1. Introducción
Thank you for choosing SOLPEX Solar Deck Lights. These lights are designed to provide warm white illumination for various outdoor areas such as decks, stairs, fences, yards, patios, and pathways. Utilizing solar power, they offer an energy-efficient and automatic lighting solution for enhanced safety and ambiance.
Image: SOLPEX Solar Deck Lights installed on a railing, providing warm illumination.
2. Información de seguridad
- Ensure the solar panel is clean and free from debris to maximize charging efficiency.
- Do not submerge the lights in water. While waterproof, they are designed for outdoor exposure, not submersion.
- Mantener fuera del alcance de los niños pequeños.
- Handle with care during installation to avoid damage to the product or injury.
- Deshazte de las baterías de acuerdo a las regulaciones locales.
3. Contenido del paquete
Each pack of SOLPEX Solar Deck Lights includes the following components:
- 16 x SOLPEX Solar Deck Lights (Warm White)
- Tornillos de montaje
- Anclas de pared
Image: A single SOLPEX Solar Deck Light with its dimensions and the included mounting hardware.
4. Configuración e instalación
Siga estos pasos para un rendimiento óptimo y una instalación segura:
- Desempaquetar y preparar: Carefully remove all lights and accessories from the packaging.
- Activa la Luz: Locate the insulator tab on the back or bottom of each light. Gently pull out this tab to activate the internal battery and enable the light for use. The light has no manual switch; activation is done by removing this tab.
- Elegir la ubicación: Seleccione una ubicación que reciba full and direct sunlight for at least 4-5 hours daily. This is crucial for the solar panel to fully charge the battery. Avoid shaded areas or locations under eaves, trees, or other obstructions that might block sunlight.
- Montaje: The lights can be installed using the provided screws and anchors. Mark the desired mounting points, drill pilot holes if necessary, and secure the lights firmly. Ensure the solar panel faces upwards to receive maximum sunlight.
Image: Illustration showing the importance of installing the solar lights in direct sunlight for optimal charging.
Imagen: Examples of various installation locations for the solar deck lights, including different types of stairs and railings.
5. Instrucciones de funcionamiento
The SOLPEX Solar Deck Lights are designed for automatic operation:
- Encendido/apagado automático: Once activated and charged, the lights will automatically turn on at dusk and turn off at dawn.
- Cargando: On sunny days, the lights require approximately 4-5 hours of direct sunlight to be fully charged.
- Tiempo de ejecución: A full charge allows the lights to operate for an extended period throughout the night. Insufficient charging due to cloudy weather or obstructions will reduce the operating time.
Image: Visual representation of the automatic charging during the day and automatic illumination at night.
6. Mantenimiento
To ensure the longevity and optimal performance of your solar deck lights, consider the following maintenance tips:
- Panel solar limpio: Limpie periódicamente el panel solar con un paño suave y seco.amp Paño para eliminar el polvo, la suciedad o los residuos. Un panel limpio garantiza una absorción eficiente de la luz solar.
- Obstrucciones claras: Regularly check that no new obstructions (e.g., growing plants, fallen leaves) are shading the solar panel.
- Ajuste estacional: In winter months or periods of reduced sunlight, the lights may not charge fully, leading to shorter illumination times. Consider repositioning if possible to maximize sun exposure.
7. Solución de problemas
If your SOLPEX Solar Deck Lights are not functioning as expected, try the following solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende por la noche. | Insulator tab not removed. | Ensure the insulator tab has been completely pulled out. |
| La luz no se enciende por la noche. | Carga insuficiente. | Relocate the light to an area with more direct sunlight. Allow 1-2 sunny days for a full charge. |
| La luz es tenue o sólo permanece encendida por un corto tiempo. | El panel solar está sucio u obstruido. | Clean the solar panel surface. Remove any obstructions (leaves, snow, etc.). |
| La luz es tenue o sólo permanece encendida por un corto tiempo. | Weather conditions (cloudy/rainy). | Performance may be reduced during prolonged cloudy or rainy periods. Normal operation should resume with sufficient sunlight. |
| La luz parpadea o es inconsistente. | Problema de conexión interna. | Gently tap the product. This may help re-establish internal connections. If the problem persists, contact customer support. |
8. Especificaciones
- Marca: SOLPEX
- Modelo: NO
- Color: Blanco cálido
- Material: Acrilonitrilo butadieno estireno (ABS)
- Tipo de fuente de luz: CONDUJO
- Fuente de energía: Alimentado por energía solar
- Dimensiones del producto: 3.46" de largo x 1.77" de ancho x 1.85" de alto
- Peso del artículo: 1.65 libras (por el paquete)
- Volumentage: 2 voltios
- Brillo: 2 lúmenes
- Nivel de resistencia al agua: Impermeable (IP44)
- Tipo de instalación: Montaje empotrado
- Tipo de interruptor: No Switch (Automatic)
- Baterías: 1 AAA batteries required (included/pre-installed)
Image: Key specifications including waterproof rating and dimensions.
9. Garantía y soporte
SOLPEX is committed to providing quality products and customer satisfaction. If you encounter any issues with your solar deck lights, please do not hesitate to contact us. Our customer support team is ready to assist you as soon as possible to resolve any problems.
For support, please refer to the contact information provided with your purchase or visit the official SOLPEX brand store online.
Conserve el recibo de compra para reclamaciones de garantía.
