1. Introducción
The FITNATE LED Baby Car Mirror is designed to provide parents with a clear and safe view of their infant in a rear-facing car seat. Featuring 360-degree adjustability, a shatterproof design, and an LED nightlight system with remote control, this mirror enhances safety and convenience during travel. Please read this manual thoroughly before installation and use to ensure proper function and safety.
2. Producto terminadoview
2.1 Características principales
- Rotación de 360 grados: The mirror offers full maneuverability with a 360-degree pivot, allowing for easy adjustment to achieve a clear view de su hijo.
- Shatterproof and ABS Design: Constructed from acrylic and shatterproof glass with an ABS material frame, ensuring environmental safety and durability.
- Adjunto seguro: Features strong, anti-UV material straps and an ABS anthropometric design buckle for sturdy and reliable installation on the headrest.
- LED Nightlight System: Six gentle LED lights on two sides of the mirror provide illumination for nighttime viewing without disturbing your baby.
- Mando a distancia: Easily activate and deactivate the LED nightlight from the driver's seat using the included remote control.
2.2 Contenido del paquete
- FITNATE LED Baby Car Mirror
- Mando a distancia
- 2 Car Sun Visors
- Small Screwdriver (for remote battery compartment)

3. Configuración e instalación
3.1 Montaje del espejo
- Position the mirror on the headrest of the rear seat, ensuring it is centered and at an appropriate height for visibility from the driver's seat.
- Wrap the adjustable straps around the headrest.
- Secure the buckles and tighten the straps to ensure the mirror is firmly attached and does not wobble.
- Adjust the mirror's angle using its 360-degree rotation feature to achieve the desired view de tu bebe

3.2 Attaching the Remote Control
- Open the battery compartment of the remote control using the provided small screwdriver. Insert the required batteries (not included, typically 2x AAA).
- Attach the remote control to a convenient location, such as your car's sun visor, using its clip or adhesive backing (if applicable). Ensure it is within easy reach from the driver's seat.

3.3 vídeos de instalación
4. Instrucciones de funcionamiento
4.1 Adjusting the Mirror
The mirror is designed with a 360-degree rotating ball joint. Gently pivot the mirror to adjust its angle until you have a clear and unobstructed view of your baby from your driving position. Ensure the mirror is stable after adjustment.

4.2 Using the LED Nightlight
To activate the LED nightlight system, press the button on the remote control. The gentle lights will gradually illuminate, allowing you to observe your baby in low-light conditions without causing disturbance. Press the button again to turn off the lights.

5. Mantenimiento
- Limpieza: Limpie la superficie del espejo con un paño suave.amp cloth. Avoid abrasive cleaners or solvents that could damage the mirror or frame.
- Reemplazo de batería (control remoto): If the LED nightlight does not respond to the remote control, the batteries may need replacement. Use the small screwdriver to open the battery compartment and replace with new batteries (typically 2x AAA).
- Inspección de correa: Periodically check the straps and buckles for any signs of wear or damage. Ensure they remain securely fastened to the headrest.
6. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Mirror does not stay in place or vibrates excessively. | Straps are not tight enough; mirror pivot is loose. | Ensure straps are securely tightened around the headrest. Adjust the pivot point to a stable position. |
| LED nightlight does not turn on/off with remote. | Las baterías del control remoto están agotadas o insertadas incorrectamente; el control remoto está fuera de alcance. | Replace remote batteries, ensuring correct polarity. Ensure remote is pointed towards the mirror and within reasonable range. |
| La luz es demasiado brillante o demasiado tenue. | Condiciones de iluminación ambiental. | The LED nightlight has a fixed brightness. Adjust car's interior lighting or use car sun visors to manage ambient light. |
7. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | BB0020-AGP1 |
| Marca | AJUSTE |
| Dimensiones (L x An x Al) | 11.42 x 3.15 x 8.27 pulgadas |
| Peso del artículo | 1.39 libras |
| Material | Acrilonitrilo butadieno estireno (ABS) |
| Tipo de montaje | Soporte para reposacabezas |
| Características especiales | Adjustable, Dimmable, Lighted, Lightweight, Night Vision |
| Curvatura de la lente | Convexo |
| Tipo de ajuste | Ajuste universal |
8. Garantía y soporte
FITNATE offers a replacement policy for quality issues within 30 days of purchase. If you encounter any problems with the quality of your baby car mirror, please contact us directly via email for assistance. Our customer support team is available to help with any questions or concerns regarding your product.




