1. Másview
The KODAK 35mm Slide and Film Viewer is designed to enlarge and illuminate 35mm slides and film negatives for clear viewing. It features a built-in LED light box for optimal clarity and contrast, and a 3X magnification lens to make small images appear larger without losing sharpness or detail. This device offers both battery operation for portability and an optional DC power input for continuous use.

Image: The KODAK 35mm Slide and Film Viewer showcasing a magnified 35mm slide, illustrating its 3X magnification capability for easy viewEn.
2. Configuración
2.1 Instalación de la batería
For portable use, the viewer requires 4 AA batteries (not included). To install batteries:
- Locate the battery compartment on the underside of the viewes.
- Abra la tapa del compartimiento de la batería.
- Inserte 4 pilas AA, asegurándose de la polaridad correcta (+/-) como se indica dentro del compartimento.
- Cierre bien la tapa del compartimento de la batería.

Image: The KODAK 35mm Slide and Film Viewer with its battery compartment open, showing the placement of four AA batteries for power.
2.2 Optional AC Adapter
For continuous power, the viewer can be connected to a standard 6V AC/DC adapter (sold separately). Locate the DC 6V 500mA input port on the side of the device and plug in the adapter.

Imagen: Un detalle view of the KODAK 35mm Slide and Film Viewer highlighting the DC 6V 500mA port for an optional power adapter.
3. Instrucciones de funcionamiento
3.1 Componentes del dispositivo

Image: A labeled diagram of the KODAK 35mm Slide and Film Viewer, indicating the Magnifying Lens, Film Input, Slide Input, Slide Output, Slide Output Tray, Slide Eject Button, and Power Button.
3.2 Encendido / Apagado
Press the Power Button located on the side of the viewer to turn the LED light on or off.
3.3 Inserting Slides
- Asegúrese de que viewer is powered on.
- Locate the Slide Input slot at the top of the device.
- Gently insert a 35mm slide into the Slide Input slot. The image will be projected onto the viewing pantalla.

Image: A hand demonstrating the insertion of a 35mm slide into the designated slot at the top of the KODAK 35mm Slide and Film Viewes.
3.4 Inserting Film Negatives
- Asegúrese de que viewer is powered on.
- Locate the Film Input slot on the side of the device.
- Carefully slide a strip of film negatives into the Film Input slot. Adjust the film strip to view different frames.
3.5 ViewEn
Look into the magnifying lens to view the illuminated and magnified image of your slide or film negative. The backlit screen is positioned at an upward angle for comfortable viewEn.

Image: The KODAK 35mm Slide and Film Viewer displaying magnified images of both a 35mm slide and a film negative on its illuminated screen.
3.6 Ejecting Media
To remove a slide, press the Slide Eject Button located on the side of the viewer. The slide will drop into the Slide Output Tray at the bottom.
Video: Official KODAK video demonstrating the features and ease of use of the 35mm Slide and Film Viewer, including inserting and ejecting slides.
Video: Official KODAK video highlighting the battery-powered operation of the 35mm Slide and Film Viewer and its simple slide viewproceso de ing.
4. Mantenimiento
- Limpieza de la lente: Use a soft, dry cloth to gently clean the magnifying lens. Avoid abrasive materials or harsh chemicals.
- Almacenamiento de la batería: Si va a almacenar el dispositivo durante un período prolongado, retire las baterías para evitar fugas y posibles daños.
- Limpieza general: Limpie el exterior del viewer with a soft, damp paño. No sumerja el dispositivo en agua.
5. Solución de problemas
- Sin luz: Check if the batteries are correctly installed and not depleted. If using an AC adapter, ensure it is properly connected and functioning.
- Imagen borrosa: Ensure the slide or film negative is inserted correctly and is flat against the light source. The device has a fixed 3X magnification; no focus adjustment is available.
- Slide Stuck: Gently press the eject button multiple times. If a slide is still stuck, carefully remove it manually to avoid damage.
6. Especificaciones
| Dimensiones del producto | 6.5 x 3 x 6 pulgadas (16.5 x 7.6 x 15.2 cm) |
| Peso del artículo | 1 libras (0.45 kg) |
| Número de modelo | RODESV25 |
| Aumento | 3X |
| Fuente de luz | LED (Natural White 6000K) |
| Fuente de poder | 4 AA Batteries (not included) or DC 6V 500mA Adapter (sold separately) |
| Medios compatibles | 35mm Slides, Film Negatives |

Image: The KODAK 35mm Slide and Film Viewer with its physical dimensions clearly marked for reference.
7. Garantía y soporte
For warranty information and customer support, please refer to the documentation included with your product or visit the official KODAK webSitio. Conserve su recibo de compra como comprobante de compra para cualquier reclamación de garantía.





