Manual del usuario del kit de control remoto y receptor Bluetooth 2.4G JIARUIXIN JR1858RXS

Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of the JIARUIXIN JR1858RXS 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for children's electric ride-on cars. Please read this manual thoroughly before use to ensure proper function and safety.

Contenido del paquete

• 1 x JR1858RXS Control Box
• 1 control remoto Bluetooth de 2.4 G

Comprobación de compatibilidad

Before installation, it is crucial to verify that this control box is compatible with your child's electric ride-on car. To do this:

1. Open the existing control box compartment on your electric ride-on car.
2. Compare the appearance and connector type of your original control box with the JR1858RXS control box shown in this manual.
3. Ensure the original control box is also a 5-pin type, as indicated by the "5P" designation for this model.

Image: JR1858RXS Control Box. This image displays the JR1858RXS control box, highlighting the 5-pin connector for compatibility verification with existing ride-on car systems.

Configuración e instalación

Instalación de las pilas del mando a distancia

The remote control requires two AAA (1.5V) batteries (not included). Follow these steps to install them:

1. Ubique el compartimiento de la batería en la parte posterior del control remoto.
2. Utilice un destornillador para aflojar el tornillo que fija la tapa de la batería.
3. Inserte dos pilas AAA, asegurándose de la polaridad correcta (+/-).
4. Vuelva a colocar la tapa de la batería y apriete el tornillo.

Image: Remote Control Battery Installation. This diagram illustrates how to open the battery compartment, insert two AAA batteries, and secure the cover on the remote control unit.

Instalación de la caja de control

Replace the old control box with the new JR1858RXS control box. Ensure all connections are secure and match the original wiring configuration.

Instrucciones de funcionamiento

Pairing the Remote Control (Frequency Matching)

The remote control must be paired with the control box for the first use or after replacing the remote control batteries. Follow these steps:

1. Ensure the remote controller has two AAA batteries installed.
2. Turn off the power switch on the electric ride-on vehicle.
3. On the remote control, hold down the "▲" (Forward) and "▼" (Backward) keys simultaneously for 3 seconds to initiate the pairing process. The red indicator light on the remote will begin to flicker.
4. While the remote's indicator light is flickering, turn on the power switch on the electric ride-on vehicle.
5. The red indicator light on the remote control will stop flickering, indicating that the pairing (code matching) was successful.

Image: JR1858RXS Control Box and Remote Control. This image shows both the JR1858RXS control box and the accompanying 2.4G Bluetooth remote control, ready for pairing and operation.

Funciones del control remoto

• "S" Key: Ajuste de velocidad.
  • 1 LED lit: Low speed
  • 2 LEDs lit: Medium speed
  • 3 LEDs lit: High speed
• "▲" Key: Movimiento hacia adelante.
• "▼" Key: Movimiento hacia atrás.
• "◀" Key: Turn Left.
• "▶" Key: Turn Right.
• "P" Key: Brake. Hold this key to apply the brake. All LED indicators will flicker when the brake is engaged.

Mantenimiento

• Mantenga la caja de control y el control remoto secos y limpios.
• Evite exponer los componentes a temperaturas extremas o a la luz solar directa.
• Regularly check battery compartments for corrosion. Remove batteries if the remote control will not be used for an extended period.
• Asegúrese de que todas las conexiones eléctricas permanezcan seguras.

Solución de problemas

Presupuesto

• Modelo: JR1858RXS
• Volumentage: 12 V CC
• Corriente de carga: Máximo 20 A
• Método de control: Bluetooth de 2.4G
• Frecuencia: 2.405 GHz - 2.485 GHz
• Baterías de control remoto: 2 pilas AAA de 1.5 V (no incluidas)
• Dimensiones del producto: 4.6 x 2.9 x 1.9 pulgadas (caja de control)
• Peso del artículo: 6.4 ounces (Control Box)
• Fabricante: JIARUIXIN

Información importante de seguridad

• This product is a replacement part and should be installed by an adult or under adult supervision.
• Ensure the electric ride-on car is turned off and disconnected from its power source before installing or replacing components.
• Utilice siempre el vol correctotage and current ratings as specified for your ride-on car.
• Keep small parts and batteries out of reach of young children to prevent choking hazards.
• Do not modify the control box or remote control. Unauthorized modifications can lead to malfunction or injury.