1. Producto terminadoview
The BTF-LIGHTING FCOB COB LED Strip provides uniform, high-density illumination for various indoor decorative applications. This flexible LED ribbon operates at DC12V, emits Natural White 4000K light, and features a high Color Rendering Index (CRI) of 90+ for accurate color representation. Its design ensures a spotless and soft light output, avoiding visible individual LED dots.
Características principales:
- Ultra Bright and Uniform Light: Features 480 LEDs/meter for a continuous, dot-free light output.
- Alto CRI 90+: Ensures colors appear true and vibrant.
- Flexible y cortable: Can be cut at designated marks and bent for custom installations.
- Regulable: Compatible with various dimmers and controllers for adjustable brightness.
- Fácil instalación: Equipped with self-adhesive backing for simple mounting.
2. Contenido del paquete
Los siguientes elementos están incluidos en su paquete:
- 1x 16.4FT FCOB LED Strip Light (No Power Supply or Controller included)
- 2x Non-Wired Gapless Solderless Connectors
- 3x LED Strip Fixed Clips
- 1x 20AWG Extension Wires
- 1x Manual de usuario
3. Especificaciones técnicas
| Característica | Especificación |
|---|---|
| Marca | BTF-ILUMINACIÓN |
| Número de modelo | FCOB-12V-480L-W-IP30 |
| Color | Blanco natural 4000K |
| Volumentage | 12 voltios (CC) |
| Quétage | 18 Watts (for 16.4FT) |
| LED por metro | 480 LED/m |
| Longitud del artículo | 5 metros (16.4 pies) |
| Ancho | 8 mm |
| CRI | 90+ |
| Uso en interiores y exteriores | Interior |
| Características especiales | DC connector, Dimmable, No Light spot, Uniform light |
| Vida media | 65,000 horas |
4. Información de seguridad
- Asegúrese de que la fuente de alimentación esté desconectada antes de la instalación o el mantenimiento.
- Use only with a compatible DC12V power supply (not included). Using an incorrect voltage can damage the strip.
- No doble bruscamente la tira de LED ni aplique fuerza excesiva, ya que esto puede dañar el circuito interno.
- Avoid installing in areas with high humidity or direct water exposure unless the product's IP rating specifically allows for it (this model is IP30 for indoor use).
- Mantener fuera del alcance de los niños.
- Do not cover the LED strip with materials that could trap heat, as this may lead to overheating.
5. Guía de instalación
Follow these steps for proper installation of your FCOB LED strip:
5.1 Preparación de la superficie
- Clean the installation surface thoroughly to remove dust, dirt, and oils. A clean, dry surface ensures optimal adhesion of the strip's self-adhesive backing.
- Ensure the surface is smooth and non-porous for best results.
5.2 Cutting and Linking
The FCOB LED strip is designed to be cut at specific intervals. Look for the designated cut marks along the strip. You can link multiple strips using the provided non-wired gapless solderless connectors or by soldering.
5.3 métodos de conexión
The LED strip can be connected in several ways:
- Fuente de alimentación directa: Connect the strip directly to a compatible DC12V power adapter using the DC plugs on the strip.
- With a Controller: For dimming and other control features, connect the strip to a compatible LED controller (sold separately), which then connects to a power adapter.
- With a Dimmable LED Driver: For TRIAC dimming, connect the strip to a compatible dimmable LED driver.
5.4 Strip Dimensions
6. Instrucciones de funcionamiento
Once installed and connected to a compatible power source and/or controller, operate your FCOB LED strip as follows:
6.1 Encendido y apagado
If connected directly to a power supply, the strip will illuminate when the power supply is active. If using a controller, use the controller's power button to turn the strip on or off.
6.2 Atenuación
This LED strip is dimmable when used with a compatible dimmer or controller. Adjust the brightness levels using your chosen control device.
Temperatura de color 6.3
This specific model provides Natural White 4000K light. Other models may offer different color temperatures (e.g., Warm White 2700K/3000K, Daylight White 5000K, Cool White 6000K) which can be selected via a compatible controller if applicable.
7. Solución de problemas
If you encounter issues with your LED strip, refer to the following common problems and solutions:
- Sin luz:
- Check if the power supply is properly connected and receiving power.
- Verify that the LED strip is correctly connected to the power supply or controller.
- Asegúrese de que la fuente de alimentación voltage matches the strip's requirement (DC12V).
- If using a controller, check its battery and ensure it's functioning correctly.
- Flickering or Inconsistent Light:
- Check all connections for looseness or poor contact.
- Ensure the power supply has sufficient wattage for the length of the LED strip.
- Inspect the strip for any physical damage or sharp bends.
- La atenuación no funciona:
- Confirm that your controller or dimmer is compatible with single-color LED strips and is functioning correctly.
- Ensure the controller is properly connected between the power supply and the LED strip.
8. Cuidado y mantenimiento
- Limpieza: Gently wipe the LED strip with a soft, dry cloth. Avoid using abrasive cleaners or excessive moisture.
- Manejo: When handling, avoid pulling the strip by its wires or applying sharp bends.
- Almacenamiento: If storing the strip, roll it loosely on its original reel to prevent damage.
9. Garantía y atención al cliente
BTF-LIGHTING FCOB LED strips are designed for a long lifespan of over 65,000 hours. For any troubleshooting, replacement, or questions regarding purchase or installation, please contact BTF-LIGHTING customer service. We are committed to providing support and assistance.
