1. Introducción
This user manual provides comprehensive instructions for the Teleco TXP-868-A02 2-channel rolling code remote control. This device is designed for controlling compatible automated systems, such as garage doors, gates, or other access control systems, operating on the 868 MHz frequency.
Las características principales incluyen:
- 2 independent channels for controlling different functions.
- Tecnología de código rodante para una mayor seguridad.
- Operates on the 868 MHz frequency.
- Powered by a single CR2032 battery (included).
Figura 1: Frente view of the Teleco TXP-868-A02 remote control, showing the two distinct buttons for channel operation.
2. Producto terminadoview y componentes
The Teleco TXP-868-A02 remote control features a compact design with two primary buttons for operation. The device is designed for easy handling and portability.
Figura 2: Frente detallado view highlighting the two operational buttons.
Figura 3: Atrás view of the remote control, showing the battery compartment cover and product identification label.
Figure 4: The remote control with its back cover removed, illustrating the internal structure and battery housing area.
3. Especificaciones
| Característica | Detalle |
|---|---|
| Modelo | TXP-868-A02 |
| Marca | Telecomunicaciones |
| Canales | 2 |
| Frecuencia | 868 MHz |
| Tipo de batería | 1 x CR2032 (incluido) |
| Peso | 30 gramos |
| Tecnología | Código rodante |
4. Configuración
4.1. Instalación de la batería
The Teleco TXP-868-A02 remote control comes with a CR2032 battery pre-installed. If replacement is needed, follow these steps:
- Abra con cuidado el control remoto casing. Refer to Figure 3 for the battery compartment location on the back.
- Retire la batería CR2032 vieja.
- Insert a new CR2032 battery, ensuring the positive (+) side is facing upwards.
- Cerrar el control remoto casing de forma segura.
4.2. Programación del control remoto
The Teleco TXP-868-A02 uses rolling code technology, which requires pairing with a compatible receiver unit. Specific programming procedures vary depending on the receiver model you are using. Always refer to the instruction manual provided with your receiver unit for detailed programming steps.
Pasos generales de programación (pueden variar):
- Locate the programming button or learn mode on your receiver unit (e.g., garage door opener, gate opener).
- Activate the receiver's programming mode (often indicated by an LED light).
- Within a few seconds, press and hold the desired button on your Teleco TXP-868-A02 remote control for 2-3 seconds.
- Release the button. The receiver's LED may flash or change state to indicate successful pairing.
- Test the remote control to ensure it operates the system correctly.
Si encuentra dificultades, consulte el manual del receptor o póngase en contacto con un técnico cualificado.
5. Instrucciones de funcionamiento
Once the Teleco TXP-868-A02 remote control is successfully programmed with your receiver, operation is straightforward:
- To activate Channel 1: Press the izquierda Botón en el control remoto.
- To activate Channel 2: Press the bien Botón en el control remoto.
Ensure you are within the operational range of your receiver unit for the remote control to function correctly. Obstructions and interference can affect the range.
6. Mantenimiento
6.1. Reemplazo de la batería
When the remote control's range decreases significantly or it stops responding, the battery may need replacement. Follow the steps outlined in Section 4.1. "Battery Installation". Dispose of old batteries responsibly according to local regulations.
6.2. Limpieza
Clean the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water. Keep the buttons free from dirt and debris to ensure proper function.
6.3. Almacenamiento
Store the remote control in a dry place, away from direct sunlight, extreme temperatures, and high humidity. Avoid dropping the device or subjecting it to strong impacts.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El control remoto no funciona. | Batería muerta o baja. No programado correctamente. Fuera de rango. Receiver issue. | Reemplace la batería CR2032. Vuelva a programar el control remoto en el receptor (consulte la Sección 4.2). Acérquese a la unidad receptora. Check the receiver unit's power and status. |
| Rango operativo reducido. | Batería baja. Interferencia de radio. Obstrucciones. | Reemplace la batería CR2032. Identificar y eliminar fuentes de interferencia (por ejemplo, otros dispositivos inalámbricos). Asegúrese de tener una línea de visión clara si es posible. |
| Los botones están pegajosos o no responden. | Suciedad o residuos debajo de los botones. | Limpie el control remoto como se describe en la Sección 6.2. |
8. Compatibilidad
The Teleco TXP-868-A02 remote control is designed to be compatible with specific Teleco rolling code remote controls and receivers operating on the 868 MHz frequency. It is no compatible with 433 MHz systems.
Compatible Teleco rolling code remote control models include:
- TVTXP-868-A01
- TVTXP-868-A02
- TVTXP-868-A04
- TVMIO-868-P02
- TVMIO-868-P04
- TVTXE-868-A04
Figure 5: Visual guide to compatible Teleco 868MHz rolling code remote controls. Note the explicit incompatibility with 433MHz models.
9. Garantía y soporte
For information regarding warranty coverage, returns, or technical support for your Teleco TXP-868-A02 remote control, please contact the retailer or authorized distributor from whom you purchased the product. Keep your proof of purchase for warranty claims.
Manufacturer: Teleco
