1. Introducción
This user manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your POOLEX Silverline 90 Pool Heat Pump, model PC-SLP090. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of the unit.
2. Información de seguridad
Always adhere to local electrical codes and regulations. Installation must be performed by a qualified professional. Failure to follow these instructions may result in property damage, serious injury, or death.
- Asegúrese de que la fuente de alimentación esté desconectada antes de cualquier mantenimiento o servicio.
- Do not operate the heat pump if any part is damaged or missing.
- Mantenga a los niños y las mascotas alejados de la unidad durante su funcionamiento.
- Una conexión a tierra adecuada es esencial para evitar descargas eléctricas.
- No bloquee las rejillas de entrada y salida de aire.
3. Producto terminadoview y componentes
The POOLEX Silverline 90 is a high-performance heat pump designed for heating swimming pools. It features a Mitsubishi compressor and a double-spiral titanium exchanger for efficient heat transfer.
Figura 3.1: Frente view of the POOLEX Silverline 90 heat pump, showing the main unit with the POOLEX Silverline logo and various indicators. This image illustrates the compact design and primary external features of the heat pump.
Figure 3.2: The POOLEX Silverline 90 heat pump, highlighting its compatibility with pools up to 45m³ and the integrated Touch & Go control system. This image emphasizes the user-friendly interface and capacity suitability.
Figure 3.3: Key features of the POOLEX Silverline 90 heat pump, including 6 capacities up to 85m³, titanium exchanger, power range of 5.5 to 18 kW, and anti-corrosion properties. This graphic summarizes the technical advantages of the unit.
Figure 3.4: Accessories included with the POOLEX Silverline 90 heat pump: maintenance cover, anti-vibration support kit, 10-meter extension cable, condensate drainage hose, and 50mm PVC connectors. This image details the complete package for installation and maintenance.
Figure 3.5: The POOLEX Silverline heat pump's energy efficiency, demonstrating up to 80% savings compared to traditional heating methods. This image highlights the economic benefit of using the heat pump.
Figure 3.6: The POOLEX Silverline 90 heat pump uses R410 ecological refrigerant, emphasizing its environmental friendliness. This image points out the type of refrigerant used and its eco-conscious design.
Figure 3.7: The POOLEX Silverline heat pump offers 6 capacities for pools up to 85m³, with a power range of 5.5 to 18 kW. This image illustrates the versatility and scalability of the heat pump series.
4. Configuración e instalación
4.1 Selección del sitio
Choose a well-ventilated outdoor location, away from direct sunlight and heat sources. Ensure sufficient clearance around the unit for proper airflow (minimum 50cm from walls or other obstructions). The ground must be level and capable of supporting the unit's weight (49 kg).
4.2 Conexión de fontanería
- Connect the heat pump to your pool's filtration system after the filter and before any chemical injection points.
- Use the provided PVC connectors (Ø 50mm) for water inlet and outlet.
- Asegúrese de que todas las conexiones sean estancas para evitar fugas.
- Install a bypass valve system to allow for maintenance without draining the pool.
4.3 Conexión eléctrica
Electrical installation must be performed by a certified electrician in accordance with local regulations.
- The unit requires an electrical power supply (Type: Electric).
- Ensure the circuit is protected by a suitable circuit breaker and residual current device (RCD).
- Conecte a tierra correctamente la unidad.
- Connect the wired control extension (10m) if using the remote panel.
4.4 Puesta en marcha inicial
- Asegúrese de que la bomba de la piscina esté funcionando y que el agua fluya a través de la bomba de calor.
- Turn on the power supply to the heat pump.
- Set the desired water temperature using the LCD control panel.
- Allow several hours or days for the pool water to reach the set temperature, depending on initial water temperature and ambient conditions.
5. Instrucciones de funcionamiento
5.1 Control Panel (Touch & Go)
The heat pump is equipped with an LCD control panel featuring Touch & Go technology for easy operation. Refer to the specific instructions provided with the control panel for detailed navigation.
5.2 Ajuste de temperatura
Use the up/down arrows on the control panel to adjust the desired pool water temperature. The unit will automatically operate to maintain this temperature.
Modos de funcionamiento de 5.3
The heat pump primarily operates in heating mode. It will automatically turn on when the pool water temperature drops below the set point and turn off once the set point is reached.
5.4 Wi-Fi Module (Optional)
An optional Wi-Fi module is available for remote control and monitoring. Consult the Wi-Fi module's separate manual for installation and operation instructions.
6. Mantenimiento
6.1 Limpieza Regular
- Keep the area around the heat pump clear of debris, leaves, and other obstructions.
- Clean the evaporator coil regularly with a soft brush or low-pressure water to ensure efficient airflow.
- Limpie el exterior casing con anuncioamp paño.
6.2 Preparación para el invierno
Before winter or prolonged periods of non-use, it is essential to properly winterize the heat pump:
- Desconecte la fuente de alimentación.
- Drain all water from the heat pump's plumbing system to prevent freezing damage.
- Cover the unit with the provided maintenance cover or a suitable protective cover.
6.3 Drenaje de condensado
Ensure the condensate drainage hose is clear and properly routed to allow water to drain away from the unit's base.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Heat pump not starting | No power; circuit breaker tripped; low water flow. | Check power supply; reset circuit breaker; ensure pool pump is running and filter is clean. |
| Calefacción insuficiente | Ambient temperature too low; dirty evaporator coil; incorrect temperature setting; undersized unit for pool volume. | Heat pump efficiency decreases in cold weather; clean coil; verify temperature setting; ensure unit matches pool size (40-50m³ for this model). |
| Ruido inusual | Componentes sueltos; obstrucción del ventilador; problema del compresor. | Check for loose parts; clear any obstructions from fan; if compressor noise persists, contact qualified technician. |
| Fuga de agua | Loose plumbing connections; condensate drainage issue. | Tighten connections; ensure condensate hose is clear and properly routed. Note: Condensate drainage is normal operation. |
For issues not listed or if problems persist, contact a qualified service technician or POOLEX customer support.
8. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | PC-SLP090 |
| Marca | POOLEX (Manufacturer: Poolstar) |
| Potencia de salida | 9 kW |
| Volumen de piscina recomendado | 40 to 50 m³ (up to 110 m³ compatible) |
| Tipo de compresor | High-performance Mitsubishi compressor |
| Tipo de intercambiador | Double-spiral titanium exchanger (Twisted Tech) |
| COP (26/26 conditions) | > 6 |
| Dimensiones (L x An x Al) | 92.7 x 34 x 63.6 cm |
| Peso | 49 kilogramos |
| Tipo de energía | Eléctrico |
| Refrigerante | R410 (Ecológico) |
| Panel de control | LCD with Touch & Go technology |
| Compatibilidad | Compatible with all pool types, including salt treatment. |
9. Garantía y soporte
For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Poolstar webSitio. Conserve su comprobante de compra para reclamaciones de garantía.
Included accessories: Anti-vibration support kit, PVC connectors (Ø 50mm 1½''), condensate drainage hose, multi-language user manual, wired control extension (10m).
