos:
- E-flite Viper 70mm EDF Jet Airframe
- 70mm EDF (Electric Ducted Fan) unit with 12-blade fan
- 6S-compatible brushless motor
- 70-amp Controlador de velocidad electrónico (ESC)
- Digital, metal-geared servos (factory-installed)
- Electric retracts (factory-installed)
- Functional flaps (factory-installed)
- AS3X and SAFE Select technologies receiver
Required for Completion (Not Included):
- Full-range 6+ channel Spektrum DSMX/DSM2 compatible transmitter
- 6S 22.2V LiPo flight battery (recommended 3200-4000mAh, 30C minimum)
- Cargador de LiPo compatible
4. Configuración y montaje
The Viper 70mm EDF Jet is designed for quick and straightforward assembly, requiring no glue.
4.1 Wing and Stabilizer Installation
The aircraft features a one-piece wing and stabilizers that bolt into place. Carefully align the wing with the fuselage and secure it using the provided screws. Repeat this process for the horizontal stabilizers, ensuring they are correctly oriented.
Image 4.1: Detail of the wing and main landing gear assembly.
Imagen 4.2: Trasera view showing the horizontal stabilizers and wing attachment points.
4.2 Enlace del transmisor
As a BNF Basic model, the aircraft requires binding to a compatible Spektrum DSMX/DSM2 transmitter. Refer to your transmitter's manual for specific binding procedures. Ensure the aircraft's receiver is in bind mode before initiating the binding process from your transmitter.
4.3 Instalación de la batería
Access the battery compartment via the large top-mounted hatch. Secure the recommended 6S LiPo flight battery (3200-4000mAh) using the provided hook-and-loop straps. Ensure the battery is positioned to achieve the correct Center of Gravity (CG) as specified in the full product manual (available on the E-flite website). Incorrect CG can significantly affect flight performance.
4.4 Comprobaciones de la superficie de control
After binding and battery installation, perform a thorough control surface check. Power on your transmitter, then connect the flight battery. Verify that all control surfaces (ailerons, elevator, rudder, flaps) move freely and in the correct direction relative to your stick inputs. Adjust servo directions and throws on your transmitter as needed.
Imagen 4.3: Detallada view of the cockpit, accessible via the top hatch for battery installation.
5. Instrucciones de funcionamiento
The E-flite Viper 70mm EDF Jet offers a dynamic flying experience, enhanced by its integrated AS3X and SAFE Select technologies.
5.1 Comprobaciones previas al vuelo
- Ensure all control surfaces are free and move correctly.
- Verify the flight battery is fully charged and securely installed.
- Confirme que la batería del transmisor esté cargada.
- Check for any damage to the airframe, fan unit, or landing gear.
- Realice una verificación del alcance de su sistema de radio.
5.2 Despegue
The Viper is designed for easy takeoffs. Position the aircraft on a smooth surface, facing into the wind if possible. Gradually advance the throttle to full power. The electric retracts will allow for a smooth roll-out. Apply slight up-elevator as the aircraft gains speed to lift off.
5.3 Características del vuelo
This jet delivers smooth, sport airplane-like handling combined with impressive speed and aerobatic capability. The 12-blade fan and 6S-compatible brushless motor provide significant thrust and a turbine-like sound. AS3X technology works behind the scenes to smooth out the effects of wind and turbulence, providing a locked-in feel. SAFE Select offers optional flight envelope protection, limiting pitch and bank angles and providing automatic self-leveling, making it ideal for less experienced jet pilots.
5.4 Aterrizaje
Landing the Viper is straightforward, especially with the functional flaps and electric retracts. Extend the landing gear and deploy flaps on approach to reduce speed and increase lift. Maintain a controlled descent rate and aim for a smooth touchdown on the main gear, followed by the nose wheel.
6. Mantenimiento
Regular maintenance ensures the longevity and performance of your E-flite Viper.
- Inspección posterior al vuelo: After each flight, inspect the airframe for any damage, cracks, or loose components. Check all control linkages for free movement and secure connections.
