Manual del usuario de la bomba de piscina de alto rendimiento Star 025191

Introducción

Imagen: Star 025191 High Performance Pool Pump. This image displays the complete pool pump unit, highlighting its compact design and key components like the motor, pump housing, and transparent strainer lid.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Star 025191 High Performance Pool Pump. This pump is designed for use with in-ground or above-ground swimming pools up to 53,000 gallons, ensuring water clarity and hygiene. Please read this manual thoroughly before installation and operation.

The Star 025191 pump features a 1.5 HP single-speed motor, factory-wired for 230 Volts, and is constructed from corrosion-resistant thermoplastic for durability. It delivers a high volume flow rate of up to 110 GPM at 20’ TDH for efficient water circulation to filtration systems.

Instrucciones de seguridad importantes

Al instalar y utilizar este equipo eléctrico, siempre se deben seguir precauciones básicas de seguridad, incluidas las siguientes:

• Lea y siga todas las instrucciones.
• PELIGRO: Risk of electrical shock. Connect only to a grounded receptacle protected by a ground-fault circuit interrupter (GFCI).
• ADVERTENCIA: Para reducir el riesgo de lesiones, no permita que los niños utilicen este producto.
• ADVERTENCIA: This pump is for permanent installation only. Do not use with storable pools.
• Ensure the electrical supply matches the pump's voltage requirements (115V or 230V). The pump is factory-wired for 230V.
• All wiring must be performed by a qualified electrician and comply with local codes and regulations.
• Always disconnect power to the pump before servicing or performing maintenance.
• No opere la bomba si ha sufrido algún daño.
• Keep all connections dry and away from water.

Contenido del paquete

Verifique que todos los componentes estén presentes en el paquete antes de comenzar la instalación.

Imagen: Package Contents Diagram. This illustration details the main pump unit (A) and the included connection accessories: 2-inch slip union adapters (B), 1.5-inch slip union adapters (C), and couplings (D).

Configuración e instalación

Proper installation is crucial for the pump's performance and longevity. Refer to the installation diagram and follow these steps carefully.

1. Selección del sitio

• Install the pump as close to the pool as possible to minimize friction loss from long suction lines.
• Ensure the pump is installed on a firm, level base that can support its weight and prevent vibration.
• Provide adequate ventilation around the motor for cooling.
• Protect the pump from excessive moisture and direct sunlight.

2. Conexiones de plomería

The pump is designed to connect to either 1.5-inch or 2-inch pipe using the included slip union adapters and couplings.

1. Apply thread sealant to all threaded connections to ensure a watertight seal.
2. Connect the appropriate slip union adapters (1.5" or 2") to the pump's inlet and outlet ports.
3. Use the couplings to connect the pump to your existing pool plumbing. Ensure all connections are tight to prevent air leaks, especially on the suction side.

Imagen: Installation Diagram and Performance Data. This image provides a visual guide for connecting the pump to an in-ground pool system and includes a table detailing the pump's flow rate (GPM) at various Total Dynamic Head (TDH) levels.

3. Conexiones eléctricas

The Star 025191 pump is factory-wired for 230 Volts. If your electrical supply is 115 Volts, consult a qualified electrician for proper rewiring. The pump includes a 3 ft pigtail cord with ring terminals for connection.

• Ensure the power supply is disconnected at the circuit breaker before making any electrical connections.
• Connect the pump's pigtail cord to a dedicated circuit protected by a Ground-Fault Circuit Interrupter (GFCI).
• All electrical connections must comply with national and local electrical codes.

Instrucciones de funcionamiento

1. Cebado de la bomba

Before starting the pump for the first time, or after the pump has been drained, it must be primed.

1. Asegúrese de que el nivel del agua de la piscina sea adecuado.
2. Abra todas las válvulas de succión y retorno en el sistema de plomería de la piscina.
3. Remove the transparent strainer cover and fill the strainer basket housing with water until it overflows.
4. Replace the strainer cover, ensuring it is securely tightened to prevent air leaks.
5. Turn on the power to the pump. The pump should begin to draw water and expel air from the return lines.
6. If the pump does not prime within 5 minutes, turn it off, re-prime, and check for air leaks in the suction line.

2. Operación normal

• Once primed, the pump will operate continuously, circulating water through your filtration system.
• Monitor the pressure gauge on your filter (if applicable) to ensure it is within the normal operating range. An unusually high pressure reading may indicate a dirty filter or blockage.
• Regularly check the transparent strainer cover to see if the basket needs cleaning.

Mantenimiento

Regular maintenance ensures optimal performance and extends the life of your pool pump.

1. Limpieza del filtro

The large strainer basket is designed to collect debris before it reaches the pump impeller. The transparent cover allows for easy visual inspection.

1. Apague la bomba y desconecte la energía en el disyuntor.
2. Rotate the transparent strainer cover counter-clockwise to remove it.
3. Lift out the strainer basket and empty any collected debris.
4. Enjuague bien la cesta con agua.
5. Inspect the O-ring on the strainer cover for cracks or wear. Replace if necessary.
6. Coloque la cesta limpia nuevamente en la carcasa, asegurándose de que esté colocada correctamente.
7. Replace the strainer cover, tightening it clockwise until snug. Do not overtighten.
8. Re-prime the pump as described in the "Operating Instructions" section.

2. Preparación para el invierno

If you live in an area where temperatures drop below freezing, proper winterization is essential to prevent damage.

• Apague la bomba y desconecte la energía.
• Drain all water from the pump by removing the drain plugs (if applicable) or by disconnecting plumbing.
• Store the pump in a dry, protected area, or cover it securely if it must remain outdoors.

Solución de problemas

This section addresses common issues you might encounter with your pool pump. For problems not listed here, contact customer support.

Presupuesto

Detailed technical specifications for the Star 025191 High Performance Pool Pump.

Imagen: Product Dimensions and Specifications. This image provides a detailed technical drawing with key dimensions of the pump and a table summarizing its electrical and performance characteristics.

Garantía

The Star 025191 High Performance Pool Pump is covered by a Garantía limitada de 1 años A partir de la fecha de compra. Esta garantía cubre defectos de materiales y mano de obra en condiciones normales de uso y servicio.

For warranty claims or to understand the full terms and conditions, please refer to the warranty card included with your product or contact Star Water Systems customer support.

Note: This product is not available for shipment to California.

Atención al cliente

For technical assistance, replacement parts, or warranty inquiries, please contact Star Water Systems customer support.

• Websitio: www.starwatersystems.com (Examp(el enlace real puede variar)
• Teléfono: Consulte el embalaje de su producto o las instrucciones del fabricante. webSitio para números de contacto actuales.

Cuando se comunique con el soporte técnico, tenga a mano el número de modelo (025191) y la fecha de compra.