Cable HDMI Amazon Basics de 1,8 m (6 pies), HDMI 2.1 (48 Gbps), manual de usuario

Introducción

This manual provides instructions for the Amazon Basics 6-foot HDMI 2.1 cable. This cable is designed to transmit high-quality digital audio and video signals between compatible devices. It supports advanced features such as 8K resolution at 60Hz, 4K resolution at 120Hz, 48Gbps bandwidth, and Audio Return Channel (ARC).

Características del producto

• Ultra alta velocidad: Certified HDMI 2.1 cable with 48Gbps bandwidth.
• Soporte de alta resolución: Capable of transmitting 8K video at 60Hz and 4K video at 120Hz.
• Canal de retorno de audio (ARC): Supports ARC for simplified audio setups.
• Compatibilidad con Ethernet: Allows for internet connection sharing among multiple devices without a separate Ethernet cable.
• Construcción duradera: Features a flexible PVC cable and gold-plated HDMI connectors for corrosion resistance and enhanced signal transmission.
• Conectar y usar: Designed for easy connection without the need for complex drivers or setup.

Image: The Amazon Basics HDMI cable coiled, illustrating its 8K@60Hz, 48Gbps capabilities and Ethernet support.

Instrucciones de instalación

1. Identificar puertos: Locate the HDMI output port on your source device (e.g., gaming console, laptop, streaming device) and the HDMI input port on your display device (e.g., TV, monitor, projector). Ensure both ports are clean and free of obstructions.
2. Cable de conexión: Gently insert one end of the Amazon Basics HDMI cable into the HDMI output port of your source device.
3. Conectar a la pantalla: Inserte el otro extremo del cable HDMI en un puerto de entrada HDMI disponible en su dispositivo de visualización. Asegúrese de que la conexión sea segura en ambos extremos.
4. Dispositivos de encendido: Encienda tanto el dispositivo fuente como el dispositivo de visualización.
5. Seleccionar entrada: On your display device, use the remote control or on-screen menu to select the correct HDMI input source that corresponds to the port where the cable is connected.

Image: An Amazon Basics HDMI cable connecting a laptop to a television, demonstrating a typical setup.

Image: An Amazon Basics HDMI cable connecting a laptop to a computer monitor, illustrating another common connection scenario.

Instrucciones de funcionamiento

Once the cable is securely connected and devices are powered on, the HDMI cable will automatically transmit audio and video signals. No additional software or drivers are typically required for operation.

• Detección de señal: Most modern display devices will automatically detect the incoming HDMI signal. If not, manually select the correct HDMI input on your display.
• Resolución y frecuencia de actualización: The cable supports resolutions up to 8K@60Hz and 4K@120Hz. Ensure your source device and display device are also capable of these resolutions and refresh rates to experience the full benefits. Adjust display settings on your source device if necessary.
• Canal de retorno de audio (ARC): If your TV and audio receiver/soundbar support ARC, connect the HDMI cable to the designated ARC-enabled HDMI port on both devices. This allows audio from your TV to be sent back to the audio system via the same HDMI cable.

Mantenimiento

• Almacenamiento: When not in use, store the cable in a cool, dry place. Avoid tightly coiling or sharply bending the cable, as this can damage internal wires.
• Manejo: Always grasp the connector ends when plugging or unplugging the cable. Avoid pulling on the cable itself, which can strain the connections.
• Limpieza: If the connectors become dusty, gently wipe them with a clean, dry, lint-free cloth. Do not use liquid cleaners directly on the connectors.
• Inspección: Periodically inspect the cable and connectors for any signs of damage, such as frayed insulation or bent pins. Discontinue use if damage is observed.

Solución de problemas

Si encuentra problemas, pruebe los siguientes pasos:

1. Sin imagen/sonido:
   • Asegúrese de que el cable HDMI esté conectado de forma segura tanto al dispositivo de origen como al de visualización.
   • Verifique que la fuente de entrada HDMI correcta esté seleccionada en su dispositivo de visualización.
   • Intente conectar el cable a un puerto HDMI diferente en su dispositivo de visualización.
   • Reinicie tanto el dispositivo de origen como el dispositivo de visualización.
2. Señal parpadeante o intermitente:
   • Compruebe si hay conexiones sueltas.
   • Asegúrese de que el cable no esté doblado ni enroscado excesivamente.
   • Reduzca la resolución o la frecuencia de actualización en su dispositivo de origen para ver si el problema persiste.
3. Problemas de audio (sin sonido o sonido distorsionado):
   • Confirm that the volume on both your source and display devices is turned up and not muted.
   • If using ARC, ensure it is enabled in the settings of both your TV and audio system, and that the cable is connected to the correct ARC-enabled ports.
   • Verifique la configuración de salida de audio en su dispositivo fuente.

Presupuesto

Garantía y soporte

For information regarding product warranty or technical support, please refer to the Amazon Basics official website or contact Amazon customer service directly. Details on return policies are typically available on the product's purchase page.