1. Introducción
Thank you for choosing the Ultimate Speed Battery and Alternator Tester, Model 296998. This device is designed to accurately assess the charge status of 6V and 12V vehicle batteries and evaluate the performance of vehicle alternators. Please read this manual thoroughly before use to ensure safe and effective operation.
2. Instrucciones de seguridad
Observe siempre las siguientes precauciones de seguridad para evitar lesiones o daños al dispositivo y al vehículo:
- Protección ocular: Utilice siempre protección ocular adecuada cuando trabaje con baterías de vehículos.
- Ventilación: Asegúrese de que haya una ventilación adecuada al probar las baterías, ya que pueden emitir gases explosivos.
- Evite las chispas: Do not create sparks or flames near the battery.
- Polaridad correcta: Conecte el probador clamps to the correct battery terminals (red to positive, black to negative). Incorrect connection can damage the device or vehicle.
- Protección contra cortocircuitos: The device features short-circuit protection, but always handle with care.
- Niños: Mantenga el dispositivo fuera del alcance de los niños.
- Humedad: No exponga el dispositivo a la lluvia o humedad excesiva.
3. Producto terminadoview
The Ultimate Speed Battery and Alternator Tester is a compact and easy-to-use diagnostic tool. It features an LED display for clear indication of test results.
Componentes:
- Main Tester Unit with LED Indicators
- Rojo Positivo Clamp
- Cl negativo negroamp
- Integrated Cable (approx. 80 cm length)
Características principales:
- Tests 6V and 12V batteries
- Tests alternator performance
- LED display for easy reading
- Protección contra cortocircuitos
- Magnetic back for convenient placement (approx. 12 x 3.1 x 1.6 cm)
4. Configuración
The Ultimate Speed Battery and Alternator Tester is ready for use out of the box. No assembly or additional power source is required as it is battery-powered by the vehicle's battery.
- Asegúrese de que el encendido del vehículo esté apagado y todos los accesorios apagados.
- Localice la batería del vehículo.
- Asegúrese de que los terminales de la batería estén limpios y libres de corrosión para obtener lecturas precisas.
5. Instrucciones de funcionamiento
5.1. Battery Charge Status Test
- Conectar el rojo clamp hacia positivo (+) terminal de la batería.
- Conectar el negro clamp hacia negativo (-) terminal de la batería.
- The LED indicators on the tester will illuminate to show the battery's charge status. Refer to the labels on the device for interpretation (e.g., "Full," "Medium," "Low," "Recharge").

Figure 1: Ultimate Speed Battery and Alternator Tester connected to a vehicle battery. The LED indicators show the battery's current status.
5.2. Alternator Performance Test
- With the tester still connected to the battery (red to positive, black to negative), start the vehicle's engine.
- Allow the engine to run at idle.
- Observe the LED indicators related to alternator performance. These will typically indicate if the alternator is charging correctly, overcharging, or undercharging.
- Consult your vehicle's service manual for expected alternator voltagy rangos.
6. Mantenimiento
The Ultimate Speed Battery and Alternator Tester requires minimal maintenance.
- Limpieza: Limpie el dispositivo con un paño suave y seco después de cada uso. No utilice limpiadores abrasivos ni disolventes.
- Almacenamiento: Store the tester in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the clamps are not touching each other during storage.
- Inspección de cables: Periodically check the cables and clamps for any signs of damage, wear, or corrosion. Do not use the device if the cables or clamps están dañados.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| No LEDs illuminate when connected. |
|
|
| Lecturas inconsistentes. |
|
|
8. Especificaciones
| Marca: | Máxima velocidad |
| Número de modelo: | 296998 |
| Tipo de producto: | Electric Circuit Testing Device |
| Baterías compatibles: | 6V and 12V Car and Motorcycle Batteries |
| Fuente de energía: | Alimentado por batería (de la batería del vehículo) |
| Tipo de medida: | Multímetro |
| Especificaciones compatibles: | EN 61010-1 |
| Longitud del cable: | Aproximadamente 80 cm |
| Tester Dimensions (approx.): | 12 x 3.1 x 1.6 cm |
9. Garantía y soporte
Specific warranty information is not provided in the product details. Please refer to your purchase documentation or contact the retailer for details regarding warranty coverage and customer support for your Ultimate Speed Battery and Alternator Tester.





