Introducción
Thank you for choosing the LEKATO 9V AC/DC Pedal Power Supply Adapter. This adapter is designed to provide stable and reliable power to most instrument pedals and other 9-volt battery devices, ensuring consistent, battery-free performance. This manual provides essential information for the proper setup, operation, and maintenance of your power supply.
Image: The LEKATO 9V AC/DC Pedal Power Supply Adapter.
Características principales
- Stable Power Conversion: Converts AC wall power to 9-Volt DC, suitable for a wide range of guitar effect pedals and 9-volt devices.
- Fabricación de calidad: Produced in a state-of-the-art facility, adhering to stringent quality controls for durability and performance.
- Rendimiento consistente: Ensures reliable, battery-free operation for your devices.
- Amplia compatibilidad: Designed for broad compatibility with various effect pedals. Refer to your device's specifications for exact power requirements.
- Professional Noise Isolation: Engineered to minimize unwanted noise, providing a clean power source for your audio equipment.
- Protecciones de seguridad: Includes over-charge, short circuit, temperature, over-voltage, over-current, and overload protection for enhanced safety.
Image: LEKATO Pedal Power Supply highlighting its multiple safety features.
Instrucciones de instalación
- Desempaque el adaptador: Carefully remove the LEKATO 9V AC/DC Pedal Power Supply Adapter from its packaging.
- Verifique la compatibilidad del dispositivo: Before connecting, ensure your device requires a 9V DC power input with a center-negative polarity. The adapter features a 5.5mm*2.1mm barrel connector.
- Conectar al dispositivo: Insert the barrel connector of the power supply into the DC input jack of your effect pedal or 9-volt device.
- Enchufe al tomacorriente: Plug the AC prongs of the adapter into a standard wall power outlet (100-240V AC, 50/60Hz).
- Encendido: Once connected, your device should receive power. Observe any indicator lights on your pedal to confirm it is powered on.
Image: Ensure your device requires central negative polarity (5.5mm*2.1mm barrel connector).
Image: The adapter features an extended 5.0 feet cord for flexible placement.
Instrucciones de funcionamiento
The LEKATO 9V AC/DC Pedal Power Supply Adapter is designed for simple plug-and-play operation. Once connected as per the setup instructions, your compatible device will receive continuous power.
- Potencia de salida: The adapter provides a stable 9V DC output with 1000mA (1A) current, suitable for devices requiring up to 1A.
- Vol de entradatage: Compatible with universal input voltage from 100-240V AC, 50/60Hz, making it suitable for international use with appropriate plug adapters (not included).
- Reducción de ruido: The adapter incorporates professional noise isolation to ensure a clean audio signal from your pedals.
Image: Power Watt Compatibility details for the adapter.
Image: Wide compatibility with various effect pedals.
Video Demonstration: LEKATO Guitar Looper Pedal Set
Video: This video demonstrates the LEKATO Guitar Looper Pedal Set, which can be powered by this 9V AC/DC adapter. It showcases the pedal's functionality and how it integrates into a guitar setup.
Mantenimiento
- Limpieza: Desconecte el adaptador de la toma de corriente y del dispositivo antes de limpiarlo. Utilice un paño suave y seco para limpiar la superficie. No utilice limpiadores líquidos ni aerosoles.
- Almacenamiento: Store the adapter in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
- Cuidado de cables: No doble ni doble excesivamente el cable de alimentación. Evite colocar objetos pesados sobre él.
- Inspección: Inspeccione periódicamente el adaptador y el cable para detectar cualquier signo de daño, como cables deshilachados o cables agrietados.asing. If damage is found, discontinue use and replace the adapter.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El dispositivo no se enciende. |
|
|
| Ruido o zumbido excesivo. |
|
|
| El adaptador se siente caliente. |
|
|
Presupuesto
- Marca: LEKATO
- Nombre del modelo: M01696Reino Unido
- Aporte: 100-240V AC, 50/60Hz, 400mA
- Producción: 9 V CC, 1000 mA (1 A)
- Polaridad: Centro negativo
- Tipo de conector: DC Barrel Connector (5.5mm x 2.1mm)
- Longitud del cable: Aproximadamente 5.0 pies
- Características especiales: Short Circuit Protection, Over-charge Protection, Temperature Protection, Over-voltage Protection, Over-current Protection, Overload Protection
- Dispositivos compatibles: Effect Pedals, 9-Volt Battery Devices
- Material: Plástico o metal
- Peso del artículo: 2.89 onzas
- Dimensiones del paquete: 4.02 x 3.07 x 2.6 pulgadas
- Código postal: 793811852394
- ASIN: B07VXGHRSS
Información de garantía
This product is covered by a standard return policy. For specific warranty details and duration, please refer to the purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.
- Return Policy Duration: 30 días (reembolso/reemplazo)
Atención al cliente
For any questions, technical assistance, or support regarding your LEKATO Pedal Power Supply Adapter, please contact the seller or LEKATO customer service. You can often find contact information on the product packaging or the seller's storefront.
Vendedor: WSZCH
Visit the LEKATO Store: LEKATO Store on Amazon
