Introducción
This manual provides essential information for the safe and effective use of your Luceco LED Inspection Head Torch. Please read these instructions carefully before operating the device and retain them for future reference. This head torch is designed for various applications, including professional inspection, DIY tasks, camping, and other outdoor activities, offering versatile lighting modes and hands-free operation.
Figura 1: Frente view of the Luceco LED Inspection Head Torch.
Producto terminadoview
The Luceco LED Inspection Head Torch is a versatile and durable lighting solution. Key features include:
- 5 modos de iluminación: Includes 100% output, 50% output, flash mode, red light, and red flash mode.
- PIR Sensor de movimiento: For hands-free operation, allowing activation and deactivation with a wave of the hand.
- Inclinación ajustable: The torch head can be tilted up to 60 degrees to direct light precisely where needed.
- Batería recargable: Integrated lithium polymer battery, conveniently charged via USB Type-C.
- Construcción duradera: Lightweight ABS body with an IK04 rating, designed to withstand tough environments.
- Diadema ajustable: Elastic headband ensures a comfortable and secure fit for various head sizes.
Configuración
1. Carga inicial
Before first use, fully charge the head torch. Connect the provided USB Type-C cable to the charging port on the head torch and plug the other end into a compatible USB power source (e.g., computer, USB wall adapter). The charging indicator light will show the charging status. A full charge typically takes approximately 2.5 hours.
Figure 2: USB Type-C charging port for convenient recharging.
2. Ajuste de la diadema
Place the head torch on your head. Adjust the elastic headband by sliding the buckles on either side until it fits snugly and comfortably. Ensure the torch unit is centered on your forehead.
Figure 3: The adjustable headband ensures a comfortable and secure fit.
Instrucciones de funcionamiento
1. Encendido/Apagado y Selección de Modo
Locate the power button on the top of the head torch. Press the button to cycle through the following lighting modes:
- Primera pulsación: 100% Light Output (150lm)
- Segunda pulsación: 50% Light Output
- Tercera Prensa: Modo de flash
- Cuarta Prensa: Luz roja
- Quinta Prensa: Modo parpadeo rojo
- Sexta Prensa: Apagado
To turn off the torch from any mode, press and hold the power button for approximately 2 seconds.
Figure 4: The head torch offers five versatile lighting modes.
2. PIR Motion Sensing Function
The head torch features a PIR motion sensor for hands-free control. To activate this function, press the dedicated motion sensor button (usually located near the power button). Once activated, you can turn the light on or off by waving your hand in front of the sensor.
3. Tilting the Torch Head
The torch head can be manually tilted up or down to adjust the beam angle. Gently push the torch unit to achieve the desired angle, up to 60 degrees. This allows you to focus light on specific areas without repositioning the entire head torch.
Figure 5: The torch head can be tilted for precise light direction.
Mantenimiento
1. Limpieza
To clean the head torch, wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or internal components. Ensure the charging port cover is securely closed before cleaning to prevent water ingress.
2. Cuidado de la batería
The integrated lithium polymer battery is designed for long life. To maximize battery longevity:
- Recharge the battery when the light output becomes noticeably dim.
- Evite descargar completamente la batería con frecuencia.
- If storing the head torch for an extended period, charge it to approximately 50% every 3-6 months.
3. Almacenamiento
Store the head torch in a cool, dry place away from direct sunlight and extreme temperatures. Keep it away from corrosive materials and out of reach of children.
Solución de problemas
If you encounter issues with your Luceco LED Inspection Head Torch, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| La antorcha no se enciende. | La batería está agotada. | Charge the head torch fully using the provided USB cable. |
| La luz es tenue o parpadea. | Nivel de batería bajo. | Recargar la batería. |
| Torch does not charge. | Faulty USB cable or power source; charging port obstruction. | Try a different USB cable or power source. Check the charging port for debris and clean if necessary. |
| El sensor de movimiento no responde. | Sensor not activated; obstruction in front of sensor. | Ensure the motion sensor function is activated (press the dedicated button). Clear any obstructions from the sensor area. |
Si el problema persiste después de intentar estas soluciones, comuníquese con el servicio de atención al cliente de Luceco.
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | LILH15P65-01 |
| Tipo de fuente de luz | CONDUJO |
| Quétage | 3 vatios |
| Flujo luminoso | 150 lúmenes |
| Temperatura de color | 6500K (blanco frío) |
| Distancia del haz | Hasta 150m |
| Tipo de batería | Polímero de litio (incluido) |
| Tiempo de carga | Aproximadamente 2.5 horas |
| Duración de la batería (máxima) | Up to 20 hours (depending on use) |
| Vida útil del LED | 25,000 horas |
| Material | ABS (body), Aluminum (internal components) |
| Color | Negro / Verde |
| Dimensiones del producto | 2.7 x 10.6 x 13.1 cm |
| Peso del artículo | 80 gramos |
| Ingress Protection (IK Rating) | IK04 |
Garantía y soporte
The Luceco LED Inspection Head Torch comes with a Garantía del fabricante de 1 años a partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the dedicated Luceco technical support team. Please have your product model number (LILH15P65-01) and proof of purchase ready when contacting support.
