1. Producto terminadoview
The Kohler K-26533-CP Industrial Towel Bar is designed to provide a durable and reliable solution for your bathroom. Its industrial aesthetic is inspired by machined metal tools, offering a strong and unpretentious character suitable for contemporary spaces. This 18-inch (457 mm) bar is constructed from premium metal and features a Polished Chrome finish, engineered to resist corrosion and tarnishing.
Características principales:
- 18-inch (457 mm) bar length.
- Construcción de metal premium para mayor durabilidad y confiabilidad.
- Los acabados de KOHLER resisten la corrosión y el deslustre.
- Coordinates with contemporary-style KOHLER faucets and showering components.
Image 1.1: The Kohler K-26533-CP Industrial Towel Bar, showcasing its polished chrome finish and industrial design.
2. Configuración e instalación
This section provides general guidelines for installing your Kohler K-26533-CP Industrial Towel Bar. Specific mounting hardware and detailed templates may be included with your product. Always refer to any included manufacturer's instructions for precise measurements and hardware usage.
Herramientas y materiales necesarios:
- Lápiz
- Cinta métrica
- Nivel
- Drill with appropriate drill bits (for wall anchors)
- Destornillador (Phillips o de punta plana, según el hardware)
- Buscador de vigas (recomendado)
Pasos de instalación:
- Determine la ubicación de montaje: Choose a suitable location on your wall, ensuring it is level and at a convenient height. Use a stud finder to locate wall studs for secure mounting, if possible.
- Marcar los puntos de montaje: Hold the towel bar's mounting brackets against the wall at the desired location. Use a level to ensure proper alignment. Mark the screw hole positions with a pencil.
- Perforar agujeros piloto: Drill pilot holes at the marked positions. If mounting into drywall without a stud, use appropriate wall anchors (typically included) and drill holes according to anchor specifications.
- Adjuntar soportes de montaje: Secure the mounting brackets to the wall using the provided screws. Ensure they are firmly attached and level.
- Ensamblar la barra de toalla: Attach the towel bar to the secured mounting brackets. This usually involves sliding the bar onto the brackets and tightening set screws from underneath or the side to hold it in place.
- Comprobación final: Gently pull on the installed towel bar to ensure it is secure and stable.
3. Instrucciones de funcionamiento
The Kohler K-26533-CP Industrial Towel Bar is designed for straightforward use. Simply hang your towels, washcloths, or other bathroom linens over the bar. Ensure items are evenly distributed to maintain balance and prevent excessive strain on the mounting.
4. Mantenimiento y cuidado
Proper care will help maintain the finish and extend the life of your Kohler towel bar.
- Limpieza regular: Limpie la superficie periódicamente con un paño suave.amp paño.
- Jabón suave: For more thorough cleaning, use a mild soap solution and rinse thoroughly with water.
- Evite los limpiadores agresivos: Do not use abrasive cleaners, scouring pads, or chemical-based cleaning agents (e.g., ammonia, bleach, or acid-based cleaners) as these can damage the polished chrome finish.
- El secado: Always dry the towel bar immediately after cleaning to prevent water spots.
5. Solución de problemas
Si tiene algún problema con su toallero, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| La barra de toalla se siente floja o inestable. | Los tornillos de montaje están flojos o los anclajes de pared no están seguros. | Tighten mounting screws. If anchors are loose, consider using larger or different type of wall anchors, or relocating the bar to a wall stud. |
| El acabado parece opaco o manchado. | Hard water spots or residue from harsh cleaners. | Clean with a soft cloth and mild soap. Avoid abrasive cleaners. For hard water spots, use a vinegar-water solution (1:1) and rinse thoroughly. |
| Towel bar detaches from brackets. | Set screws holding the bar to the brackets are loose. | Locate and tighten the set screws, typically found on the underside of the mounting posts. |
6. Especificaciones
| Atributo | Detalle |
|---|---|
| Número de modelo | K-26533-CP |
| Color | Cromo pulido |
| Material | Metal |
| Tipo de acabado | Pulido |
| Tipo de instalación | Montado en la pared |
| Forma | Derecho |
| Peso del artículo | 2.2 libras |
| Dimensiones del producto | 4 x 18 x 3.63 pulgadas |
| Código Postal | 885612823120 |
7. Información de garantía
This Kohler K-26533-CP Industrial Towel Bar is covered by the KOHLER Faucet Lifetime Limited Warranty. Please refer to the official Kohler warranty documentation for full terms and conditions. This warranty typically covers defects in material and manufacturing under normal use and service.
8. Soporte y contacto
For further assistance, technical support, or warranty claims, please contact Kohler customer service or visit their official websitio.
- Kohler Oficial Websitio: www.kohler.com
- Tienda Kohler en Amazon: Visit the Kohler Store
When contacting support, please have your product model number (K-26533-CP) and purchase information readily available.