1. Introducción
This manual provides essential information for the safe and efficient operation of your Ultimate Speed Portable Compressor. Please read this manual thoroughly before first use and keep it for future reference. This powerful cordless mini compressor is designed for inflating tires on vehicles and bicycles, as well as various camping and sports equipment.
Figure 1: The Ultimate Speed Portable Compressor shown with its included accessories, including the 12V charging cable, mains charging cable, and various inflation adapters.
2. Instrucciones de seguridad
Observe siempre las siguientes precauciones de seguridad para evitar lesiones o daños al dispositivo:
- Seguridad general: Keep the device out of reach of children. Do not operate the compressor in wet conditions or near flammable liquids/gases.
- Seguridad eléctrica: Use only the provided charging cables. Do not attempt to open or modify the device. Disconnect from power when not in use or during cleaning.
- Seguridad de presión: Do not exceed the maximum recommended pressure for the item being inflated. Over-inflation can cause bursting and serious injury. Always check the manufacturer's recommended pressure.
- Seguridad de la batería: The device contains a Lithium-Iron-Phosphate battery. Do not expose to extreme temperatures, direct sunlight, or fire. Do not short-circuit the battery terminals.
- Operación: Do not leave the compressor unattended during operation. Allow the device to cool down after prolonged use to prevent overheating.
3. Contenido del paquete
Carefully unpack all items and check for completeness. If any parts are missing or damaged, contact customer support immediately.
- Ultimate Speed Portable Compressor
- Integrated Air Hose with Car Valve Adapter (permanently installed)
- Adaptador de válvula de bicicleta
- Aguja de bola
- adaptador universal
- 12V Charging Cable (2 meters)
- Mains Charging Cable (0.5 meters)
- Bolsa de transporte
- Manual de instrucciones (este documento)
4. Características del producto
The Ultimate Speed Portable Compressor offers a range of features for convenient and efficient inflation:
- Powerful Cordless Operation: Equipped with a modern Lithium-Iron-Phosphate battery (12.8 V / 500 mAh) for portable use.
- Pre-settable Air Pressure: Set your desired pressure up to 4.1 bar (60 PSI) with automatic shut-off once the target pressure is reached.
- Adaptadores versátiles: Includes a permanently installed car valve adapter, a bicycle valve adapter, a ball needle, and a universal adapter for various inflation needs.
- Linterna LED integrada: Proporciona iluminación para su uso en condiciones de poca luz.
- Illuminated LC Display: Features a clear display showing manometer readings, battery charge status, and charging progress.
- Almacenamiento compacto: The air hose and adapters can be conveniently stored within the device itself.
5. Configuración
Before first use, ensure the compressor is fully charged.
- Carga de la batería:
- Connect the provided mains charging cable to the compressor's charging port and then to a standard wall outlet.
- Alternatively, use the 12V charging cable to charge the compressor from a vehicle's 12V socket.
- The LC display will indicate the charging progress. Charge until the battery indicator shows full.
- Conexión de adaptadores:
- The car valve adapter is permanently installed on the air hose.
- For bicycle valves, balls, or other inflatables, select the appropriate adapter from the storage compartment and screw it onto the car valve adapter.
6. Instrucciones de funcionamiento
Follow these steps to inflate items using your compressor:
- Encendido: Press the power button to turn on the compressor. The LC display will illuminate.
- Establezca la presión deseada: Use the '+' and '-' buttons to set the target air pressure (in BAR or PSI, depending on the unit setting). The display will show the current pressure and the set target pressure.
- Conectar al artículo: Securely attach the appropriate adapter to the item you wish to inflate (e.g., tire valve, ball valve). Ensure a tight seal to prevent air leakage.
- Iniciar inflación: Press the start button to begin inflation. The compressor will automatically stop once the pre-set pressure is reached.
- Monitorear el progreso: The LC display will show the current pressure during inflation.
- Usando la luz LED: Press the light button to turn the integrated LED flashlight on or off.
- Apagado: Press the power button again to turn off the compressor after use.
7. Mantenimiento
Proper maintenance ensures the longevity and performance of your compressor:
- Limpieza: Limpie el exterior del compresor con un paño suave y húmedo.amp paño. No utilice limpiadores abrasivos ni sumerja el dispositivo en agua.
- Almacenamiento: Store the compressor and its accessories in the provided transport bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the air hose and adapters are neatly stored in their designated compartments.
- Cuidado de la batería: For optimal battery life, charge the compressor regularly, even if not in frequent use. Avoid completely draining the battery before recharging.
8. Solución de problemas
Si tiene problemas con su compresor, consulte la siguiente tabla:
| Problema | Posible causa | Solución |
|---|---|---|
| El compresor no se enciende. | La batería está agotada. | Charge the battery using the provided charging cables. |
| El compresor funciona pero no se infla. | Air hose or adapter not securely connected; Leakage. | Ensure all connections are tight. Check for damage to the hose or adapters. |
| El compresor se detiene prematuramente. | Pre-set pressure reached; Overheating. | This is normal if target pressure is met. If not, allow the device to cool down before resuming operation. |
| Lectura de presión inexacta. | Sensor issue; Adapter not fully sealed. | Ensure adapter is tightly connected. If problem persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Ultimate Speed customer support.
9. Especificaciones
| Número de modelo | 4056232734400 |
| Marca | Máxima velocidad |
| Fuente de poder | Funciona con pilas |
| Tipo de batería | Lithium-Iron-Phosphate (LiFePO4) |
| Volumen de la bateríatage / Capacidad | 12.8 V / 500 mAh |
| Presión de aire máxima | 4.1 bares (60 PSI) |
| Tipo de material | Aluminio |
| Color | Rojo |
| Peso del artículo | 600 gramos |
| Aplicaciones recomendadas | Cars, bicycles, sports balls, and general inflation purposes. |
| Componentes incluidos | Compressor, 12V charging cable (2m), Mains charging cable (0.5m), Transport bag, Instruction manual, 4 adapters. |
10. Garantía y soporte
For information regarding warranty coverage, returns, or technical support, please refer to the warranty card included with your product or visit the official Ultimate Speed webSitio. Conserve su recibo de compra como comprobante de compra.
For further assistance, please contact Ultimate Speed customer service.
