Manual de instrucciones del ventilador axial EBM de 115 voltios Delfield 2160045

1. Introducción

This manual provides essential information for the safe and efficient use of the Delfield 2160045 Axial Ebm 115 Volt Fan. Please read these instructions thoroughly before installation, operation, or maintenance to ensure proper function and longevity of the unit. This fan is a genuine OEM replacement part from Delfield, designed for industrial and scientific applications, particularly as a cooling component.

Producto terminadoview

The Delfield 2160045 is an axial fan operating at 115 Volts, designed for cooling purposes. Key features include:

• Número de pieza: 2160045
• Volumentage: 115 voltios
• Método de enfriamiento: Aire
• Material: Cobre
• País natal: Hungría
• Dimensiones: Aproximadamente 6.3" de largo x 9" de ancho x 9" de alto

Figura 1.1: Frente view of the Delfield 2160045 Axial Ebm 115 Volt Fan, showing the fan blades and the manufacturer's label. The label indicates model EC12038BH0HT-01-002, 100-120V/220-240V AC, 50/60Hz, 15W, and part number 21600451804633149004.

2. Información de seguridad

Observe siempre las siguientes precauciones de seguridad para evitar lesiones o daños al producto.

• Desconecte la alimentación antes de realizar la instalación, el mantenimiento o la limpieza.
• Asegure una conexión a tierra adecuada para evitar descargas eléctricas.
• No opere el ventilador si alguna pieza está dañada.
• Keep fingers and foreign objects away from moving fan blades.
• Instalar en un área bien ventilada, lejos de materiales inflamables.
• Refer to local electrical codes for wiring requirements.

3. Configuración e instalación

This section outlines the general steps for installing the Delfield 2160045 Axial Ebm 115 Volt Fan.

1. Desembalaje: Carefully remove the fan from its packaging. Inspect for any signs of damage during transit.
2. Ubicación de montaje: Select a suitable mounting location that allows for adequate airflow and is free from obstructions. Ensure the surface can support the fan's weight.
3. Montaje del ventilador:
   • Align the fan with the mounting holes on the equipment or enclosure.
   • Secure the fan using appropriate screws or fasteners (not included). Ensure the fan is mounted firmly to prevent vibration.
4. Conexión eléctrica:
   • Asegúrese de que la fuente de alimentación esté desconectada antes de realizar cualquier conexión eléctrica.
   • Connect the fan's power connector (3-Pin, 4-Pin, or SATA/Molex, depending on the specific unit and application) to the corresponding power source.
   • Verificar que el voltage matches the fan's requirements (115 Volts AC).
   • Asegúrese de que todas las conexiones estén seguras y aisladas.
5. Dirección del flujo de aire: Confirm the desired airflow direction before final installation. Axial fans typically have an arrow indicating airflow direction on the housing.

Figura 3.1: Lado view of the Delfield 2160045 fan, illustrating its compact design and mounting points.

4. Instrucciones de funcionamiento

Once installed, operating the Delfield 2160045 fan is straightforward.

1. Encendido: After ensuring all connections are secure and safe, restore power to the system or equipment where the fan is installed.
2. Comprobación inicial: Observe the fan for proper rotation and listen for any unusual noises. The fan should operate smoothly.
3. Operación continua: The fan is designed for continuous operation to provide consistent airflow and cooling.
4. Escucha: Periodically check the fan's performance to ensure it is effectively cooling the intended area.

5. Mantenimiento

Regular maintenance ensures optimal performance and extends the lifespan of your Delfield 2160045 fan.

• Limpieza:
  • Desconecte la alimentación antes de limpiar.
  • Utilice un cepillo suave o aire comprimido para eliminar el polvo y la suciedad de las aspas y la carcasa del ventilador.
  • Do not use liquid cleaners directly on electrical components.
• Inspección:
  • Periodically inspect the fan for any signs of wear, damage, or loose connections.
  • Check for excessive vibration or unusual noises, which may indicate a problem.
• Lubricación: This fan is typically sealed and does not require user lubrication. Do not attempt to lubricate internal components.

Figura 5.1: Trasero view of the Delfield 2160045 fan, showing the motor housing and structural elements.

6. Solución de problemas

Consulte la siguiente tabla para conocer los problemas comunes y sus posibles soluciones.

Si el problema persiste después de intentar estas soluciones, comuníquese con personal de servicio calificado.

7. Especificaciones

Detailed technical specifications for the Delfield 2160045 Axial Ebm 115 Volt Fan:

• Número de modelo: 2160045
• Marca: DELFIELD
• Volumentage: 115 voltios
• Quétage: 115 vatios
• Método de enfriamiento: Aire
• Tipo de conector de alimentación: 3-Pin or 4-Pin or SATA/Molex
• Dimensiones del producto: 6.3" de largo x 9" de ancho x 9" de alto
• Dimensiones del paquete: 7 L x 9 H x 9 W (pulgadas)
• Peso del paquete: 0.7 libras
• Material: Cobre
• Dispositivos compatibles: De oficina
• Fabricante: DELFIELD
• País natal: Hungría
• Fecha de primera disponibilidad: 15 de enero de 2019

8. Garantía y soporte

Specific warranty information for the Delfield 2160045 Axial Ebm 115 Volt Fan is typically provided at the point of purchase or with the product packaging. As this is a genuine OEM replacement part, warranty terms may be subject to the original equipment manufacturer's policies.

For technical support, replacement parts, or warranty claims, please contact your authorized Delfield dealer or the supplier from whom the product was purchased. Ensure you have the model number (2160045) and purchase details available when contacting support.