Introducción
This manual provides detailed instructions for the safe and proper installation and use of your PERLESMITH PSML1-E TV Wall Mount. Please read all instructions carefully before beginning installation. If you have any questions, contact PERLESMITH customer support.
Información de seguridad
ADVERTENCIA: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding your warranty. Do not install this product on plasterboard, hollow walls, drywall, or soft walls. Only install on solid concrete walls, brick walls, or solid wood stud walls.
- Asegúrese de que la superficie de montaje pueda soportar de forma segura el peso combinado del soporte y el televisor.
- No exceda la capacidad máxima de peso de 52 kg (114 lbs).
- Este soporte está diseñado para televisores de entre 26 y 75 pulgadas.
- Utilice equipo de seguridad adecuado durante la instalación, incluida protección para los ojos.
- Utilice siempre un detector de vigas para localizar con precisión las vigas de madera.
- Si no está seguro de alguna parte de la instalación, busque asistencia profesional.
Image: Diagram highlighting the robust construction and 52kg weight capacity of the PERLESMITH TV mount, featuring secure dual hooks and a 3-layer solid steel plate.
Comprobación de compatibilidad
Before installation, verify the following:
- Tamaño de TV: Su televisor debe tener entre 26 y 75 pulgadas.
- Peso del televisor: Su televisor no debe pesar más de 52 kg (114 lbs).
- Patrón VESA: Check the four mounting holes on the back of your TV. The VESA pattern (horizontal x vertical) must be within the range of 75x75 mm to 400x400 mm. Compatible VESA patterns include: 75x75, 100x100, 200x100, 200x200, 200x300, 200x400, 300x200, 300x300, 400x200, 400x300, 400x400 mm.
- Tipo de pared: The mount is suitable for solid concrete walls, brick walls, or solid wood stud walls. Do NOT install on plasterboard, hollow walls, drywall, or soft walls.
Image: Diagram illustrating how to check TV VESA pattern, weight, size, and suitable wall types for installation.
Image: VESA compatibility diagram, illustrating the range of VESA patterns supported by the mount, from 75x75mm up to 400x400mm.
Contenido del paquete
Verify that all components are present and undamaged before proceeding with installation. If any parts are missing or defective, contact PERLESMITH customer support.
Image: Main components of the PERLESMITH TV Wall Mount, showing the wall plate and the two vertical TV brackets.
El paquete normalmente incluye:
- Placa de pared
- Soportes de TV (2 piezas)
- Assorted TV Screws (M4, M6, M8)
- Espaciadores y arandelas
- Wall Mounting Hardware (Lag bolts, concrete anchors)
- Level (for some kits)
- Manual de instrucciones
Configuración e instalación
Follow these steps for a secure installation. A quick installation can be completed in approximately 15 minutes with proper tools and preparation.
Paso 1: coloque los soportes de TV en el televisor
- Coloque con cuidado el televisor boca abajo sobre una superficie suave y limpia para evitar rayones.
- Identify the correct diameter and length of screws for your TV's VESA mounting holes. Use spacers if the TV back is uneven or if cables need clearance.
- Attach the two vertical TV brackets to the back of your TV using the selected screws and washers. Ensure the brackets are centered and securely tightened. The hooks on the brackets should face downwards.
Image: Step 1 of the installation process, showing the TV brackets being attached to the back of the television.
Paso 2: Monte la placa de pared en la pared
- Determine the desired height for your TV. Mark the location for the wall plate on the wall.
- For wood stud installation: Use a stud finder to locate the center of the wood studs. Mark the drilling points. Drill pilot holes (recommended size specified in manual, typically 5.5mm/7/32"). Secure the wall plate using lag bolts and washers.
- For concrete/brick wall installation: Use the wall plate as a template to mark drilling points. Drill holes (recommended size specified in manual, typically 10mm/3/8"). Insert concrete anchors into the drilled holes. Secure the wall plate using lag bolts and washers.
- Use a level to ensure the wall plate is perfectly horizontal before tightening all bolts.
Paso 3: Cuelgue el televisor en la placa de pared
- Con ayuda, levante con cuidado el televisor con los soportes adjuntos.
- Align the hooks on the TV brackets with the top edge of the wall plate. Gently lower the TV, ensuring the brackets engage securely with the wall plate.
- Engage the safety locks (if present) on the bottom of the TV brackets to prevent accidental dislodgement.
Image: A person completing the final step of hanging the TV onto the wall mount, illustrating the quick installation process.
Image: Detail of the safety lock mechanism, which secures the TV brackets to the wall plate.
Imagen: Primer plano view of the anti-drop design, ensuring the TV remains securely attached to the mount.
Instrucciones de funcionamiento
The PERLESMITH PSML1-E is a fixed TV wall mount. Once installed, the TV will remain in a static position, close to the wall (approximately 30 mm distance). This design provides a sleek, low-profile apariencia.
Image: A television mounted on the wall, demonstrating the minimal 30mm distance from the wall for a low-profile mirar.
While the mount is fixed, some models may allow for a slight tilt adjustment up to 8 degrees. Refer to your specific product's features for tilt adjustment capabilities. To adjust, loosen the tilt bolts on the TV brackets, set the desired angle, and re-tighten the bolts securely.
Mantenimiento
El mantenimiento regular garantiza la longevidad y seguridad de su soporte de pared para TV.
- Inspección periódica: Annually check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Limpieza: Limpie el soporte con un paño suave y seco. Evite el uso de limpiadores abrasivos o disolventes.
- Verificación de daños: Inspect the mount for any signs of wear, corrosion, or damage. If damage is found, do not use the mount and contact customer support.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El televisor no está nivelado después de la instalación. | La placa de pared no está nivelada durante la instalación. | Carefully remove the TV. Loosen the wall plate bolts, adjust with a level, and re-tighten. Re-hang the TV. |
| El televisor no encaja en el soporte. | Patrón VESA o tamaño/peso del televisor incorrectos. | Verify TV specifications against the mount's compatibility (VESA, size, weight). Ensure correct screws and spacers are used. |
| El monte se siente inestable. | Improper wall installation or loose fasteners. | Immediately remove the TV. Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure installation on a suitable wall type (solid concrete, brick, or wood stud). If unsure, consult a professional. |
| Cables are pinched or difficult to connect. | Insufficient space between TV and wall. | Ensure spacers are used if needed to provide adequate clearance for cables. Re-route cables carefully. |
Presupuesto
- Modelo: PSML1-E
- Marca: PERLESMITH
- Material: Acero aleado
- Color: Negro
- Tipo de instalación: Montaje en pared
- Tipo de movimiento: Fijado
- Tamaños de televisores compatibles: 26 - 75 pulgadas
- Capacidad máxima de peso: 52 kg (114 libras)
- Compatibilidad VESA: 75x75mm, 100x100mm, 200x100mm, 200x200mm, 200x300mm, 200x400mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm
- Distancia desde la pared: Aproximadamente 30 mm
- Ángulo de inclinación máximo: 8 Degrees (if applicable to specific unit)
- Peso del artículo: 1.12 kilogramos
- Dimensiones del paquete: 43.7 x 11.3 x 4.9 cm
- Código postal: 713721601516
Garantía y soporte
PERLESMITH products are designed for durability and reliability. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official PERLESMITH webSitio. Conserve su recibo de compra como comprobante para reclamaciones de garantía.
