1. Introducción
Image: The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander, accompanied by its Systainer storage case, detachable power cord, a sanding pad, and an edge protector, laid out on a white surface.
The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander is designed for both rapid material removal and fine finishing. It offers dual-mode sanding, allowing users to switch between aggressive rotary random orbital motion for coarse sanding and polishing, and random orbital motion for fine sanding. This compact 5-inch sander is ideal for various tasks, providing powerful performance in a lightweight and maneuverable package. Its integrated Jet Stream dust extraction system ensures a cleaner workspace and extends abrasive life. The removable edge protector allows for precise sanding near adjacent surfaces without causing damage.
2. Configuración
2.1 Desembalaje e inspección
Carefully remove all components from the Systainer3. Inspect the sander and accessories for any signs of damage during transit. Ensure all included components are present:
- Lijadora
- StickFix Sanding Pad
- Protector de borde
- 1 Abrasive Sheet
- Plug-It Cord
- Systainer3 (storage case)
2.2 Conexión del cable de alimentación
The Festool Rotex RO 125 FEQ-Plus utilizes a detachable Plug-It Cord. Align the Plug-It Cord connector with the port on the sander and push firmly until it clicks into place. Ensure a secure connection before plugging the cord into a power outlet.
2.3 Attaching the Sanding Pad and Abrasive
- Asegúrese de que la lijadora esté desenchufada.
- Align the StickFix Sanding Pad with the base of the sander and press firmly to secure it. The FastFix system allows for tool-free pad changes.
- Attach the abrasive sheet to the StickFix Sanding Pad. The hook-and-loop design ensures easy and secure attachment.
2.4 Attaching the Edge Protector
For sanding close to edges or adjacent surfaces, attach the removable edge protector to prevent damage to both the workpiece and the sander.
3. Instrucciones de funcionamiento
3.1 Dual-Mode Sanding
The Rotex RO 125 FEQ-Plus features two primary sanding modes:
- Rotary Random Orbital Motion (Aggressive Mode): This gear-driven mode provides rapid stock removal and is suitable for coarse sanding or polishing applications.
- Random Orbital Sanding Motion (Fine Mode): This mode is ideal for fine sanding, providing a smooth, swirl-free finish.
Switch between modes using the selector switch located on the top of the sander. Ensure the sander is off before changing modes.
3.2 Control de velocidad
The sander features variable speed control, allowing you to adjust the oscillation rate to match the material and desired finish. Use the speed dial to select the appropriate speed for your task. Lower speeds are generally used for fine finishing or delicate materials, while higher speeds are for aggressive material removal.
3.3 Encendido / Apagado
To turn the sander on, press the power switch. To turn it off, press the switch again. Always ensure a firm grip on the sander before powering it on.
4. Mantenimiento
4.1 Extracción de polvo
The Jetstream dust extraction design is highly efficient. For optimal performance and a clean workspace, connect the sander to a compatible dust extractor. Regularly empty the dust bag or container of your dust extractor.
4.2 Changing Sanding Pads
The FastFix tool-free backing pad changing system makes replacing pads simple. To change a pad, ensure the sander is unplugged. Firmly pull the old pad off and press the new pad onto the base until it is securely attached.
4.3 Limpieza general
After each use, wipe down the sander with a clean, dry cloth. Ensure no dust or debris accumulates in the ventilation slots or around the sanding pad. Do not use harsh chemicals or abrasive cleaners.
5. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sander does not power on. | No hay fuente de alimentación; cable de alimentación suelto. | Check power outlet; ensure Plug-It Cord is securely connected. |
| Poor sanding results (e.g., swirl marks). | Worn abrasive; incorrect mode/speed; excessive pressure. | Replace abrasive; select appropriate mode/speed; apply even, light pressure. |
| Polvo excesivo. | Dust extractor not connected/clogged; worn sanding pad. | Connect/clear dust extractor; replace sanding pad if holes are blocked. |
6. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | Festool |
| Dimensiones del producto | 15.59" de largo x 11.65" de ancho x 7.36" de alto |
| Tipo de grano | Grueso |
| Fuente de poder | Eléctrico con cable |
| Corriente del adaptador de CA | 4.2 Amps |
| Número de grano | 60 |
| Diámetro del disco | 5 pulgadas |
| Fabricante | Festool |
| Número de pieza | 576032 |
| Peso del artículo | 8.26 libras |
| País natal | Alemania |
| Número de modelo del artículo | 576032 |
| Cantidad de artículos del paquete | 1 |
| ¿Se requieren pilas? | No |
| Fecha de primera disponibilidad | 2 de septiembre de 2020 |
7. Componentes incluidos
The Festool Rotex RO 125 FEQ-Plus Random Orbital Sander package includes:
- Lijadora
- StickFix Sanding Pad
- Protector de borde
- 1 Abrasive Sheet
- Plug-It Cord
- New generation Systainer3 (fully compatible with current T-LOC Systainers and can be latched on top of Classic Systainer from 1993)
8. Garantía y soporte
8.1 Información de garantía
Este producto está cubierto por un Garantía del fabricante de 3 añosConserve su comprobante de compra para reclamaciones de garantía.
8.2 Atención al cliente
For technical assistance, spare parts, or service inquiries, please refer to the official Festool website or contact their customer service department. Detailed contact information can typically be found on the product packaging or the manufacturer's official websitio.
