Manual del usuario del punto de acceso WiFi móvil Verizon Ellipsis Jetpack MHS800L

Introducción

The Verizon Ellipsis Jetpack MHS800L is a compact and portable 4G LTE mobile Wi-Fi hotspot designed to provide internet access for multiple devices on the go. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Jetpack.

Imagen: Frente view of the Verizon Ellipsis Jetpack MHS800L, displaying its compact size and the OLED screen with network status indicators.

Primeros pasos: configuración

Contenido del paquete

Verifique que su paquete contenga los siguientes elementos:

• Verizon Ellipsis Jetpack MHS800L device
• Batería
• Cable de carga USB
• Power Adapter (may vary)

Inserción de la tarjeta SIM y la batería

1. Locate the battery cover on the back of the Jetpack. Gently slide or lift the cover to remove it.
2. If a SIM card is not pre-installed, carefully insert your Verizon 4G LTE SIM card into the designated SIM card slot. Ensure the gold contacts face down and the notched corner aligns correctly.
3. Inserte la batería en su compartimento, alineando los contactos.
4. Vuelva a colocar la tapa de la batería, asegurándose de que encaje firmemente en su lugar.

Imagen: Parte posterior view of the Verizon Ellipsis Jetpack MHS800L, indicating the area where the battery and SIM card are typically accessed.

Carga del dispositivo

Before first use, fully charge your Jetpack. Connect the USB charging cable to the Jetpack's charging port and the other end to the power adapter. Plug the adapter into a wall outlet. The OLED display will indicate charging status.

Encendido/apagado

• Para encender: Press and hold the Power button (usually located on the side or top edge) until the OLED display illuminates.
• Para apagar: Press and hold the Power button until the "Power Off" message appears on the display, then release.

Operación del dispositivo

Connecting Devices to the Jetpack

The Jetpack allows up to 8 Wi-Fi enabled devices to connect simultaneously.

1. Ensure your Jetpack is powered on and has an active 4G LTE connection.
2. En su dispositivo con Wi-Fi habilitado (computadora portátil, tableta, teléfono inteligente), abra la configuración de Wi-Fi.
3. Scan for available Wi-Fi networks. The Jetpack's network name (SSID) will typically be displayed on its OLED screen or on a label inside the battery compartment.
4. Select the Jetpack's SSID from the list.
5. Enter the Wi-Fi password (security key) when prompted. This is also usually displayed on the Jetpack's screen or label.
6. Your device should now be connected to the internet via the Jetpack.

Checking Data Usage and Status

The 0.9-inch OLED display provides real-time reporting of data usage and device status.

Imagen: Primer plano view of the Jetpack's OLED display, showing signal strength, battery level, and network type (Verizon 4G LTE).

• Intensidad de la señal: Bars indicate the strength of the 4G LTE cellular signal.
• Nivel de batería: An icon shows the current battery charge.
• Dispositivos conectados: An icon or number may indicate how many devices are currently connected.
• Uso de datos: The display can cycle through screens to show current data usage. Refer to the on-screen prompts or device menu for navigation.

Uso de WPS (configuración protegida de Wi-Fi)

WPS allows for easy connection of compatible devices without manually entering the password.

1. On the Jetpack, navigate to the WPS option via the device's menu or by pressing a dedicated WPS button if available.
2. Activate WPS on your client device within two minutes.
3. Los dispositivos se conectarán automáticamente.

Mantenimiento

Cuidado de la batería

• Evite exponer la batería a temperaturas extremas.
• No perfore, desmonte ni cortocircuite la batería.
• Si el dispositivo no se utilizará durante un período prolongado, guárdelo con una carga parcial (alrededor del 50%) en un lugar fresco y seco.

Limpieza

Limpie el dispositivo con un paño suave, seco y sin pelusa. No utilice limpiadores líquidos ni aerosoles.

Actualizaciones de software

Periodically check for software updates for your Jetpack. Updates can improve performance, add features, and enhance security. Updates are typically managed through the device's web interface or automatically pushed by Verizon.

Solución de problemas

Restablecimiento de fábrica

A factory reset will restore the Jetpack to its original settings, including Wi-Fi name and password. This should be used as a last resort for persistent issues. Consult the device's specific instructions for the reset procedure, which often involves holding a small reset button or navigating through the device's menu.

Presupuesto

Información de seguridad

Please read and follow these safety guidelines to ensure safe operation of your Jetpack:

• No exponga el dispositivo al agua ni a la humedad excesiva.
• Evite temperaturas extremas, luz solar directa o fuentes de calor.
• Utilice únicamente cargadores y accesorios aprobados.
• No intente desmontar ni reparar el dispositivo usted mismo. Consulte a personal de servicio técnico cualificado.
• Mantenga el dispositivo alejado de dispositivos médicos, ya que puede interferir con su funcionamiento.

Garantía y soporte

This product is sold as an Amazon Renewed item. Amazon Renewed products are professionally inspected and tested to work and look like new. They are eligible for replacement or refund under the Garantía renovada de Amazon Si no está satisfecho con su compra.

For further assistance or technical support, please refer to Verizon's official support channels or the Amazon Renewed customer service.