Introducción
Thank you for choosing the Sunco LED Wraparound Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.
Información de seguridad
- ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la alimentación desde el fusible o disyuntor antes de realizar cualquier instalación o mantenimiento.
- Este producto debe ser instalado de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y el funcionamiento del producto y los peligros involucrados.
- Asegúrese de que el volumen de suministrotage is compatible with the fixture (120-277V).
- No manipule cables bajo tensión.
- No modifique el dispositivo. Cualquier modificación podría anular la garantía y crear riesgos de seguridad.
- Adecuado para damp Ubicaciones.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- LED Wraparound Shop Light Fixture (2 units for 2-pack)
- Herrajes de montaje
- Linking Cables (for connecting multiple fixtures)
- Manual de instrucciones
Presupuesto
| Número de modelo | SHW-40W-5K-2PK |
| Consumo de energía | 40 vatios |
| Salida de luz | 3500 lúmenes |
| Temperatura de color | Luz diurna de 5000 K |
| Volumentage | 120-277 V |
| Dimensiones | 48" de largo x 5.35" de ancho x 2.36" de alto |
| Ángulo del haz | 110 grados |
| CRI | 80+ |
| Tipo de instalación | Flush Mount / Hardwired |
| Características especiales | Prismatic Lens, Linkable (up to 8 units), Non-Dimmable |
| Certificaciones | ETL |
Instrucciones de instalación
This fixture is designed for direct surface mounting to the ceiling. Always ensure power is disconnected before starting installation.
- Prepare el accesorio: Carefully remove the diffuser (Part B) from the lamp base (Part A) to access the wiring and mounting points.
- Monte el accesorio: Posiciona la lamp base against the ceiling where you intend to install it. Mark the mounting holes. Use appropriate mounting hardware (screws, anchors) to securely attach the lamp base to the ceiling.
- Alambrado: Bring the electrical supply wires from the junction box to the fixture. Connect the wires according to local electrical codes: Black to Black (Live), White to White (Neutral), Green/Bare Copper to Green (Ground). Ensure all connections are secure with wire nuts.
- Replace Diffuser: Once wiring is complete and secure, carefully reattach the diffuser to the lamp base. Ensure it snaps firmly into place along both sides.
Vinculación de múltiples accesorios
These fixtures are linkable, allowing you to connect up to 8 units from a single power source. Use the provided linking cables or flush linking connectors to connect fixtures end-to-end. Ensure the total wattagLa cantidad de luminarias conectadas no excede la capacidad del circuito.
Operación
Once properly installed and powered, the Sunco LED Wraparound Shop Light will provide instant-on, flicker-free illumination. This fixture is non-dimmable and operates at a 5000K Daylight color temperature, designed to mimic natural daylight for enhanced visibility and alertness.
Mantenimiento
The Sunco LED Wraparound Shop Light is designed for long-lasting performance with minimal maintenance. The integrated LED design means there are no bulbs to replace.
- Limpieza: Ensure power is off before cleaning. Wipe the fixture and diffuser with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or optical components.
- Inspección: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and contact a qualified electrician or Sunco Lighting support.
Solución de problemas
If you experience issues with your Sunco LED Wraparound Shop Light, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no enciende | Sin suministro de energía; cableado suelto; artefacto defectuoso. | Check circuit breaker/fuse. Ensure all wire connections are secure. If problem persists, contact Sunco support. |
| La luz es tenue o parpadea | Incompatible dimmer switch (fixture is non-dimmable); Loose wiring; Power fluctuation; Fixture nearing end of life. | Ensure no dimmer switch is used. Check wiring connections. If dimming occurs after extended use (e.g., 1.5-2 years), it may indicate a component issue. Contact Sunco support for warranty assistance. |
| Only some linked lights are working | Loose linking cable connection; Faulty individual fixture in the chain. | Check all linking cable connections. Isolate the non-working fixture to determine if it's an individual unit issue. |
Si los pasos de solución de problemas no resuelven el problema, comuníquese con el servicio de atención al cliente de Sunco Lighting.
Garantía y soporte
Sunco Lighting stands behind the quality of its products. This LED Wraparound Shop Light comes with a Protección de 7 año warranty. For warranty claims, technical assistance, or any questions regarding your product, please contact our knowledgeable support specialists.
Información del contacto: Please refer to the Sunco Lighting websitio o su documentación de compra para obtener los datos de contacto más actualizados.
