Hongfa HFAVC140

Hongfa Replacement Parts Instruction Manual

For iRobot Roomba 700 Series Robot Vacuums (Models 760, 770, 780, 790)

Brand: Hongfa | Model: HFAVC140

Introducción

This manual provides detailed instructions for the installation and maintenance of Hongfa replacement parts for your iRobot Roomba 700 series robot vacuum cleaner. Regular replacement of these components is essential to maintain optimal cleaning performance and extend the lifespan of your device.

Compatibilidad: This kit is compatible with iRobot Roomba 700 series models including 700, 720, 750, 760, 765, 770, 772, 772e, 774, 775, 776, 776p, 780, 782, 782e, 785, 786, 786p, and 790 vacuum cleaners.

Contenido del paquete

The Hongfa 22-piece replenishment kit includes the following items:

  • 10 x filtros
  • 6 x cepillos laterales
  • 2 x Bristle Brushes
  • 2 x Flexible Beater Brushes
  • 2 x Cleaning Tools
All components of the Hongfa 22-piece replacement kit, including filters, side brushes, bristle brushes, flexible beater brushes, and cleaning tools.

Figura 1: Sobreview of all replacement parts included in the kit.

Configuración e instalación

Follow these steps to replace the components of your iRobot Roomba 700 series vacuum.

1. Replacing the Filters

Filters should be replaced every 2-3 months to maintain cleaning performance.

  1. Retire el depósito de polvo de su Roomba.
  2. Open the dust bin cover and remove the old filter.
  3. Insert a new filter into the designated slot in the dust bin. Ensure it is seated correctly.
  4. Close the dust bin cover and reinsert the bin into the Roomba.
Close-up of a yellow filter with dimensions 1.77 inches by 1.77 inches.

Figura 2: Dimensiones del filtro de reemplazo.

Video 1: Step-by-step guide on how to replace the filter in a Roomba 700 series.

2. Replacing the Side Brush

The side brush helps sweep debris from edges and corners into the cleaning path. Replace it when bristles show wear.

  1. Flip your Roomba over.
  2. Use a screwdriver to remove the screw holding the side brush in place.
  3. Retire el cepillo lateral viejo.
  4. Alinee el nuevo cepillo lateral y fíjelo con el tornillo.
A single three-armed side brush with white bristles and a yellow center.

Figure 3: Replacement side brush.

Video 2: Demonstration of how to replace the side brush on a Roomba 700 series.

3. Replacing the Bristle and Flexible Beater Brushes

These main brushes work together to agitate and lift debris from your floors. Replace them when they appear worn or damaged.

  1. Flip your Roomba over.
  2. Locate the brush guard and release the tabs to open it.
  3. Remove the old bristle brush and flexible beater brush.
  4. Insert the new flexible beater brush first, ensuring the square and hexagonal ends align with their respective slots.
  5. Insert the new bristle brush, aligning its ends similarly.
  6. Close the brush guard until it clicks into place.
Two main brushes: one bristle brush and one flexible beater brush.

Figure 4: Bristle brush and flexible beater brush.

Video 3: Instructions for replacing the main brushes in a Roomba 700 series.

Mantenimiento

Regular cleaning and timely replacement of parts are crucial for your Roomba's performance.

Herramientas de limpieza

The kit includes two cleaning tools to help remove hair and debris from the brushes.

  • Use the red comb-like tool to slide over the bristle brush and cut through tangled hair.
  • The small orange brush can be used to clean dust and debris from filters and other crevices.
A red cleaning tool designed to remove hair from brushes, shown next to a bristle brush.

Figure 5: Red cleaning tool for main brushes.

A small orange cleaning brush with black bristles.

Figure 6: Small orange cleaning brush.

Frecuencia de reemplazo

  • Filtros: Every 2-3 months, or more frequently if you have pets or high traffic.
  • Cepillos laterales: Every 3-6 months, or when bristles are visibly worn or bent.
  • Main Brushes (Bristle & Flexible Beater): Every 6-12 months, or when cleaning performance decreases significantly.

Presupuesto

CaracterísticaDetalle
MarcaHongfa
Información del modeloHFAVC140
Dispositivo compatibleiRobot Roomba 700 series
Material Type (Filters)Filtro HEPA
Peso del artículo1.15 libras
Dimensiones del paquete10 x 8 x 2.2 pulgadas

Solución de problemas

If your Roomba's cleaning performance declines after replacing parts, consider the following:

  • Succión reducida: Ensure filters are clean and correctly installed. A clogged filter can significantly reduce suction power.
  • Poor Debris Pickup: Check that the main brushes (bristle and flexible beater) are free of tangles and installed correctly. Ensure the side brush is spinning freely.
  • Ruidos inusuales: Verify that all brushes are properly seated and not obstructed by debris.
  • Problemas generales de rendimiento: Always ensure genuine or compatible replacement parts are used. Refer to your Roomba's original manual for specific error codes or further troubleshooting steps.

Garantía y soporte

For warranty information regarding your Hongfa replacement parts, please refer to the product packaging or contact the seller directly. Keep your proof of purchase for any warranty claims.

For general support or further assistance with your iRobot Roomba, please consult the official iRobot website or your Roomba's original user manual.

Documentos relacionados - HFAVC140

Preview Manual de usuario del módulo de control de carrocería (BCM) de Xiamen Hongfa - HF3758/12
Manual de usuario oficial del módulo de control de carrocería (BCM) Xiamen Hongfa, modelo HF3758/12. Detalles del sistema.view, parámetros, funciones y apariencia del componente electrónico automotriz.
Preview Contactores de CA Hongfa serie UEC1: catálogo de productos y especificaciones técnicas
Catálogo completo que detalla los contactores de CA de la serie UEC1 de Hongfa, incluidos los productosview, características técnicas, información para pedidos, durabilidad eléctrica, accesorios y dimensiones de instalación.
Preview Manual de usuario del llavero Hongfa - Sistema completoviewParámetros y funciones
Manual de usuario completo para el llavero Hongfa, que detalla el sistema.view, parámetros técnicos, funciones del sistema, apariencia física, información del producto y declaraciones de cumplimiento normativo (FCC, IC).
Preview Hoja de datos del relé de potencia subminiatura Hongfa HF7520
Especificaciones técnicas, información para pedidos, dimensiones y curvas características del relé de potencia subminiatura Hongfa HF7520, un componente de alto rendimiento para diversas aplicaciones.
Preview Hoja de datos del relé de potencia intermedia subminiatura Hongfa HF46F
Especificaciones técnicas y características del relé de potencia intermedia subminiatura Hongfa HF46F, incluyendo datos de contacto, datos de bobina, clasificaciones de aprobación de seguridad y curvas características.
Preview 宏发 HF115FK-T 小型大功率继电器 数据手册
宏发 HF115FK-T 小型大功率继电器的数据手册,详细介绍了产品特性、技术规格(触点参数、线圈参数、性能参数)、安全认证、订购信息、图示说明(外形图、接线图、安装孔尺寸)以及性能曲线。适用于工业和电子应用。