Parkside PBS 350 A1 350W Band Saw Instruction Manual
Modelo: PBS 350 A1 | Marca: Lidl
1. Introducción
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Parkside PBS 350 A1 350W Band Saw. Please read these instructions thoroughly before using the tool to ensure proper function and to prevent injury or damage.
The Parkside PBS 350 A1 is designed for cutting hard and soft wood, laminate, and fiberboard. It features a powerful 350W motor with constant cutting speed, a parallel guide for precise longitudinal cuts, and an adjustable table for miter cuts.
2. Instrucciones de seguridad
Always prioritize safety when operating power tools. Failure to follow these safety guidelines may result in serious injury or property damage.
- Utilice equipo de protección personal (EPP) adecuado: Always wear safety glasses, hearing protection, and a dust mask. Gloves are recommended for handling rough materials but should be avoided near moving parts.
- Garantizar un ambiente de trabajo seguro: Keep the work area clean, well-lit, and free from obstructions. Do not operate the saw in damp o condiciones húmedas.
- Asegure la pieza de trabajo: Siempre use clamps or the parallel guide to secure the material being cut. Never hold the workpiece freehand.
- Maintain proper posture: Keep a balanced stance and avoid overreaching.
- Utilice la cuchilla correcta: Ensure the blade is sharp, properly tensioned, and suitable for the material being cut.
- Utilize safety features: The saw is equipped with safety interlocks on the doors and a connection for dust extraction. Ensure these are functioning correctly.
- Desconectar la energía: Always unplug the saw before performing any adjustments, maintenance, or when changing blades.
- Mantenga las manos alejadas: Never place hands or fingers near the blade while the saw is operating or connected to power. Use a push stick when cutting small pieces.
- Supervisar a los niños: Mantenga a los niños y a otras personas alejadas del área de operación.
3. Desembalaje y componentes incluidos
Carefully unpack all items from the packaging. Inspect for any damage that may have occurred during transit. Retain packaging for future storage or transport.
Accesorios incluidos:
- 1 x Band Saw Blade 140 cm (pre-assembled)
- 1 x Guía paralela
- 1 x Button Wrench
- 1 x Destornillador
- 3 x llaves hexagonales
Figure 3.1: Included accessories for the Parkside PBS 350 A1 band saw.
4. Configuración
4.1 Montaje inicial
- Montaje de la sierra: Securely mount the band saw to a stable workbench using appropriate fasteners (not included). Ensure the saw is level and cannot tip during operation.
- Ajuste de la mesa: The saw table is adjustable for miter cuts. Loosen the quick-tension system knob located beneath the table. Adjust the table to the desired angle using the angle scale (0° to +45°). Tighten the knob firmly to secure the table.
- Parallel Guide Installation: Insert the parallel guide into the slots on the saw table. Use the quick-lock mechanism to secure it for precise longitudinal cuts.
Figure 4.1: Adjustable saw table with quick-tension system and angle scale.
4.2 Blade Tension and Alignment
The band saw blade comes pre-assembled. Before first use, verify the blade tension and alignment. Refer to the markings on the saw for correct tensioning. The blade should be centered on the wheels and run smoothly without wobbling.
5. Instrucciones de funcionamiento
5.1 Encendido / Apagado
- Para encender: Press the green 'ON' button. The motor will start, and the blade will begin to move.
- Para apagar: Press the red 'OFF' button. The motor will stop, and the blade will slow down. Wait for the blade to come to a complete stop before leaving the machine.
Figure 5.1: Proper operation of the band saw with a push stick.
5.2 Ajuste de la altura de corte
The blade guard is adjustable for cutting heights up to 80 mm. Loosen the locking mechanism for the blade guard and slide it up or down to the desired height, ensuring it is just above the workpiece. Tighten the locking mechanism securely.
5.3 Técnicas de corte
- Cortes rectos: Use the parallel guide for precise straight cuts. Adjust the guide to the desired width and lock it in place. Feed the workpiece slowly and steadily against the guide and into the blade.
- Cortes a inglete: Adjust the saw table to the desired angle (0° to +45°) as described in Section 4.1. Secure the workpiece and feed it through the blade.
- Cortes curvos: For curved cuts, do not use the parallel guide. Slowly guide the workpiece freehand, following your marked line. Avoid forcing the material, especially on tight curves.
Figure 5.2: Guiding a workpiece through the band saw.
6. Mantenimiento
El mantenimiento regular garantiza la longevidad y el funcionamiento seguro de su sierra de cinta. Desconecte siempre la alimentación eléctrica antes de realizar cualquier mantenimiento.
6.1 Limpieza
- After each use, clean the saw dust and debris from the table, blade area, and motor housing using a brush or vacuum cleaner.
- Ensure the dust extraction port is clear.
Figure 6.1: Dust extraction port on the band saw.
6.2 Reemplazo de cuchilla
When the blade becomes dull or damaged, it must be replaced. The Parkside PBS 350 A1 is compatible with standard 140 cm band saw blades up to 12 mm wide.
- Desconecte la sierra de la fuente de alimentación.
- Open the safety interlocked doors to access the blade.
- Release the blade tension mechanism.
- Retire con cuidado la hoja vieja.
- Install the new blade, ensuring the teeth are pointing downwards towards the table.
- Re-tension the blade according to the saw's markings.
- Close the safety doors.
7. Solución de problemas
Esta sección aborda problemas comunes que puede encontrar con su sierra de cinta.
| Problema | Posible causa | Solución |
|---|---|---|
| La sierra no arranca | No power supply; Safety doors open; Faulty switch | Check power connection; Ensure safety doors are closed; Contact service if switch is faulty |
| Blade wobbles or drifts | Incorrect blade tension; Worn blade guides; Dull blade | Adjust blade tension; Inspect and replace blade guides if worn; Replace blade |
| El motor se calienta demasiado | Sobrecarga del motor; Ventilación insuficiente | Reduce feed rate; Ensure motor vents are clear; Allow motor to cool |
| Cortes ásperos | Dull blade; Incorrect blade type for material; Incorrect feed rate | Replace blade; Use appropriate blade; Adjust feed rate |
8. Especificaciones
| Característica | Especificación |
|---|---|
| Fabricante | Lidl |
| Número de modelo | PBS 350 A1 |
| Fuerza | 350 vatios |
| Volumentage | 230 voltios (CA) |
| Fuente de poder | Eléctrico con cable |
| Velocidad | 900 metros por minuto |
| Altura máxima de corte | 80 milímetros |
| Ancho de garganta | 200 milímetros |
| Superficie de la mesa | 300 x 300 mm |
| Ángulos de inglete | 0 ° a + 45 ° |
| Band Saw Blade Length | 140 centímetros |
| Max Blade Width | 12 milímetros |
| Diámetro de la rueda de banda | 20 centímetros |
| Características especiales | Depth adjustment, Spindle lock |
| Superficie recomendada | Madera |
| Material de la hoja | Acero aleado |
| Material del mango | Plástico |
| Color | Verde |
9. Garantía y soporte
Information regarding specific warranty terms and conditions for the Parkside PBS 350 A1 Band Saw is not available in the provided product details. Please refer to your purchase documentation or contact the retailer for warranty information.
For technical support or spare parts inquiries, please contact Lidl customer service or visit their official website. Information on spare parts availability is currently not provided.