- Tren de aterrizaje: The electric retracts are robust, but hard landings can potentially bend the landing gear struts. Inspect them regularly and gently bend them back into alignment if necessary to ensure proper retraction and extension.
- servos: The digital, metal-geared servos are durable. Check for any slop or unusual noise. Replace any damaged servos promptly.
- Unidad de ventilador: Inspect the 70mm EDF unit for any debris or damage to the fan blades. Clear any obstructions to maintain optimal thrust and efficiency.
- Cuidado de la batería: Store LiPo batteries at a storage charge (approximately 3.8V per cell) when not in use for extended periods. Never store fully charged or fully discharged LiPo batteries.
- Limpieza: Clean the airframe with a soft, damp cloth. Avoid using harsh chemicals that could damage the EPO foam.
7. Solución de problemas
This section addresses common issues you might encounter with your E-flite Viper 70mm EDF Jet.
| Problema | Posible causa | Solución |
|---|---|---|
| Aircraft does not bind to transmitter. | Incorrect binding procedure; transmitter not in bind mode; receiver not in bind mode; incompatible transmitter. | Ensure both transmitter and receiver are in bind mode. Refer to both manuals. Verify transmitter compatibility (Spektrum DSMX/DSM2). |
| Control surfaces do not respond or move incorrectly. | Incorrect servo connections; reversed servo direction in transmitter; damaged servo or linkage; low receiver battery. | Check all servo connections. Correct servo directions in transmitter. Inspect servos and linkages for damage. Ensure flight battery is adequately charged. |
| Motor does not spin or spins intermittently. | Loose motor/ESC connection; damaged ESC or motor; low flight battery; throttle trim too high/low. | Check all power connections. Ensure flight battery is fully charged. Calibrate ESC throttle range. Lower throttle trim to minimum. If issues persist, inspect ESC and motor for damage. |
| La aeronave vuela erráticamente o es difícil de controlar. | Incorrect Center of Gravity (CG); AS3X/SAFE Select not initialized; control surface trim issues; wind conditions. | Verify CG is correct. Ensure AS3X/SAFE Select initializes properly (aircraft must be still during power-up). Adjust trims as needed. Avoid flying in strong winds. |
| Landing gear does not retract/extend fully. | Bent strut; obstruction; servo issue; low voltage. | Inspect landing gear struts for bends and gently straighten if possible. Check for any debris obstructing movement. Ensure flight battery has sufficient voltage. |
| Smoke or burning smell from electronics. | Short circuit; overloaded ESC/motor; incorrect battery. | Immediately disconnect the flight battery. Do not attempt to operate the aircraft. Inspect all wiring and components for damage. Contact E-flite support for assistance. Ensure you are using the correct battery type and capacity. |
8. Especificaciones
Key technical specifications for the E-flite Viper 70mm EDF Jet (EFL7750):
- Modelo: E-flite Viper 70mm EDF Jet
- Número de modelo: EFL7750
- Envergadura: 1100 mm (43.3 pulgadas)
- Longitud: Approximately 1020mm (40.2 inches) (estimated, refer to full manual for exact dimensions)
- EDF Unit: 70mm, 12-blade
- Motor: 6S-compatible Brushless Outrunner
- ESCAPE: 70-amp
- servos: Digital, Metal-Geared
- Receptor: Spektrum AS3X/SAFE Select compatible
- Batería recomendada: 6S 22.2V 3200-4000mAh LiPo (30C minimum)
- Material: Espuma EPO
- Dimensiones del producto: 115.57 x 34.29 x 23.5 pulgadas (dimensiones de embalaje/envío)
9. Garantía y soporte
For warranty information, technical support, or replacement parts, please contact E-flite customer service or visit the official E-flite webSitio. Conserve su comprobante de compra para reclamaciones de garantía.
E-Flite Websitio: www.e-fliterc.com
Soporte de Horizon Hobby: E-flite products are often supported by Horizon Hobby. Refer to their webSitio para obtener detalles de contacto y recursos de soporte.
