Introducción
El weBoost Drive X is a powerful vehicle cell phone signal booster designed to enhance cellular connectivity for all major U.S., Canada, and Mexico carriers, including Verizon, T-Mobile, AT&T, Dish, and US Cellular. This device ensures fewer dropped calls, better voice quality, faster mobile internet, improved audio and video streaming, and greater hotspot capability, even in remote areas.
The Drive X is proudly designed, assembled, and tested in the USA by Wilson Electronics, a leader in cellular signal amptecnología de lificación.
¿Qué hay en la caja?
Imagen: La weBoost Drive X booster unit, along with the included inside antenna, outside antenna, and power supply.
Su weBoost Drive X package includes the following components:
- Drive X booster unit
- Antena interior
- Antena exterior
- Fuente de alimentación
Configuración e instalación
El weBoost Drive X is designed for tool-free installation, making setup quick and hassle-free in any type of car, truck, van, or SUV. For detailed, step-by-step video instructions and an antenna positioning guide, it is highly recommended to use the weBoost App.
Imagen: La weBoost App provides guidance for easy installation and troubleshooting, including step-by-step videos and an antenna positioning guide.
Pasos generales de instalación:
- Monte la antena exterior: Secure the outside antenna on the roof of your vehicle, ensuring it has a clear line of sight to cell towers.
- Route the Coaxial Cable: Carefully route the coaxial cable from the outside antenna into the vehicle's interior to the location where the booster will be placed.
- Mount the Booster: Find a suitable location inside your vehicle for the Drive X booster unit. It can be mounted discreetly, such as within a cabinet or under a seat.
- Connect the Inside Antenna: Connect the inside antenna to the booster unit. Position the inside antenna where you need the boosted signal, typically near the area where mobile devices will be used.
- Conecte la electricidad: Plug the power supply into the booster unit and then into your vehicle's power outlet (e.g., 12V accessory outlet). The green light on the booster indicates it is powered on and functioning.
Operación del weBoost Drive X
Once installed and powered on, the weBoost Drive X operates automatically to enhance your cellular signal. The green indicator light on the booster confirms it is active and boosting signal.
- Señal Amplificación: The booster works by receiving weak signals from cell towers via the outside antenna, amplifying them, and then rebroadcasting the stronger signal inside your vehicle via the inside antenna.
- Funcionalidad multiusuario: The Drive X supports multiple users simultaneously, allowing everyone in the vehicle to benefit from improved signal strength.
- Compatibilidad 5G: The system is fully compatible with 5G networks, ensuring optimal performance with the latest cellular technology.
- Improved Connectivity: Experience fewer dropped calls, clearer voice quality, faster data speeds for browsing and streaming, and more reliable hotspot performance.
- On-the-Go Performance: The Drive X maintains boosted signal even when your vehicle is in motion, providing continuous connectivity during travel.
Imagen: La weBoost Drive X ensures you stay connected and productive, no matter where your journey takes you.
Mantenimiento
El weBoost Drive X requires minimal maintenance to ensure optimal performance. Follow these guidelines:
- Mantenga los componentes limpios: Periodically wipe down the booster unit and antennas with a soft, dry cloth to remove dust and debris.
- Inspeccionar cables: Revise periódicamente todas las conexiones de cables para asegurarse de que estén seguras y libres de daños.
- Colocación de la antena: Ensure the outside antenna remains securely mounted and unobstructed for best signal reception.
- Evite condiciones extremas: While designed for vehicle use, avoid exposing the unit to extreme temperatures or direct moisture beyond normal operating conditions.
Solución de problemas
Si tiene problemas con su weBoost Drive X, consider the following common troubleshooting steps:
- No Green Light:
- Check if the power supply is securely plugged into both the booster and the vehicle's power outlet.
- Verify that the vehicle's power outlet is functioning.
- Poor Signal Improvement:
- Ensure adequate separation between the outside and inside antennas. They should be as far apart as possible to prevent oscillation.
- Check the orientation of the outside antenna to ensure it is optimally positioned for receiving signals from the nearest cell tower. The weBoost App can assist with this.
- Confirm all cable connections are tight and correct.
- Move closer to the inside antenna for better signal reception.
- Señal intermitente:
- This can occur if the booster is too close to the inside antenna, causing feedback. Increase separation.
- Ensure the outside antenna is not obstructed by vehicle parts or cargo.
Para obtener más ayuda, consulte la weBoost App or contact weBoost customer support.
Presupuesto
| Característica | Detalle |
|---|---|
| Dimensiones del producto | 6.25 x 4.5 x 1 pulgadas |
| Peso del artículo | 12.3 onzas |
| Número de modelo | Car/Passenger (475021) |
| ASIN | B081BMLXG3 |
| Marca | weBOost |
| Fabricante | Wilson Electronics |
| Color | Negro, rojo, blanco |
| Estándar de comunicación inalámbrica | 802.11a/b/g/n/ac |
| Aprobación de la FCC | FCC ID PWO460021 |
Garantía y soporte
El weBoost Drive X is manufactured by Wilson Electronics. For warranty information and customer support, please refer to the documentation included with your product or visit the official weBOost websitio.
Protection plans may be available for purchase separately, offering extended coverage beyond the manufacturer's warranty. For details on available protection plans, please check with your retailer or the weBoost official channels.
weBoost products are backed by a 30-day money-back guarantee and a 1-year manufacturer's warranty from authorized retailers.