Manual de instrucciones básico del avión RC E-flite Carbon-Z Cessna 150 2.1M BNF

1. Producto terminadoview

The E-flite Carbon-Z Cessna 150 2.1M BNF Basic is a large-scale remote control aircraft designed for sport flying. This model offers a wide flight envelope, suitable for various flying styles. It incorporates scale details and features for an enhanced experience.

Características principales:

• Large sport-scale model suitable for diverse flight maneuvers.
• Wide flight envelope, accommodating both gentle and aggressive flying.
• Scale details including LED lights, functional flaps, and wheel pants.
• Designed for field assembly without requiring tools.
• Innovative hands-free servo connection system for simplified setup.

Figura 1.1: Frente view of the E-flite Carbon-Z Cessna 150 2.1M RC Airplane.

2. Información de seguridad

ADVERTENCIA: Lea el manual de instrucciones COMPLETO para familiarizarse con las características del producto antes de operarlo. Si no se opera el producto correctamente, se pueden producir daños en el producto, en la propiedad personal y lesiones graves. Este es un producto sofisticado para aficionados. Debe operarse con precaución y sentido común y requiere cierta habilidad mecánica básica. Si no se opera este producto de manera segura y responsable, se pueden producir lesiones o daños en el producto o en otra propiedad. Este producto no está diseñado para que lo usen niños sin la supervisión directa de un adulto. No lo use con componentes incompatibles ni altere este producto de ninguna manera que no sea la proporcionada por las instrucciones proporcionadas por Horizon Hobby, LLC. Este manual contiene instrucciones de seguridad, operación y mantenimiento. Es esencial leer y seguir todas las instrucciones y advertencias del manual, antes del ensamblaje, la configuración o el uso, para operar correctamente y evitar daños o lesiones graves.

3. ¿Qué hay en la caja?

• Carbon-Z Cessna 150 BNF Basic RC Airplane

Note: Additional components such as a compatible Spektrum DSMX/DSM2 transmitter, flight battery, and charger are required and sold separately.

4. Configuración y montaje

4.1 Conjunto del ala

1. Carefully slide each wing panel onto the wing tube until it is fully seated against the fuselage.
2. Ensure the hands-free servo connections engage properly.
3. Secure each wing panel using the provided fasteners or pins, as indicated in the manual.

Figure 4.1: Detail of component assembly, showing a pin being inserted.

4.2 Instalación del tren de aterrizaje

Attach the main landing gear and tail wheel assembly according to the diagrams. Ensure all connections are secure. The model features wheel pants for scale appearance.

4.3 Conexiones de servo

The Carbon-Z Cessna 150 utilizes an innovative hands-free servo connection system. When assembling the wings, ensure the servo connectors align and engage automatically. Verify all control surfaces move freely and correctly after assembly.

Figure 4.2: Detail of the hands-free servo connection system.

4.4 Battery Installation and Binding

1. Install the recommended flight battery (sold separately) into the designated battery compartment. Secure it to prevent movement during flight.
2. Follow the instructions for your Spektrum DSMX/DSM2 compatible transmitter to bind it with the aircraft's receiver. Refer to your transmitter's manual for specific binding procedures.
3. After binding, perform a control surface test to ensure all controls (ailerons, elevator, rudder, throttle) respond correctly to transmitter inputs.

5. Instrucciones de funcionamiento

5.1 Comprobaciones previas al vuelo

• Asegúrese de que la batería de vuelo esté completamente cargada e instalada de forma segura.
• Verify all control surfaces move freely and in the correct direction relative to transmitter inputs.
• Check propeller for any damage or looseness.
• Confirm the transmitter battery is adequately charged.
• Perform a range check of your radio system before the first flight of the day.

5.2 Despegue

Place the aircraft on a smooth surface facing into the wind. Gradually advance the throttle. Apply slight up-elevator as speed increases to lift off. Maintain a steady climb rate.

5.3 Vuelo

The Carbon-Z Cessna 150 is designed for stable flight characteristics. Use the ailerons for roll control, elevator for pitch, and rudder for yaw. Adjust throttle to control speed. Utilize flaps for slower flight and improved lift during takeoff and landing, if desired.

Figure 5.1: The Carbon-Z Cessna 150 in stable flight.

5.4 Aterrizaje

Approach the landing strip into the wind. Reduce throttle and gradually deploy flaps if using them. Maintain sufficient airspeed for control. Flare gently by applying up-elevator just before touchdown to achieve a smooth landing.

6. Mantenimiento

6.1 Inspección posterior al vuelo

• Inspeccione la estructura del avión para detectar posibles daños, grietas o componentes sueltos.
• Check all control linkages and hinges for wear or looseness.
• Examine the propeller and spinner for damage. Replace if necessary.
• Ensure landing gear is secure and undamaged.

6.2 Limpieza y almacenamiento

Limpie la aeronave con un paño suave y seco.amp cloth. Avoid using harsh chemicals. Store the model in a cool, dry place, away from direct sunlight and extreme temperatures, to preserve its materials and electronics.

7. Solución de problemas

8. Especificaciones

Figure 8.1: The Carbon-Z Cessna 150 demonstrating its substantial size.

9. Información de garantía

This product is covered by a limited warranty provided by Horizon Hobby, LLC. For detailed warranty terms and conditions, please refer to the official Horizon Hobby website or contact their customer support. Proof of purchase may be required for warranty claims.

10. Atención al cliente

For technical assistance, spare parts, or further information regarding your E-flite Carbon-Z Cessna 150, please visit the official E-flite or Horizon Hobby website. You can also contact their customer service department directly for support.

E-flite Store: Visit the E-flite Store on Amazon