1. Información de seguridad
Please read and understand all instructions before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or fatal. All wiring connections must be in accordance with local and national electrical codes.
- ADVERTENCIA: To avoid electric shock, disconnect power at the circuit breaker before installation.
- Este accesorio está diseñado únicamente para uso en interiores.
- Asegúrese de que la superficie de montaje pueda soportar el peso del accesorio.
- No conecte este dispositivo a un sistema eléctrico sin conexión a tierra.
- Consulte a un electricista calificado si no está seguro acerca del proceso de instalación.
2. Contenido del paquete
Verifique que todos los componentes estén presentes antes de continuar con la instalación.
Image: The VAXCEL Alto 6-Light LED Ceiling Spot Light, showcasing its brushed nickel finish and six adjustable spot heads on a linear track.
- Fixture body with 6 adjustable spot heads
- Mounting hardware (screws, wire nuts, mounting plate)
- 6 x 7-watt LED GU10 bulbs
- Manual de instrucciones
Imagen: Un primer plano view of one of the fixture's spot heads, clearly showing an LED GU10 bulb installed, with an arrow pointing to the bulb and text "LED Bulb Included".
3. Configuración e instalación
Professional installation is recommended. Ensure power is OFF at the circuit breaker before starting.
- Prepare la superficie de montaje: Ensure the electrical box is securely mounted and can support the fixture's weight.
- Coloque la placa de montaje: Fije la placa de montaje a la caja eléctrica utilizando los tornillos provistos.
- Conexiones de cableado:
- Connect the fixture's ground wire to the supply ground wire (usually bare copper or green).
- Connect the fixture's white wire to the supply neutral wire (white).
- Connect the fixture's black wire to the supply hot wire (black).
- Asegure todas las conexiones con tuercas para cables.
- Monte el accesorio: Carefully align the fixture body with the mounting plate and secure it with the decorative nuts or screws.
- Instalar bombillas: Insert the provided GU10 LED bulbs into each spot head.
- Restaurar energía: Vuelva a encender la energía en el disyuntor.
Image: The VAXCEL Alto 6-Light LED Ceiling Spot Light mounted on a ceiling, demonstrating its appearance in a home setting.
4. Instrucciones de funcionamiento
The VAXCEL Alto C0221 fixture is designed for ease of use and directional lighting.
- Encendido/apagado: Control the light fixture using a standard wall switch connected to the circuit.
- Ajuste de los cabezales de foco: Each spot head can be individually rotated and angled to direct light precisely where needed. The two swing arms also allow for broader light distribution.
- Funcionalidad de atenuación: This fixture is dimmable when used with a compatible LED dimmer wall switch. Ensure your dimmer switch is rated for LED lighting.
Imagen: A view of the VAXCEL Alto 6-Light fixture from below, showing one of the spot heads rotated to illustrate its adjustable nature.
5. Mantenimiento
El mantenimiento regular garantiza un rendimiento óptimo y la longevidad de su dispositivo.
- Limpieza:
- Siempre desconecte la energía antes de limpiar.
- Limpie la lámpara con un paño suave y seco.
- No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar el acabado.
- Reemplazo de bombilla:
- The included LED GU10 bulbs are long-lasting. If replacement is necessary, ensure power is off.
- Deje enfriar las bombillas antes de manipularlas.
- Replace with GU10 LED bulbs of the same wattage (7W) and type for best performance.
6. Solución de problemas
If you experience issues with your VAXCEL Alto C0221 fixture, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende. |
|
|
| La luz parpadea o se atenúa incorrectamente. |
|
|
| El accesorio zumba. |
|
|
If problems persist, contact VAXCEL customer support.
7. Especificaciones
Key technical details for the VAXCEL Alto C0221 6-Light LED Ceiling Spot Light:
| Característica | Detalle |
|---|---|
| Número de modelo | C0221 |
| Dimensiones (An x Al x Pr) | 82 pulgadas x 8 pulgadas x 5 pulgadas |
| Peso | 6.61 libras |
| Material | Aluminio, acero |
| Finalizar | Brushed Nickel and Chrome |
| Tipo de luz | CONDUJO |
| Tipo de bombilla | GU10 (MR16 shape) |
| Quétage (por bombilla) | 7 vatios |
| Brillo total | 3300 lúmenes |
| Temperatura de color | 3000 Kelvin (blanco cálido) |
| Índice de reproducción cromática (IRC) | 90 |
| Volumentage | 120 voltios |
| Regulable | Sí (con regulador LED compatible) |
| Uso en interiores y exteriores | Interior (Damp Calificado) |
| Método de instalación | Ceiling Mounted, Hardwired |
| Certificaciones | ETL |
Image: A technical diagram illustrating the dimensions of the VAXCEL Alto 6-Light fixture, with labels A: 8" and B: 82".
Image: A "Lumens Calculator" chart providing a comparison between traditional incandescent bulb wattage and equivalent LED wattage, along with their respective lumen outputs. This helps understand LED brightness.
8. Garantía y soporte
Información de garantía:
This VAXCEL Alto C0221 fixture comes with a Garantía limitada de 1 años Desde la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso. No cubre daños causados por instalación incorrecta, accidentes, mal uso, abuso o modificaciones no autorizadas.
Atención al cliente:
For technical assistance, warranty claims, or replacement parts, please contact VAXCEL customer service. Refer to the VAXCEL official websitio o su documentación de compra para obtener detalles de contacto.
When contacting support, please have your model number (C0221) and proof of purchase readily available.
