Cabeza de leprosoamp Modelo 320015-2: Manual de instrucciones del usuario

1. Introducción

This manual provides essential information for the safe and effective use of your Lepro HeadLamp Model 320015-2. Please read these instructions thoroughly before operation and retain for future reference.

¿Qué hay en la caja?

• 2 x Lepro HeadLamps

2. Características principales

• LED superbrillante: Equipped with a powerful XPG2 LED, providing up to 1300 lux illumination and a beam distance of up to 400 feet (120 meters).
• Múltiples modos de iluminación: Features 6 distinct lighting modes including spot light (high/low), flood light (high/low), and red light (stay on/flash) for various needs.
• Diadema ajustable: Removable, washable, and elastic headband ensures a comfortable fit for adults and children, and can be worn over hard hats or helmets.
• 45° Tilt Function: Ergonomic design allows for a 45-degree adjustable angle, reducing neck strain and ensuring light is directed where needed.
• Durable y resistente a la intemperie: IPX4 water-resistant rating protects against splashing water from any angle. Impact-resistant construction withstands drops, rain, cold, and heat.
• Diseño liviano: Weighs only 1.94 ounces (without batteries), making it ideal for extended wear during activities like running and hiking.

Imagen: Más alláview of Lepro HeadLamps highlighting Cree XP-G2 LEDs, IPX4 resistance, protective coating, 6 lighting modes, and adjustable head.

3. Configuración

3.1 Instalación de la batería

The Lepro HeadLamp requires 3 AAA batteries (not included). Follow these steps to install the batteries:

1. Localice el compartimento de la batería en la parte posterior del cabezal.amp unidad.
2. Abra con cuidado la tapa del compartimento de la batería.
3. Inserte 3 pilas AAA, asegurándose de la polaridad correcta (+/-) como se indica dentro del compartimento.
4. Cierre la tapa del compartimiento de la batería de forma segura hasta que encaje en su lugar.

3.2 Ajuste de la diadema

The elastic headband is adjustable to fit various head sizes, from children to adults, and can accommodate hard hats or helmets.

1. Coloque el cabezalamp en tu cabeza.
2. Use the adjustable buckles on the sides of the headband to tighten or loosen it until a comfortable and secure fit is achieved.

Image: Illustrates the versatility of the adjustable headband, fitting various users including adults, children, and over a hard hat.

4. Instrucciones de funcionamiento

Your Lepro HeadLamp features two buttons on the top for controlling the lighting modes.

Imagen: Primer plano view de la cabezaamp's top, indicating the 'General Switch' for ON/OFF and output selection, and the 'Functional Switch' for red/green/strobe modes.

4.1 Power On/Off and White Light Modes

Utilice el Interruptor general (typically the larger button) to control the white light modes:

1. Presione una vez para Spot Light - Low.
2. Presione nuevamente para Spot Light - High.
3. Presione una tercera vez para Flood Light - Low.
4. Presione una cuarta vez para Flood Light - High.
5. Press a fifth time to turn the headlamp APAGADO.

4.2 Modos de luz roja

Utilice el Functional Switch (typically the smaller button) to access the red light modes:

1. Presione una vez para Red Light - Stay On.
2. Presione nuevamente para Red Light - Flash (emergency signal).
3. Press a third time to turn the red light OFF.

Image: Visual representation of the six available lighting modes: Spot Light (Low/High), Flood Light (Low/High), and Red Light (Stay On/Flash).

4.3 Función de inclinación

La cabezaamp unit can be tilted up to 45 degrees to adjust the beam direction without needing to reposition your head. Simply grasp the headlamp unit and gently pivot it to the desired angle.

Imagen: Detallada view de la cabezaamp's adjustable headband, 45-degree tilt mechanism, and shockproof rubber coating.

5. Mantenimiento

5.1 Limpieza

Para limpiar el cabezalamplímpielo con un paño suave.amp Paño. No utilice limpiadores abrasivos ni disolventes. La diadema es extraíble y lavable.

5.2 Almacenamiento

When not in use for extended periods, remove the batteries to prevent leakage and store the headlamp En un lugar fresco y seco.

5.3 Resistencia al agua

La cabezaamp is IPX4 water-resistant, meaning it is protected against splashing water from any direction. It is not designed for submersion in water.

Image: A person cycling in the rain demonstrates the IPX4 water resistance of the Lepro HeadLamp, suitable for various weather conditions.

6. Solución de problemas

6.1 La luz no se enciende

• Asegúrese de que las baterías estén insertadas correctamente con la polaridad adecuada.
• Reemplace las pilas viejas por otras nuevas.
• Verifique si hay daños visibles en el compartimiento de la batería o en los contactos.

6.2 Salida de luz tenue

• Las pilas pueden estar bajas. Reemplácelas por pilas nuevas.
• Asegúrese de que la lente esté limpia y libre de suciedad u obstrucciones.

7. Especificaciones

8. Garantía y soporte

8.1 Información de garantía

This product comes with a manufacturer and seller combination warranty. For specific details regarding warranty coverage and duration, please refer to the documentation included with your purchase or contact Lepro customer service.

8.2 Atención al cliente

For any questions, technical assistance, or support needs, please visit the official Lepro websitio o contacte con su departamento de atención al cliente. La información de contacto suele encontrarse en el empaque del producto o en la página oficial de la marca. websitio.